Evaluation of high-frequency induction heat sintering and conventional sintering in AlxCoCrFeMnNi high-entropy alloys
Source abstract
Abstract
AlxCoCrFeMnNi high-entropy alloys with different aluminum concentrations (x = 0.5, 1, and 1.5 at%) were synthesized by mechanical alloying followed by consolidation using two different sintering methods, conventional (CS) and high-frequency induction heat + conventional (HFIHS + CS). The results show the presence of FCC, BCC, and B2ordered phases in all systems, regardless of the sintering method. The BCC phase exhibits morphological changes (cuboidal-type and plate-like) associated with the two sintering methods involving different diffusion rates and affecting the hardness values. The M23C6 carbide is identified in systems sintered by the CS method; meanwhile, the M7C3 carbide is identified in the HFIHS + CS method. Finally, the HFIHS + CS method results in a higher level of densification (~95%) than the CS method (~80%).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Local composition migration induced microstructural evolution and mechanical properties of non-equiatomic Fe40Cr25Ni15Al15Co5 medium-entropy alloy10.1007/s11661-021-06188-7 ↗
2. High-entropy alloys: a critical assessment of their founding principles and future prospects10.1080/09506608.2016.1180020 ↗
3. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
4. Alloy design strategies and future trends in high-entropy alloys10.1007/s11837-013-0761-6 ↗
5. Effect of valence electron concentration on stability of FCC or BCC phase in high entropy alloys
6. Phase stability in high entropy alloys: formation of solid-solution phase or amorphous phase10.1016/S1002-0071(12)60080-X ↗
7. Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys10.1016/j.actamat.2013.01.042 ↗
8. High-entropy alloys and metallic nanocomposites: Processing challenges, microstructure development and property enhancement10.1016/j.mser.2018.04.003 ↗
9. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
10. A review on fundamental of high entropy alloys with promising high–temperature properties10.1016/j.jallcom.2018.05.067 ↗
11. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
12. Microstructure and mechanical properties of FeCoCrNiMnAlx high-entropy alloys prepared by mechanical alloying and hot-pressed sintering10.1016/j.jallcom.2018.10.168 ↗
13. Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system10.1016/j.actamat.2013.09.037 ↗
14. Mechano-chemical synthesis, thermal stability and phase evolution in AlCoCrFeNiMn high entropy alloy10.1016/j.jallcom.2018.05.057 ↗
15. Microstructures and mechanical properties of mechanically alloyed and spark plasma sintered Al0.3CoCrFeMnNi high entropy alloy10.1016/j.matchemphys.2017.09.013 ↗
16. Controlled formation of coherent cuboidal nanoprecipitates in body-centered cubic high-entropy alloys based on Al2(Ni,Co,Fe,Cr)14 compositions10.1016/j.actamat.2018.01.050 ↗
17. Formation of cuboidal B2 nanoprecipitates and microstructural evolution in the body-centered-cubic Al0.7NiCoFe1.5Cr1.5 high-entropy alloy10.1016/j.jallcom.2018.11.381 ↗
18. The BCC/B2 morphologies in AlxNiCoFeCr high-entropy alloys10.3390/met7020057 ↗
19. Novel Fe36Mn21Cr18Ni15Al10 high entropy alloy with bcc/B2 dual-phase structure10.1016/j.jallcom.2017.02.211 ↗
20. Heat treatment impacts the micro-structure and mechanical properties of AlCoCrFeNi high entropy alloy10.1016/j.jallcom.2016.05.034 ↗
21. Alloying behaviour, thermal stability and phase evolution in quinary AlCoCrFeNi high entropy alloy10.1016/j.apt.2018.06.006 ↗
22. Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys10.1016/j.intermet.2012.03.005 ↗
23. Evolution of microstructure, hardness, and corrosion properties of high-entropy Al0.5CoCrFeNi alloy10.1016/j.intermet.2010.10.008 ↗
24. Effect of hot isostatic pressing on the microstructure and mechanical properties of additive manufactured AlxCoCrFeNi high entropy alloys10.1016/j.msea.2018.07.036 ↗
25. Alloying behavior and novel properties of CoCrFeNiMn high entropy alloy fabricated by mechanical alloying and spark plasma sintering10.1016/j.intermet.2014.08.008 ↗
26. Effect of sintering on phase evolution in AlMgFeCuCrNi4.75 high entropy alloy10.1016/j.apt.2016.01.001 ↗
27. Phase evolution and densification behavior of nanocrystalline multicomponent high entropy alloys during spark plasma sintering10.1007/s11837-013-0759-0 ↗
