journal article·2022-12

Cobalt phosphide decorated on reduced graphene oxide with enhanced microwave absorption performance

Wu Fan, Hongjiao Qu, Qiliang Zhao, Xin Sun, Tao Wang, Xingyu Yu, Junjie Pan, Jianping He

Publisher page

Abstract

The application of microwave absorbing materials is one of the important means to reduce electromagnetic pollution. Transition metal phosphides as absorbers with high conductivity attract researchers` interest. Therefore, in this paper, the novel cobalt phosphide wrapped by reduced graphene oxide (CoP/RGO) were prepared by simple hydrothermal and phosphating reaction. Meanwhile, the introduction of RGO is beneficial to enhance the conductive loss and polarization loss of materials. Compared with most of the reported transition metal phosphate-based absorbents, CoP/RGO has a better microwave absorption (MA) performance. The minimum reflect loss (RL min) value can reach − 52.60 dB with 2.05 mm, and the maximum effective absorption bandwidth (EAB, RL<−10 dB) can reach 5.04 GHz at 2.25 mm. The superior MA performance of CoP/RGO composites makes it possible to be a candidate as an absorber.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electromagnetic wave absorption materials · Advanced Antenna and Metasurface Technologies · Metamaterials and Metasurfaces Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Polymetallic MOF-derived corn-like composites for magnetic-dielectric balance to facilitate broadband electromagnetic wave absorption10.1016/j.carbon.2021.09.041 ↗
2. Graphitic carbon nitride (g-C3N4) in situ polymerization to synthesize MOF-Co@CNTs as efficient electromagnetic microwave absorption materials10.1016/j.carbon.2021.02.044 ↗
3. Growth of magnetic metals on carbon microspheres with synergetic dissipation abilities to broaden microwave absorption10.1016/j.jmst.2021.07.044 ↗
4. Coral-like carbon-based composite derived from layered structure Co-MOF-71 with outstanding impedance matching and tunable microwave absorption performance10.1016/j.jmst.2021.07.047 ↗
5. Enhanced electromagnetic wave absorption of three-dimensional porous Fe3O4/C composite flowers10.1021/acssuschemeng.8b03097 ↗
6. Magnetic vortex core-shell Fe3O4@C nanorings with enhanced microwave absorption performance10.1016/j.carbon.2019.10.030 ↗
7. Simultaneous manipulation of interfacial and defects polarization toward Zn/Co phase and ion hybrids for electromagnetic wave absorption10.1002/adfm.202106677 ↗
8. Thickness-controllable synthesis of MOF-derived Ni@N-doped carbon hexagonal nanoflakes with dielectric-magnetic synergy toward wideband electromagnetic wave absorption10.1016/j.cej.2021.130940 ↗
9. Regulating pyrolysis strategy to construct CNTs-linked porous cubic Prussian blue analogue derivatives for lightweight and broadband microwave absorption10.1016/j.cej.2021.132879 ↗
10. Size-dependent oxidation-induced phase engineering for MOFs derivatives via spatial confinement strategy toward enhanced microwave absorption10.1093/femsle/fnac102 ↗
11. Optimization of Fe@Ag core–shell nanowires with improved impedance matching and microwave absorption properties10.1016/j.cej.2021.132878 ↗
12. Ferrero Rocher® chocolates-like FeCo/C microspheres with adjustable electromagnetic properties for effective microwave absorption10.1016/j.jallcom.2020.157568 ↗
13. Tunable defects and interfaces of hierarchical dandelion-like NiCo2O4 via Ostwald ripening process for high-efficiency electromagnetic wave absorption10.1016/j.cej.2021.132547 ↗
14. Improvement of interfacial polarization and impedance matching for two-dimensional leaf-like bimetallic (Co, Zn) doped porous carbon nanocomposites with broadband microwave absorption10.1016/j.apsusc.2019.144894 ↗
15. Hierarchical CoFe2O4@PPy hollow nanocubes with enhanced microwave absorption10.1016/j.apsusc.2021.151752 ↗
16. Multi-scale structural nitrogen-doped rGO@CNTs composites with ultra-low loading towards microwave absorption10.1016/j.apsusc.2020.147943 ↗
