journal article·2022-10

On the dual-stage partial recrystallization and the corresponding mechanical response of the Cantor alloy

Wentian Chen, Na Li, Feng Wang, Ji Gu, Junyang He, Min Song

Publisher page

Abstract

In this work, we systematically characterized the microstructural evolution of the Cantor alloy, FeCoNiCrMn, during recrystallization at a typical mid-temperature, 700 ℃ , and carefully bridged up with the mechanical responses. Apart from the overall trade-off phenomenon, we evidenced the presence of a two-stage strength-ductility variation, where before 5 min the yield strength drops fast without apparent ductility compensation while in the following 5–20 min the ductility increases remarkably. The first stage covers the transition from cold-rolled non-recrystallized microstructure to a eutectic-like stacking of recrystallized regions and new non-recrystallized regions with a different texture. The second stage then includes the vanishing of the new non-recrystallized regions and the completing of recrystallization. This dual-stage transition is to our knowledge never reported before for HEAs, and we suppose the occurrence is associated with the initial inhomogeneity caused by cold-rolling, and thus the different pathways for such inhomogeneous microstructure to evolve, energetically, during heating.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
3. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
4. Alloy design and properties optimization of high-entropy alloys10.1007/s11837-012-0366-5 ↗
5. Guidelines in predicting phase formation of high-entropy alloys10.1557/mrc.2014.11 ↗
6. Effect of alloying elements on microstructure and properties of multiprincipal elements high-entropy alloys10.1016/j.jallcom.2008.07.124 ↗
7. Solid-solution phase formation rules for multi-component alloys10.1002/adem.200700240 ↗
8. Grain size dependent deformation behavior of a metastable Fe40Co20Cr20Mn10Ni10 high-entropy alloy10.1016/j.jallcom.2021.160876 ↗
9. Gradient cell-structured high-entropy alloy with exceptional strength and ductility10.1126/science.abj8114 ↗
10. A non-equiatomic FeNiCoCr high-entropy alloy with excellent anti-corrosion performance and strength-ductility synergy10.1016/j.corsci.2021.109341 ↗
11. Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off10.1038/nature17981 ↗
12. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
13. Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation10.1016/j.actamat.2015.06.025 ↗
14. Second phase formation in the CoCrFeNiMn high entropy alloy after recrystallization annealing10.1016/j.matlet.2016.08.088 ↗
15. Effects of carbon on the microstructures and mechanical properties of FeCoCrNiMn high entropy alloys10.1016/j.msea.2019.01.050 ↗
16. Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures10.1016/j.actamat.2016.04.005 ↗
17. Annealing-induced abnormal hardening in a cold rolled CrMnFeCoNi high entropy alloy10.1016/j.scriptamat.2018.11.042 ↗
18. Regulating the strength and ductility of a cold rolled FeCrCoMnNi high-entropy alloy via annealing treatment10.1016/j.msea.2019.04.025 ↗
19. Characteristics of structures of incomplete recrystallization and their effect on the properties of steels10.1007/BF00651705 ↗
20. Incomplete recrystallization and subsequent microstructural evolution during intercritical annealing in cold-rolled low carbon steels10.2355/isijinternational.50.469 ↗
21. Heterostructured materials: superior properties from hetero-zone interaction10.1080/21663831.2020.1796836 ↗
22. Effect of annealing temperature on microstructure and mechanical properties of a severe cold-rolled FeCoCrNiMn high-entropy alloy10.1007/s11661-019-05231-y ↗
23. A study of recovery and primary recrystallization mechanisms in a Zr-2Hf alloy10.1016/j.actamat.2005.07.034 ↗
24. Recovery of cold-worked Al0.3CoCrFeNi complex concentrated alloy through twinning assisted B2 precipitation10.1016/j.actamat.2020.10.071 ↗
25. Competition between dynamic recovery and recrystallization during hot deformation for TC18 titanium alloy10.1016/j.msea.2015.03.071 ↗
26. Effect of recovery on the recrystallization texture of an Al-Mg alloy10.1016/j.scriptamat.2007.07.008 ↗
27. Recrystallization behavior of CoCrCuFeNi high-entropy alloy10.1007/s11661-014-2594-5 ↗
28. Effect of annealing on microstructure and mechanical properties of an ultrafine-structured Al-containing FeCoCrNiMn high-entropy alloy produced by severe cold rolling10.1016/j.msea.2020.139446 ↗
29. Trade-off between tensile property and formability by partial recrystallization of CrMnFeCoNi high-entropy alloy10.1016/j.msea.2017.07.079 ↗
30. Heterogeneous structure-induced strength-ductility synergy by partial recrystallization during friction stir welding of a high-entropy alloy10.1016/j.matdes.2020.109238 ↗
31. Yield strength-ductility trade-off breakthrough in Co-free Fe40Mn10Cr25Ni25 high-entropy alloys with partial recrystallization
32. Micromechanical behaviors of Fe20Co30Cr25Ni25 high entropy alloys with partially and completely recrystallized microstructures investigated by in-situ high-energy X-ray diffraction10.1007/s11661-021-06340-3 ↗
33. A TWIP-TRIP quinary high-entropy alloy: tuning phase stability and microstructure for enhanced mechanical properties10.1016/j.msea.2020.140441 ↗
34. Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy10.1038/ncomms15719 ↗
35. Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy10.1016/j.jallcom.2013.10.237 ↗
36. Recrystallization of stabilized ferritic stainless steel sheet10.1007/s11661-005-0091-6 ↗
37. Rolling textures of pure nickel, nickel-iron and nickel-cobalt alloys10.1016/0956-7151(95)90169-8 ↗
38. The brass-type texture and its deviation from the copper-type texture10.1016/j.pmatsci.2008.09.002 ↗
39. Investigation of the orientation dependence of recovery in low-carbon steel by use of single orientation determination10.1002/srin.199501116 ↗
40. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
41. Reaction kinetics in processes of nucleation and growth
42. The enhanced static recrystallization kinetics of a non-equiatomic high entropy alloy through the reverse transformation of strain induced martensite10.1016/j.jallcom.2019.07.105 ↗
43. Static recrystallization and texture evolution of cold-rolled powder metallurgy CoCrFeNiN0.07 high-entropy alloy10.1016/j.jallcom.2021.158602 ↗
44. Experimental investigations into kinetcis of rerystallisation of cold rolled nickel10.1179/mst.1998.14.5.411 ↗
45. Static recrystallization and grain growth behaviour of Al0.3CoCrFeNi high entropy alloy10.1016/j.msea.2019.03.088 ↗
46. Bulk tracer diffusion in CoCrFeNi and CoCrFeMnNi high entropy alloys10.1016/j.actamat.2017.12.052 ↗
47. Sluggish diffusion in Co-Cr-Fe-Mn-Ni high-entropy alloys10.1016/j.actamat.2013.04.058 ↗
48. Grain growth and the Hall-Petch relationship in a high-entropy FeCrNiCoMn alloy10.1016/j.scriptamat.2012.12.002 ↗
49. Recrystallization behavior of a high-manganese steel: experiments and simulations10.1016/j.actamat.2015.08.057 ↗
50. Phase stability and kinetics of σ-phase precipitation in CrMnFeCoNi high-entropy alloys10.1016/j.actamat.2018.09.040 ↗
51. Carbide precipitation strengthening in fine-grained carbon-doped FeCoCrNiMn high entropy alloy10.1016/j.jallcom.2019.06.204 ↗