Hot workability and microstructural evolution of a nickel-based superalloy fabricated by laser-based directed energy deposition
Source abstract
Abstract
Recently, an innovative process chain has been investigated and proposed, using laser-based directed energy deposition technology to produce pre-forms for forging. The advantage of this technology is to get high-performance near-formed parts at a low cost, compared traditional processing. Clarifying the hot workability and the microstructural evolution of as-deposited samples is the key to obtaining high performance parts. In present work, the plastic behaviors and dynamic recrystallization mechanisms of as-deposited nickel-based superalloy are studied. The compression curves are corrected by eliminating adiabatic heating and friction effect. And then the hot deformation activation energy and the constitutive equation of as-deposited sample are obtained. Compared to the wrought Inconel 625, as-deposited Inconel 625 has lower hot deformation activation energy (466.511 kJ/mol). The peak stress gradually decreases, while the recrystallized grain volume fraction gradually increases when deformation temperature increases and strain rate decreases. The characterization results of TEM and EBSD show that the discontinuous dynamic recrystallization mechanism nucleating by the bowing of grain boundaries occupies an absolute dominant position. In addition, combined with the microstructural evolution and hot processing map, the best hot working conditions of as-deposited Inconel 625 are obtained (deformation temperature: 1050–1150 ℃, strain rate: 0.001–0.01 s −1).
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Metallurgy and Material Forming · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Progress and perspectives in laser additive manufacturing of key aeroengine materials
2. Additive manufacturing of metallic components- Process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
3. Additive manufacturing (3D printing): a review of materials, methods, applications and challenges10.1016/j.compositesb.2018.02.012 ↗
4. Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones10.1016/j.actamat.2016.02.014 ↗
5. Development of strong, oxidation and corrosion resistant nickel-based superalloys: critical review of challenges, progress and prospects
6. Evolution of solidification microstructure and dynamic recrystallisation of Inconel 625 during laser solid forming process
7. Effect of solution temperature on static recrystallization and ductility of Inconel 625 superalloy fabricated by directed energy deposition
8. Laser aided direct metal deposition of Inconel 625 superalloy: Microstructural evolution and thermal stability10.1016/j.msea.2009.01.009 ↗
9. Laser metal deposition of Inconel 625: microstructure and mechanical properties10.2351/1.4757717 ↗
10. The influence of Laves phases on the high-cycle fatigue behavior of laser additive manufactured Inconel 71810.1016/j.msea.2017.03.098 ↗
11. Effect of solution heat treatment on the microstructure and mechanical properties of Inconel 625 superalloy fabricated by laser solid forming10.1016/j.jallcom.2018.07.087 ↗
12. Busch, D.M., et al. Methods for Producing Forged Products and Other Worked Products, 2015, PCT/US2014/045952.
13. Di, D.S.E., et al. Method for the Production of Parts Made from Metal or Metal Matrix Composite and Resulting from Additive Manufacturing Followed by an Operation Involving the Forging of Said Parts, 2015, PCT/FR2015/051087.
14. An integrated method for net-shape manufacturing components combining 3D additive manufacturing and compressive forming processes10.1016/j.proeng.2017.10.1050 ↗
15. Microstructural evolution of a Ti-6Al-4V alloy during thermomechanical processing10.1016/S0921-5093(01)01531-3 ↗
16. A study on hot-working as alternative post-processing method for titanium aluminides built by laser powder bed fusion and electron beam melting
17. Stress-strain behavior of a selective laser melted Ti-6Al-4V at strain rates of 0.001-1/s and temperatures 20-1000℃
18. Hot workability and microstructure evolution of pre-forms for forgings produced by additive manufacturing10.1016/j.jmatprotec.2018.02.017 ↗
19. Development of a processing route for Ti-6Al-4V forgings based on preforms made by selective laser melting10.1016/j.jmapro.2018.11.011 ↗
20. Sizova, I., et al. Wire-arc additive manufacturing of pre-forms for forging of a Ti-6Al-4V turbine blade, AIP Conf. Proc., 2113, 150017 (2019).10.1063/1.5112693 ↗
21. On the hot deformation behavior of Ti-6Al-4V made by additive manufacturing
22. Hot workability and microstructure evolution of the nickel-based superalloy Inconel 718 produced by laser metal deposition10.1016/j.jallcom.2018.01.029 ↗
23. Plastic deformation behavior and dynamic recrystallization of Inconel 625 superalloy fabricated by directed energy deposition10.1016/j.matdes.2019.108359 ↗
24. Effect of heat treatment on the microstructural evolution and mechanical properties of GH4099 additive-manufactured by directed energy deposition10.1016/j.jallcom.2019.05.348 ↗
25. Microstructure evolution of 316L stainless steel during laser rapid forming
26. Microstructural evolution and anisotropic mechanical properties of Inconel 625 superalloy fabricated by directed energy deposition10.1016/j.jallcom.2021.159426 ↗
27. A new method for evaluation of friction in bulk metal forming10.1016/j.jmatprotec.2004.03.029 ↗
28. Hot deformation behavior and processing workability of a Ni-based alloy10.1016/j.jallcom.2018.08.010 ↗
29. The prediction of hot flow behavior of Al–6%Mg alloy10.1016/j.mechrescom.2008.06.011 ↗
30. The adiabatic correction factor for deformation heating during the uniaxial compression test10.1361/105994901770344593 ↗
31. Deformation behavior and microstructural evolution of as-cast 904L austenitic stainless steel during hot compression10.1016/j.msea.2012.12.043 ↗
32. Evaluation of the deformation behaviors and hot workability of a high-strength low-alloy steel10.1016/j.msea.2021.141031 ↗
33. An analysis of the isothermal hot compression test10.1007/BF02675571 ↗
34. Optimization of the hot working parameters of a nickel-based superalloy using a constitutive-dynamic recrystallization model and three-dimensional processing map10.1007/s10853-021-06276-4 ↗
35. On the mechanism of hot deformation10.1016/0001-6160(66)90207-0 ↗
36. Hot deformation characteristics and microstructure evolution of Hastelloy C-276
37. Plastic deformation behavior of direction alloy solidified U720Li alloy at elevated temperature
38. Modeling of dynamic material behavior in hot deformation: forging of Ti-624210.1007/BF02664902 ↗
39. Characterization of hot deformation behavior of GH925 superalloy using constitutive equation, processing map and microstructure observation10.1016/j.jallcom.2015.08.118 ↗
40. Characterization of hot deformation behavior of alloy 617 through kinetic analysis, dynamic material modeling and microstructural studies10.1016/j.msea.2016.04.004 ↗
41. Processing maps for hot working of titanium alloys10.1016/S0921-5093(97)00782-X ↗
42. The microstructure evolution and nucleation mechanisms of dynamic recrystallization in hot-deformed Inconel 625 superalloy10.1016/j.matdes.2010.07.040 ↗
43. Nucleation mechanisms of dynamic recrystallization in Inconel 625 superalloy deformed with different strain rates10.1007/s12598-012-0494-7 ↗
44. Study of dynamic recrystallization in a Ni-based superalloy by experiments and cellular automaton model10.1016/j.msea.2014.12.092 ↗