journal article·2022-11

Bi2Se0.5Te2.5/S, N-doped reduced graphene oxide as anode materials for high-performance Lithium ion batteries

Lifen Li, Jiachang Zhao, Hongbin Zhao, Jianfeng Mao

Publisher page

Abstract

High energy density, power density and long cycle life are the ultimate goals of lithium ion batteries (LIBs) to meet the need of energy storage. However, it is still a challenge to achieve them at the same time. In this work, Bi 2Se 0.5Te 2.5 /S, N-doped reduced graphene oxide (rGO) nanosheets composite has been synthesized by solvothermal method and investigated as anode materials for LIBs. The nanosheets are triumplantly fixed on rGO. Nitrogen doping can improve the electrical conductivity, while sulfur provide more active sites. The Bi 2Se 0.5Te 2.5 /S, N-rGO exhibits superior electrochemical performance. The specific discharge capacity of the Bi 2Se 0.5Te 2.5/S, N-rGO composites at 100 mA g −1 is 500 mAh g −1after 200 cycles, and which is still on the rise. Dynamics analysis clearly shows that the lithium storage of the as-prepared samples is on account of diffusion process, whose capacitive contribution reaches 92 % of the total charge storage at a scanning rate of 1.0 mV s −1, and contributes to excellent cycling performance at high current densities. This work shows that Bi 2Se 0.5Te 2.5 /S, N-rGO has broad application prospects in LIBs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Graphene research and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Reduced graphene oxide/tin-antimony nanocomposites as anode materials for advanced sodium-ion batteries10.1021/acsami.5b08274 ↗
2. The impact of electrode with carbon materials on safety performance of lithium-ion batteries: a review10.1016/j.carbon.2022.02.011 ↗
3. Exploring sodium storage mechanism of topological insulator Bi2Te3 nanosheets encapsulated in conductive polymer10.1016/j.ensm.2021.06.004 ↗
4. Electrochemical phase evolution of tetradymite-type Bi2Te3 in lithium, sodium and potassium ion half cells10.1016/j.jallcom.2020.155621 ↗
5. A one-pot method to fabricate reduced graphene oxide (rGO)-coated Si@SiOx@β-Bi2O3/Bi composites for lithium-ion batteries10.1016/j.electacta.2021.138857 ↗
6. Enhanced performance of lithium sulfur battery with a reduced graphene oxide coating separator10.1149/2.0891508jes ↗
7. Lithium–tellurium batteries based on tellurium/porous carbon composite10.1039/C4TA02075H ↗
8. Tellurium@ordered macroporous carbon composite and free-standing tellurium nanowire mat as cathode materials for rechargeable lithium-tellurium batteries10.1002/aenm.201401999 ↗
9. Three-dimensional hierarchical reduced graphene oxide/tellurium nanowires: a high-performance freestanding cathode for Li-Te batteries10.1021/acsnano.6b04622 ↗
10. Advanced high‐performance potassium–chalcogen (S, Se, Te) batteries
11. Carbon/two-dimensional MoTe2 core/shell-structured microspheres as an anode material for Na-ion batteries10.1039/C6NR07158A ↗
12. A Se-doped S@CMK3 composite as a high-performance cathode for magnesium–sulfur batteries with Mg2+/Li+ hybrid electrolytes, The10.1021/acs.jpcc.1c07324 ↗
13. Effect of annealing on the structure of Bi2Te3-Bi2Se3 films10.1134/S1063782610060230 ↗
14. Features of the charge-transport mechanism in layered Bi2Te3 single crystals doped with chlorine and terbium10.1134/S1063782611010027 ↗
15. Self-assembly of Bi2Te3-nanoplate/graphene-nanosheet hybrid by one-pot route and its improved Li-storage properties10.3390/ma5071275 ↗
16. Hierarchical Bi2Se3–xSx microarchitectures assembled from ultrathin polycrystalline nanosheets: solvothermal synthesis and good electrochemical performance
17. Bismuth selenide nanocrystalline array electrodes for high-performance sodium-ion batteries
18. A novel α‐MoO3/single‐walled carbon nanohorns composite as high‐performance anode material for fast‐charging lithium‐ion battery
19. An overview of graphene and its derivatives reinforced metal matrix composites: preparation, properties and applications10.1016/j.carbon.2020.08.040 ↗
20. Bismuth metal–organic frameworks derived bismuth selenide nanosheets/nitrogen–doped carbon hybrids as anodes for Li–ion batteries with improved cyclic performance10.1016/j.ceramint.2019.03.068 ↗
