Ignition study of facile spray drying prepared microspheres of nickel coated boron nanoparticles using a shock tube
Source abstract
Abstract
Boron is being widely explored as a potential additive for high energy fuels because of its extraordinary gravimetric and volumetric energy content. However, its application is obstructed by the surface oxide layer which forms on the core boron particles, degrading its combustion and ignition performance. This oxide layer has a high vaporization temperature. To improve the combustion and ignition performance of boron, nickel nanoparticles were coated on the boron particle surface using a simple and unique spray drying technique. Numerous samples were prepared while varying the boron and nickel particles weight percent ratios. Surface morphological analyses showed that the nickel coated boron particles formed microspheres. These microspheres had a size distribution in the range of 2–15 µm and a mean diameter of 4.64 µm. The coating density of the crystalline nickel nanoparticles on the boron surface increased as the nickel percent used for the sample preparation was increased. X-ray diffraction (XRD) identifies the coating of nickel particles over the boron surface without any phase formation. Field emission scanning electron microscopy (FE-SEM), line scanning, elemental mapping and energy dispersive spectroscopy (EDS) studies provided an elemental analysis of the nickel coated boron particles that confirmed the surfaces of the boron particles were coated with nickel particles, and formed intimate contact between them. The oxidation performance of nickel, boron, and boron coated with nickel particles was studied by thermogravimetric analysis (TGA). The beginning of oxidation and the exothermic peaks of pure boron appeared earlier after the coating with nickel. Also, a decrease in weight gain was observed at 1000 °C in the boron coated with nickel. A shock tube experiment showed the nickel coated boron has a lower ignition delay time than the pure boron. The ignition delay times of the nickel coated boron samples, such as B:Ni= 40:1 and B:Ni= 10:1 samples decreased by 12% and 16%, respectively, compared to pure boron. Thus, spray drying prepared nickel coated boron particles demonstrated a substantial improvement in ignition performance versus uncoated boron.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Energetic Materials and Combustion · Combustion and Detonation Processes · Rocket and propulsion systems research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Synthesis and exothermic reactions of ultra-fine snowman-shaped particles with directly bonded Ni/Al interfaces10.1016/j.apsusc.2019.01.068 ↗
2. Preparation of ultrathin TiO2 coating on boron particles by thermal chemical vapor deposition and their oxidation-resistance performance10.1016/j.jallcom.2018.07.152 ↗
3. Ignition of boron particles coated by a thin titanium film10.2514/3.23950 ↗
4. Effect of purity, surface modification and iron coating on ignition and combustion of boron in air
5. Ignition and combustion of boron particles10.1016/S0360-1285(96)00012-3 ↗
6. Effect of magnesium on the burning characteristics of boron particles10.1016/j.actaastro.2013.11.039 ↗
7. Hartwell F. Calcote, Robert J. Gill, Charles Berman, William Felder, Production and coating of pure boron powders, 1990, p. 59.
8. Ignition and combustion characteristics of amorphous boron and coated boron particles in oxygen jet10.1016/j.combustflame.2017.07.030 ↗
9. Combustion of nano aluminum particles10.1134/S0010508215020045 ↗
10. Combustion of activated aluminum10.1016/j.combustflame.2006.01.003 ↗
11. Ignition and combustion of Mg-coated and uncoated boron particles
12. Effect of boron particle surface coating on combustion of solid propellants for ducted rockets10.1002/prep.19910160403 ↗
13. Combustion characteristics of GAP-coated boron particles and the fuel-rich solid propellant10.1016/0010-2180(94)00032-N ↗
14. Combustion of boron particles coated with an energetic polymer material10.1007/s11814-016-0173-8 ↗
15. Shock initiation of crystalline boron in oxygen and fluorine compounds10.2514/3.24088 ↗
16. Boron suboxides measured during ignition and combustion of boron in shocked Ar/F/O2 and Ar/N2/O2 mixtures10.1016/S0010-2180(99)00082-6 ↗
