High temperature deformation behavior of Al0.2CoCrFeNiMo0.5 high entropy alloy: Dynamic strain ageing
Source abstract
Abstract
High temperature deformation behavior of Al 0.2CoCrFeNiMo 0.5 high entropy alloy was investigated in fully annealed condition. Microstructural studies were performed using SEM and EBSD, prior to testing, clearly shows a fully annealed microstructure consists of secondary sigma phase in the FCC matrix. Uniaxial tensile tests were performed in the temperature range of 25–900 °C at an initial strain rate of 10 −3 s −1. Serrated plastic flow behavior was observed in the intermediate temperature range of 400–600 °C. The influence of the strain rate on the critical strain corresponding to the onset of serrations were studied which indicated that the serration behavior was type A and type C. Strain rate sensitivity close to zero, decrease in the elongation and microstructural investigations suggesting that dynamic strain aging (DSA) is the responsible mechanism for the serrated flow and that the Al solute interactions with dislocations might be the possible reason for DSA. Additionally, the fractography analysis clearly indicates that there is transition in the failure mode from the transgranular fracture to the intergranular fracture.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. T.H. Courtney, Mechanical Behavior of Materials - Second Edition, 2009.
2. Flow behavior and microstructures of powder metallurgical CrFeCoNiMo0.2 high entropy alloy during high temperature deformation10.1016/j.msea.2017.02.064 ↗
3. Deformation mechanism during high-temperature tensile test in an eutectic high-entropy alloy AlCoCrFeNi2.110.1016/j.msea.2018.03.078 ↗
4. On temperature and strain-rate dependence of flow serration in HfNbTaTiZr high-entropy alloy10.1016/j.scriptamat.2021.113919 ↗
5. LXXXVI. A note on the Portevin-Le Chatelier effect, London, Edinburgh, Dublin Philos
6. Fu · Mater. Sci. Eng. A tensile Prop. serrated fl ow Behav. A thermomechanically Treat. CoCrFeNiMn High. -entropy Alloy · 2017 · 690 · 418
7. Mechanical properties and deformation mechanisms of a Ni2Co1Fe1V0.5Mo0.2 medium-entropy alloy at elevated temperatures10.1016/j.actamat.2021.116982 ↗
8. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
9. Wear resistance and high-temperature compression strength of Fcc CuCoNiCrAl 0
10. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
11. High throughput discovery and design of strong multicomponent metallic solid solutions
12. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
13. High-entropy alloys: a critical review high-entropy alloys
14. Materials science & engineering a elevated temperature microstructural stability in cast AlCuMnZr alloys through solute segregation10.1016/j.msea.2019.138279 ↗
15. A multi-phase CrMnFeCoNiAl0.75 high-entropy alloy with high strength at intermediate temperature10.1016/j.intermet.2020.106744 ↗
16. Metallurgical alchemy by ultra-severe plastic deformation via high-pressure torsion process10.2320/matertrans.MF201914 ↗
17. On microstructure and mechanical performance of AlCoCrFeMo 0.5Ni x high-entropy alloys10.1016/j.intermet.2012.09.008 ↗
18. Microstructures and compressive properties of multicomponent AlCoCrFeNiMox alloys10.1016/j.msea.2010.07.028 ↗
19. Effect of molybdenum on phases, microstructure and mechanical properties of Al0.5CoCrFeMoxNi high entropy alloys10.1016/j.jallcom.2018.02.003 ↗
20. Effect of annealing on microstructure and mechanical properties of Al0.5CoCrFeMoxNi high-entropy alloys10.3390/e20110812 ↗
21. Effect of aluminum content on microstructure and mechanical properties of Alx CoCrFeMo0.5Ni high-entropy alloys10.1007/s11837-013-0753-6 ↗
22. M. Theses, Z. Tang, Trace: Tennessee Research and Creative Exchange Processing, Microstructures, and Mechanical Behavior of High-Entropy Alloys, (2012).
23. A promising new class of high-temperature alloys: Eutectic high-entropy alloys10.1038/srep06200 ↗
24. Dual-phase high-entropy alloys for high-temperature structural applications10.1016/j.jallcom.2017.09.089 ↗
25. Deformation mechanisms of Al0.1CoCrFeNi at elevated temperatures10.1016/j.msea.2016.12.110 ↗
26. High-temperature high-entropy alloys AlxCo15Cr15Ni70-x based on the Al-Ni binary system10.1016/j.msea.2018.03.058 ↗
27. Dynamic recrystallization behaviour of AlxCoCrFeNi high entropy alloys during high-temperature plane strain compression10.1016/j.msea.2018.12.102 ↗
28. Structure and high temperature mechanical properties of novel non-equiatomic Fe-(Co, Mn)-Cr-Ni-Al-(Ti) high entropy alloys10.1016/j.intermet.2018.09.010 ↗
29. Microstructure and tensile behavior of Al8Co17Cr 17Cu8Fe17Ni33 (at%) high-entropy alloy10.1007/s11837-013-0756-3 ↗
30. Effects of temperature on serrated flows of Al0.5CoCrCuFeNi high-entropy alloy10.1007/s11837-015-1580-8 ↗
31. On the superior hot hardness and softening resistance of AlCoCrxFeMo0.5Ni high-entropy alloys10.1016/j.msea.2011.01.072 ↗
32. Microstructure and mechanical properties of new AlCoxCrFeMo 0.5Ni high-entropy alloys10.1002/adem.200900171 ↗
33. Microstructure and mechanical properties of wrought Al0.2CoCrFeNiMo0.5 high entropy alloy using gas tungsten arc welding process10.1016/j.matlet.2022.132109 ↗
34. Overview of dynamic strain aging and associated phenomena in Fe-Mn-C austenitic steels10.2355/isijinternational.ISIJINT-2018-237 ↗
35. Dynamic strain aging and twin formation during warm deformation of a novel medium-entropy lightweight steel10.1016/j.jmrt.2022.01.057 ↗
36. Dynamic strain aging studied at the atomic scale10.1016/j.actamat.2014.12.028 ↗
37. High temperature deformation mechanism and microstructural evolution of relatively lightweight AlCoCrFeNi high entropy alloy10.1016/j.intermet.2020.106707 ↗
38. Role of Si modification on the compressive flow behavior of Al-Si based alloy10.1016/j.matchar.2015.10.036 ↗
39. Mechanical properties and microstructure of a NiCrFeCoMn high-entropy alloy deformed at high strain rates10.3390/e20110892 ↗
40. Dynamic strain aging of Al0.3CoCrFeNi high entropy alloy single crystals10.1016/j.scriptamat.2015.06.022 ↗