Research on microstructure and mechanical properties of FeCoNi1.5CuB0.5Y0.2 high entropy alloy treated by cryogenic treatment
Source abstract
Abstract
In this paper, the microstructure, micro zone performance and compressive properties of FeCoNi 1.5CuB 0.5Y 0.2 high-entropy alloys under different cryogenic treatment parameters (cryogenic temperature T, holding time t and cooling rate V) are studied. The results show that there are significant lattice distortions and changes in the morphology and size of each phase under different cryogenic conditions. In the optimized sample with cryogenic treatment conditions of T = −196 ℃, t = 36 h and V= 5 ℃/min, the number of HCP phase and M 3 B phase increases significantly, the size is significantly reduced and a large number of nanoparticles appear. In terms of the mechanical properties of the micro zone, the nano-hardness and elastic modulus of each phase have been significantly improved compared with the untreated sample. For the optimized sample, the nano-hardness, compressive strength and fracture toughness also reach the maximum, which are 34.4%, 44.6% and 145% higher than that of the untreated sample respectively. It is analyzed that the cryogenic treatment of HEA results in dislocation strengthening, fine-grain strengthening, nano-heterogeneous particle strengthening, which promote the simultaneous improvement of the overall strength-ductility of the HEA.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Low-temperature embrittlement and fracture of metals with different crystal lattices-Dislocation mechanisms10.1016/j.nme.2016.02.002 ↗
2. Achieving high ductility in the 1.7 GPa grade CoCrFeMnNi high-entropy alloy at 77 K10.1016/j.msea.2018.10.094 ↗
3. Twinning engineering of a CoCrFeMnNi high-entropy alloy
4. Cryogenic mechanical behaviors of CrMnFeCoNi high-entropy alloy10.1016/j.msea.2020.139579 ↗
5. Cryogenic-deformation-induced phase transformation in an FeCoCrNi high-entropy alloy10.1080/21663831.2018.1434250 ↗
6. Real-time nanoscale observation of deformation mechanisms in CrCoNi-based medium to high-entropy alloys at cryogenic temperatures10.1016/j.mattod.2019.03.001 ↗
7. Mechanical properties of the CoCrFeNiMnVx high entropy alloys in temperature range 4.2–300 K10.1016/j.jallcom.2016.12.154 ↗
8. Joint contribution of transformation and twinning to the high strength-ductility combination of a FeMnCoCr high entropy alloy at cryogenic temperatures10.1016/j.msea.2019.05.057 ↗
9. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
10. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
11. On the strain rate-dependent deformation mechanism of CoCrFeMnNi high-entropy alloy at liquid nitrogen temperature10.1080/21663831.2017.1323807 ↗
12. Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy10.1016/j.actamat.2016.07.038 ↗
13. Tensile properties of high- and medium-entropy alloys10.1016/j.intermet.2013.03.018 ↗
14. Effects of boron on microstructure and properties of microwave sintered FeCoNi1.5CuY0.2 high-entropy alloy
15. Microwave vacuum sintering of FeCoNi1.5CuB0.5Y0.2 high-entropy alloy: effect of heat treatment on microstructure and mechanical property10.1016/j.vacuum.2020.109738 ↗
16. The influence of cryogenic-aging circular treatment on the microstructure and properties of aluminum matrix composites10.1016/j.jallcom.2016.11.028 ↗
17. Probing deformation mechanisms of a FeCoCrNi high-entropy alloy at 293 and 77 K using in situ neutron diffraction10.1016/j.actamat.2018.05.013 ↗
18. Thermodynamic analysis of high entropy alloys and their mechanical behavior in high and low-temperature conditions with a microstructural approach10.1016/j.intermet.2020.106850 ↗
19. Cryogenic treatment of metal – a review10.1016/j.matpr.2018.10.324 ↗
20. Tailoring heterogeneities in high-entropy alloys to promote strength–ductility synergy10.1038/s41467-019-13311-1 ↗
21. Effects of temperature and strain rate on plastic deformation mechanisms of nanocrystalline high-entropy alloys
22. Cocktail effects in understanding the stability and properties of face-centered-cubic high-entropy alloys at ambient and cryogenic temperature10.1016/j.scriptamat.2020.06.008 ↗
23. Role of stacking fault energy in strengthening due to cryo-deformation of FCC metals10.1016/j.msea.2010.08.015 ↗
24. Effects of temperature on mechanical properties and deformation mechanisms of the equiatomic CrFeNi medium-entropy alloy10.1016/j.actamat.2020.11.012 ↗
25. An improved technique for determining hardness and modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
26. Tensile properties and microstructures of a 2024-T351 aluminum alloy subjected to cryogenic treatment
27. Analysis of the effect of Deep Cryogenic Treatment on the hardness and microstructure of X30 CrMoN 15 1 steel10.1016/j.matdes.2011.07.030 ↗
28. Fatigue behaviour and fracture mechanism of cryogenically treated En 353 steel10.1016/j.matdes.2009.01.003 ↗
29. The effect of deep cryogenic treatments on the mechanical properties of an AISI H13 steel10.1016/j.msea.2014.11.051 ↗
30. Effect of cryogenic treatment and aging treatment on the tensile properties and microstructure of Ti-6Al-4V alloy10.1016/j.msea.2013.07.021 ↗
31. Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes10.1038/s41586-018-0685-y ↗
32. Tuning element distribution, structure and properties by composition in high-entropy alloys10.1038/s41586-019-1617-1 ↗
33. Dislocation mechanisms and 3D twin architectures generate exceptional strength-ductility-toughness combination in CrCoNi medium-entropy alloy10.1038/ncomms14390 ↗
34. Temperature dependent stacking fault energy of FeCrCoNiMn high entropy alloy10.1016/j.scriptamat.2015.05.041 ↗
35. Theory of screw dislocation strengthening in random BCC alloys from dilute to “High-Entropy” alloys10.1016/j.actamat.2019.10.007 ↗