21. Electrochemical performance of Bi2Te3/GO composite anode for LIB application10.1111/ijac.13445 ↗
22. CNTs@C@Bi2Se3 composite as an improved-performance anode for lithium ion batteries10.1016/j.ceramint.2017.09.124 ↗
23. Conversion-alloying dual mechanism anode: nitrogen-doped carbon-coated Bi2Se3 wrapped with graphene for superior potassium-ion storage10.1016/j.ensm.2021.04.019 ↗
24. Few-layered tin sulfide nanosheets supported on reduced graphene oxide as a high-performance anode for potassium-ion batteries10.1002/smll.201804806 ↗
25. X. Graphene-loaded Bi2Se3: a conversion-alloying-type anode material for ultrafast gravimetric and volumetric Na storage10.1021/acsami.8b09538 ↗
26. Effect of the Se → Te substitutions on thermal properties of binary Bi2Se3 semiconductor10.1142/S0217984920501560 ↗
27. Morphology and nanostructured features in BiSbTe and BiSeTe solid solutions obtained by hot extrusion10.1016/j.mseb.2021.115270 ↗
28. Top-down fabrication of nano-scaled Bi2Se0.3Te2.7 associated by electrochemical Li intercalation10.1039/C0DT01281E ↗
29. Enabling the fabrication of advanced NiCo/Bi alkaline battery via MOF-hydrolyzing derived cathode and anode, Materials Today
30. Polyborosilazane derived ceramics - Nitrogen sulfur dual doped graphene nanocomposite anode for enhanced lithium ion batteries10.1016/j.electacta.2018.11.088 ↗
31. Chemical bonding boosts nano-rose-like MoS2 anchored on reduced graphene oxide for superior potassium-ion storage10.1016/j.nanoen.2019.103868 ↗
32. Enhanced electronic conductivity and sodium-ion adsorption in N/S co-doped ordered mesoporous carbon for high-performance sodium-ion battery anode10.1016/j.jpowsour.2018.12.002 ↗
33. Defect engineering on electrodematerials for rechargeable batteries
34. Structural and electrochemical studies of undoped and In3+-doped co-binary Cu2−xTe and Bi2Te3 thin films for aqueous Na–S batteries10.1016/j.ceramint.2019.05.289 ↗
35. Bi2Se3@C rod-like architecture with outstanding electrochemical properties in lithium/potassium-Ion batteries10.1021/acsaem.0c02056 ↗
36. Exfoliation of layered topological insulators Bi2Se3 and Bi2Te3 via electrochemistry10.1021/acsnano.6b07096 ↗
37. BiSbS3@N-doped carbon core-shell nanorods as efficient anode materials for sodium-ion batteries10.1039/C9DT01880H ↗
38. Solvothermal synthesis and electrochemical properties of S-doped Bi2Se3 hierarchical microstructure assembled by stacked nanosheets10.1039/C6RA01301E ↗
39. Enhanced thermoelectric performance of n-type Bi2Te3 alloyed with low cost and highly abundant sulfur10.1016/j.matchemphys.2020.123598 ↗
40. Hierarchical bismuth composite for fast lithium storage: carbon dots tuned interfacial interaction
41. Microstructural characterization of sulfur-doped Bi2Te3 crystals10.1016/j.matchar.2016.02.009 ↗
42. Hierarchical CoTe2 nanowire array: an effective oxygen evolution catalyst in alkaline media10.1021/acssuschemeng.7b04309 ↗
43. SnSe coupled with nitrogen/sulfur dual-doped rGO for superior anode of lithium ion batteries10.1007/s11581-021-04159-x ↗
44. Boosting lithium-ion storage performance by synergistically coupling Zn0.76Co0.24S with N-/S-doped carbon and carbon nanofiber10.1016/j.cej.2018.03.062 ↗
45. Graphene-based electrodes for electrochemical energy storage10.1039/c3ee23870a ↗
46. Bio-inspired engineering of Bi2S3-PPy yolk-shell composite for highly durable lithium and sodium storage10.1016/j.nanoen.2017.01.033 ↗
47. One-step solvothermal synthesis of BiSbTe3/N-doped reduced graphene oxide composite as lithium-ion batteries anode materials10.1016/j.ces.2020.115829 ↗
48. Carbon-encapsulated Bi2Te3 derived from metal-organic framework as anode for highly durable lithium and sodium storage10.1016/j.jallcom.2020.155536 ↗
49. In situ synthesis of CuCo2S4@N/S-doped graphene composites with pseudocapacitive properties for high-performance lithium-ion batteries10.1021/acsami.8b00632 ↗
50. PbSe/sulfur-doped carbon nanocube composites prepared from Pb-MOF precursors as anode materials for lithium and sodium-ion batteries10.1016/j.jallcom.2021.159942 ↗
51. Three-dimensional porous aerogel assembly from ultrathin rGO@SnO2 nanosheets for advanced lithium-ion batteries10.1016/j.compositesb.2021.109591 ↗