17. Correlating the gradient nitrogen doping and electromagnetic wave absorption of graphene at gigahertz10.1016/j.jallcom.2020.157113 ↗
18. 3D porous coral-like Co1.29Ni1.71O4 microspheres embedded into reduced graphene oxide aerogels with lightweight and broadband microwave absorption10.1016/j.jcis.2021.11.176 ↗
19. Flexible reduced graphene oxide@Fe3O4/silicone rubber composites for enhanced microwave absorption10.1016/j.apsusc.2021.151270 ↗
20. Oxygen vacancies regulated microwave absorption properties of reduced graphene oxide/multi-walled carbon nanotubes/cerium oxide ternary nanocomposite10.1016/j.jallcom.2019.152944 ↗
21. Electronic redistribution: construction and modulation of interface engineering on CoP for enhancing overall water splitting10.1002/adfm.201909618 ↗
22. Porous Ni5P4 as a promising cocatalyst for boosting the photocatalytic hydrogen evolution reaction performance10.1016/j.apcatb.2020.119144 ↗
23. Interfacial engineering of MoO2 -FeP heterojunction for highly efficient hydrogen evolution coupled with biomass electrooxidation
24. One-step MOFs-assisted synthesis of intimate contact MoP-Cu3P hybrids for photocatalytic water splitting10.1016/j.cej.2019.123337 ↗
25. Constructing Ni12P5/Ni2P Heterostructures to boost interfacial polarization for enhanced microwave absorption performance10.1021/acsami.0c16287 ↗
26. Optimization of microwave absorption properties of C/NiP microfiber composites10.1016/j.ceramint.2020.11.143 ↗
27. Microwave absorption enhancement of nickel cobalt phosphides by decorating on reduced graphene oxide10.1016/j.jssc.2019.06.019 ↗
28. Self-assembled 3D flower-like composites of heterobimetallic phosphides and carbon for temperature-tailored electromagnetic wave absorption10.1021/acsami.9b14873 ↗
29. Mixed-dimensional hierarchical configuration of 2D Ni2P nanosheets anchored on 1D silk-derived carbon fiber for extraordinary electromagnetic wave absorption10.1016/j.jmst.2021.05.066 ↗
30. Enhanced microwave absorbing ability of carbon fibers with embedded FeCo/CoFe2O4 nanoparticles10.1021/acsami.1c09430 ↗
31. Enhanced microwave absorption performance of graphene/doped Li ferrite nanocomposites10.1016/j.apt.2021.10.020 ↗
32. Co2P nanoparticles for microwave absorption10.1016/j.mtnano.2018.04.004 ↗
33. Ni2P nanocrystals coated on carbon nanotubes as enhanced lightweight electromagnetic wave absorbers10.1016/j.carbon.2019.12.061 ↗
34. FeP nanoparticles: a new material for microwave absorption10.1039/C8QM00003D ↗
35. Nickel/nickel phosphide composite embedded in N-doped carbon with tunable electromagnetic properties toward high-efficiency microwave absorption10.1016/j.compositesa.2020.106141 ↗
36. The monodisperse nickel phosphide mosaic nanocrystals in situ grown on reduced graphene oxide with excellent electromagnetic wave absorption properties10.1016/j.jssc.2021.122234 ↗
37. The double-coating structure of C/Cu/NiP microfiber composites for enhanced microwave absorption properties10.1007/s10854-022-08349-9 ↗
38. Yolk-shelled Co@SiO2@Mesoporous carbon microspheres: construction of multiple heterogeneous interfaces for wide-bandwidth microwave absorption10.1016/j.jcis.2021.09.028 ↗
39. Structure design of Prussian blue analogue derived CoFe@C composite with tunable microwave absorption performance10.1016/j.apsusc.2021.151334 ↗
40. Controllable synthesis of Ni/NiO@porous carbon hybrid composites towards remarkable electromagnetic wave absorption and wide absorption bandwidth10.1016/j.jmst.2021.01.073 ↗
41. Synthesis of MOF-derived Fe7S8/C rod-like composites by controlled proportion of carbon for highly efficient electromagnetic wave absorption10.1016/j.compositesa.2020.106246 ↗
42. Construction of 1D heterostructure NiCo@C/ZnO nanorod with enhanced microwave absorption
43. 0D–1D-2D multidimensionally assembled Co9S8/CNTs/MoS2 composites for ultralight and broadband electromagnetic wave absorption10.1016/j.cej.2021.130132 ↗