28. Sintering mechanism of CoCrFeMnNi high-entropy alloy powders10.1080/00325899.2018.1433268 ↗
29. Rapid consolidation and mechanical properties of binderless nanostructured (W,Ti)C by high-frequency induction heating10.2320/matertrans.M2013273 ↗
30. Rapid sintering process and mechanical properties of binder less ultra fine tungsten carbide10.1016/j.msea.2006.07.127 ↗
31. Rapid sintering of ultra fine WC and WC-Co hard materials by high-frequency induction heated sintering and their mechanical properties10.1007/BF03027821 ↗
32. Effect of high-frequency induction heat sintering conditions on the microstructure and mechanical properties of nanostructured magnesium/hydroxyapatite nanocomposites10.1016/j.matdes.2011.11.008 ↗
33. Increase of the mechanical response of pure aluminum by grain refinement retained with an alternative rapid sintering route10.1557/s43578-021-00176-8 ↗
34. Advancement in the pressureless sintering of CP titanium using high-frequency induction heating10.1007/s11661-019-05381-z ↗
35. Recent advances in magnetic structure determination by neutron powder diffraction10.1016/0921-4526(93)90108-I ↗
36. Mechanical alloying and spark plasma sintering of CoCrFeNiMnAl high-entropy alloy10.1016/j.apt.2014.03.014 ↗
37. The origins of high-entropy alloy contamination induced by mechanical alloying and sintering10.3390/met10091186 ↗
38. Processing, microstructure and properties of Ni1.5CoCuFeCr0.5−xVx high entropy alloys with carbon introduced from process control agent10.1016/j.jallcom.2016.10.288 ↗
39. Influence of process control agent and Al concentration on synthesis and phase stability of a mechanically alloyed AlxCoCrFeMnNi high-entropy alloy10.1016/j.jallcom.2021.160770 ↗
40. The effect of temperature on the evolution of eutectic carbides and M7C3 → M23C6 carbides reaction in the rapidly solidified Fe-Cr-C alloy10.1016/j.jallcom.2016.12.252 ↗
41. Microstructure and mechanical properties of biocompatible high density Ti–6Al–4V/W produced by high frequency induction heating sintering10.1016/j.matdes.2010.03.042 ↗
42. High-frequency induction heat sintering of mechanically alloyed alumina-yttria-stabilized zirconia nano-bioceramics10.1111/j.1551-2916.2005.00902.x ↗
43. Effects of annealing treatment on phase composition and microstructure of CoCrFeNiTiAlx high-entropy alloys10.1016/j.intermet.2011.10.010 ↗
44. Phase separation in equiatomic AlCoCrFeNi high-entropy alloy10.1016/j.ultramic.2012.12.015 ↗
45. Decomposition in multicomponent AlCoCrCuFeNi high-entropy alloy10.1016/j.actamat.2010.09.023 ↗
46. Retardation of the σ phase formation in the AlCoCrFeNi multi-component alloy10.1016/j.matchar.2018.12.010 ↗
47. Effect of heating rate on microstructure and mechanical properties of AlCoCrFeNi high entropy alloy produced by spark plasma sintering10.1016/j.matchar.2019.05.022 ↗
48. Sinter ageing of equiatomic Al20Co20Cu20Zn20Ni20 high entropy alloy via mechanical alloying10.1016/j.msea.2014.08.046 ↗
49. Phase inversion in a two-phase, BCC+B2, refractory high entropy alloy10.1016/j.actamat.2019.12.004 ↗
50. Tensile ductility of an AlCoCrFeNi multi-phase high-entropy alloy through hot isostatic pressing (HIP) and homogenization10.1016/j.msea.2015.08.078 ↗
51. The strengthening effects of relatively lightweight AlCoCrFeNi high entropy alloy10.1016/j.matchar.2019.03.006 ↗
52. The microstructure and mechanical properties of novel Al-Cr-Fe-Mn-Ni high-entropy alloys with trimodal distributions of coherent B2 precipitates10.1016/j.msea.2019.04.104 ↗
53. Review progress in ostwald ripening theories and their applications to nickel-base superalloys part i: ostwald ripening theories10.1023/A:1015388912729 ↗
54. The mechanism of morphogenesis in a phase-separating concentrated multicomponent alloy10.1038/nmat1845 ↗
55. Coarsening and dissolution of γ′ precipitates during solution treatment of AD730TM Ni-based superalloy: Mechanisms and kinetics models10.1016/j.jallcom.2015.11.002 ↗
56. Aging of γ′ precipitates at 750 °C in the nickel-based superalloy AD730TM: a thermally or thermo-mechanically controlled process metals
57. The influence of induction sintering on microstructure and deformation behavior of Ti-5Al-5Mo-5V–3Cr alloy10.1007/s11661-021-06179-8 ↗
58. Phase equilibria of an Al0.5CrFeCoNiCu high entropy alloy10.1016/j.msea.2014.07.059 ↗