Analysis on microstructure and mechanical properties of Ti-47.5Al-3Nb-1.5Cr alloy through heat-treatment
Source abstract
Abstract
In order to study the effect of microstructure on mechanical properties of heat -treated Ti-47.5Al-3Nb-1.5Cr (at%.) samples, a heat treatment system was designed at 1573 K, 1623 K and 1673 K for 15 min, 30 min and 60 min. After the heat preservation, the samples were air-cooled. Among them, when the as-cast samples are keep at 1623 K for a period of time, the interlamellar spacing is refined. In addition, due to the heat treatment in the two-phase region, the elements are further diffused and more uniform in the sample. The room temperature tensile tests exhibits that the mechanical properties of the samples obtained by holding at 1623 K for 1 h and then air-cooling obtained the best improvement, the tensile strength and elongation at break from 372.54 MPa and 0.70% to 533.86 MPa and 1.04%. After analyzing the mechanical properties and structure of the alloy, it can be concluded that refining the interlamellar spacing and solid solution strengthening can effectively improve the elongation and tensile strength.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Microscale investigation of perovskite-Ti3AlC strengthening and plastic deformation in high niobium containing TiAl alloys10.1016/j.jallcom.2020.157563 ↗
2. Influence of Nb on Ti diffusion in γ-TiAl intermetallics studied by mechanical spectroscopy10.1016/j.jallcom.2021.158880 ↗
3. Modeling concepts for intermetallic titanium aluminides10.1016/j.pmatsci.2016.01.001 ↗
4. The compression behaviour of niobium alloyed γ-titanium alumindies10.1016/S1359-6454(97)00332-7 ↗
5. High-temperature structural intermetallics10.1016/S1359-6454(99)00301-8 ↗
6. Dynamic recrystallization of a β(B2)-Stabilized γ-TiAl based Ti-45Al-8Nb-2Cr-0.2B alloy: The contributions of constituent phases and Zener-Hollomon parameter modulated recrystallization mechanisms10.1016/j.jallcom.2020.154386 ↗
7. Fabrication of TiAl alloys turbocharger turbine wheel for engines by metal injection molding10.1016/j.powtec.2021.01.070 ↗
8. Intermetallic titanium aluminides in aerospace applications-processing, microstructure and properties10.1080/09603409.2016.1163792 ↗
9. Tensile properties and fracture toughness of TiAl alloys with controlled microstructures10.1016/0966-9795(96)00047-7 ↗
10. Microstructural refinement and improvement of mechanical properties and oxidation resistance in EPM TiAl-based intermetallics with yttrium addition10.1016/S1359-6454(02)00006-X ↗
11. Microstructure and mechanical properties of vacuum diffusion bonding joints for γ-TiAl based alloy10.1016/j.vacuum.2018.01.035 ↗
12. Carbon distribution in multi-phase γ-TiAl based alloys and its influence on mechanical properties and phase formation10.1016/j.actamat.2015.04.055 ↗
13. Fabrication of γ-TiAl intermetallic alloy using the twin-wire plasma arc additive manufacturing process: Microstructure evolution and mechanical properties10.1016/j.msea.2021.141056 ↗
14. Microstructure refinement of cast TiAl alloys by β solidification10.1016/j.scriptamat.2004.03.044 ↗
15. Alloy design concepts for refined gamma titanium aluminide based alloys10.1016/j.intermet.2006.05.003 ↗
16. Grain refinement by trace TiB2 addition in conventional cast TiAl-based alloy10.1016/j.matchar.2015.05.020 ↗
17. Microstructure and properties of a beta-solidifying TiAl-based alloy with different refiners10.1007/s12598-015-0634-y ↗
18. Refinement of massive γ phase with enhanced properties in a Ta containing γ-TiAl-based alloys10.1016/j.scriptamat.2019.06.035 ↗
19. Phase transformation and microstructure evolution of differently processed Ti-45Al-9Nb-Y alloy10.1016/j.intermet.2012.07.009 ↗
20. Effects of Cr alloying on the evolution of solidification microstructure and phase transformations of high-Nb containing γ-TiAl based alloys10.1016/j.intermet.2021.107117 ↗
21. Effect of multi-stage heat treatment on mechanical properties and microstructure transformation of Ti-48Al-2Cr-2Nb alloy10.1016/j.msea.2021.141321 ↗
22. Enhancing the creep resistance of electron beam melted gamma Ti-48Al-2Cr-2Nb alloy by using two-step heat treatment10.1016/j.intermet.2020.106771 ↗
23. The effects of Cr additions to binary TiAl-base alloys10.1007/BF02851355 ↗
24. Tuning mechanical properties for β(B2)-containing TiAl intermetallics10.1016/S1003-6326(11)61505-7 ↗
25. Solidification microstructure characteristics of Ti-44Al-4Nb-Cr-0.1B alloy under various cooling rates during mushy zone10.1007/s12598-015-0633-z ↗
26. Solidification characteristics of high Nb-containing γ-TiAl-based alloys with different aluminum contents10.1007/s12598-014-0416-y ↗
27. Widmannstätten laths in Ti48Al2Cr2Nb alloy by undercooled solidification10.1016/j.matchar.2015.07.006 ↗
28. Microstructures, micro-segregation and solidification path of directionally solidified Ti-45Al-5Nb alloy10.1007/s41230-016-6004-z ↗
29. Tailoring microstructure and chemical composition of advanced γ-TiAl based alloys for improved creep resistance10.1016/j.intermet.2018.03.011 ↗
30. Phase transformation and microstructure evolution of a beta-solidified gamma-TiAl alloy10.1016/j.jallcom.2020.158082 ↗
31. Effects of the addition of transition metals on phase equilibria and phase transformations in TiAl systems in between 1473 and 1073K10.1016/j.jallcom.2021.160392 ↗
32. Intermetallics: Why is it so difficult to introduce them in gas turbine engines?10.1016/j.intermet.2006.01.064 ↗
33. Phase transformation and microstructural control of the α-solidifying γ-Ti-45Al-2Nb-0.7Cr-0.3Si intermetallic alloy10.1016/j.jallcom.2018.05.051 ↗
34. Growth velocity and microhardness dependences of intermetallic compound phases on solubility range during peritectic solidification10.1016/j.jallcom.2021.158932 ↗
35. Phase transition and nano-mechanical properties of directionally solidified Sn-Co peritectic alloy10.1016/j.jmrt.2020.12.077 ↗
36. Phase selection and nano-mechanical properties of intermetallic compounds in directionally solidified Cu-68at%Sn peritectic alloy10.1016/j.jallcom.2020.157866 ↗
37. Hot tensile behavior of a TiAl alloy with a (β0+γ) microduplex microstructure prepared simply by heat treatments10.1016/j.jallcom.2021.160039 ↗
38. Hall-Petch relationship in two-phase TiAl alloys with fully lamellar microstructures10.1016/S0025-5408(02)00767-5 ↗