17. Effects of rare-earth oxide catalysts on the ignition and combustion characteristics of boron nanoparticles10.1016/j.combustflame.2013.06.030 ↗
18. Effect of metal hydrides on the burning characteristics of boron10.1016/j.tca.2014.10.017 ↗
19. Effect of solid oxidizers on the thermal oxidation and combustion performance of amorphous boron10.1007/s10973-016-5252-x ↗
20. Combustion of boron-titanium nanocomposite powders in different environments10.2514/1.30483 ↗
21. Effect of boron content in B·BiF3 and B·Bi composites on their ignition and combustion10.1016/j.combustflame.2020.01.026 ↗
22. Transition metal catalysts for boron combustion
23. Zirconium-boron reactive composite powders prepared by arrested reactive milling10.1080/07370652.2019.1679279 ↗
24. Ignition and combustion enhancement of boron with polytetrafluoroethylene10.2514/1.B35390 ↗
25. Boron ignition and combustion with doped δ-Bi2O3: bond energy/oxygen vacancy relationships10.1016/j.combustflame.2018.07.015 ↗
26. Thermo-physical characteristics of nickel-coated aluminum powder as a function of particle size and oxidant10.3901/CJME.2016.0811.092 ↗
27. Study on the ignition mechanism of Ni-coated aluminum particles in air10.1016/j.combustflame.2018.07.010 ↗
28. Stability and ignition of a siloxane-coated magnesium powder10.1002/prep.201900272 ↗
29. Synthesis and improved explosion behaviors of aluminum powders coated with nano-sized nickel film10.1016/j.apsusc.2016.11.056 ↗
30. Spray drying formation of metal oxide (TiO2 or SnO2) nanoparticle coated boron particles in the form of microspheres and their physicochemical properties10.1016/j.jallcom.2019.151923 ↗
31. Preparation of microencapsulated powders by an aerosol spray method and their optical properties10.1163/15685520360685983 ↗
32. Self-organization kinetics of mesoporous nanostructured particles10.1002/aic.10257 ↗
33. Preparation of TiO2-decorated boron particles by wet ball milling and their photoelectrochemical hydrogen and oxygen evolution reactions10.3390/ma9121012 ↗
34. Synergic CO oxidation activities of boron–CeO2 hybrid materials prepared by dry and wet milling methods10.1016/j.ceramint.2014.03.044 ↗
35. ZnO-TiO2 core-brush nanostructure: processing, microstructure and enhanced photocatalytic activity10.1039/c2jm15477c ↗
36. Use of oxygen/nickel ratios in the XPS characterisation of oxide phases on nickel metal and nickel alloy surfaces10.1016/j.elspec.2012.06.008 ↗
37. XPS study of silver, nickel and bimetallic silver–nickel nanoparticles prepared by seed-mediated growth10.1016/j.apsusc.2012.05.095 ↗
38. Room temperature electroless Ni-coating on boron particles: physicochemical and oxidation-resistance properties10.1016/j.jiec.2020.08.007 ↗
39. NiO nanorings and their unexpected catalytic property for CO oxidation10.1088/0957-4484/17/4/023 ↗
40. Boron nanoparticles for room‐temperature hydrogen generation from water10.1002/aenm.201502550 ↗
41. Oxidation behaviour of boron carbide powder10.1016/j.msea.2006.08.068 ↗
42. Oxidation of boron carbide particles at low temperatures10.1016/j.matlet.2014.04.138 ↗
43. Preparation and properties of boron-based nano‐B/NiO thermite10.1002/prep.201400308 ↗
44. Preparation and properties of boron-based nano-B/CuO thermite10.18502/kms.v1i1.569 ↗
45. Ignition performance of TiO2 coated boron particles using a shock tube10.1016/j.ceramint.2021.11.156 ↗
46. Metal oxides as catalysts for boron oxidation10.2514/1.B35037 ↗
47. Ignition of nickel coated aluminum agglomerates using shock tube10.1016/j.combustflame.2020.07.021 ↗
48. Ignition dynamics of boron particles in a shock tube10.2514/2.5282 ↗
49. Oxidizer and pressure effects on the combustion of 10-μm aluminum particles10.2514/1.12732 ↗
50. Ignition and oxidation performance of SnO2 coated boron particles: a solid fuel for energetic applications10.1016/j.jallcom.2021.161123 ↗
51. S. Gordon, B.J. McBride, Computer program for calculation of complex equilibrium compositions, rocket performance, incident and reflected shocks, and Chapman-Jouguet detonations, NASA SP-273 168 (1971).
52. Burn time measurements of single aluminum particles in steam and CO2 mixtures10.2514/3.24087 ↗
53. Metal oxides as catalysts for the oxidation of graphite10.1016/0008-6223(70)90055-2 ↗