Microstructures and mechanical properties of Zr-based metallic glass ablated by nanosecond pulsed laser in various gas atmospheres
Source abstract
Abstract
The surface with micro-convex prepared by laser ablation is beneficial to improving the functional properties of metallic glasses (MGs). However, accompanied by the formation of micro-convex, surface hardness of the ablated area generally decreases due to the softening effect caused by laser thermal shock . Previous studies have shown that the mechanical properties of laser-ablated MG surface are significantly different when using different gas atmospheres. In this study, a comparative investigation was performed to analyze the influence of gas atmosphere (i.e. argon, nitrogen, and air) on the formation of micro-convex as well as its surface characteristics and mechanical properties. Experimental results showed that the atmosphere type did not affect the formation of micro-convex, but significantly affected the surface morphology and element composition of the laser-ablated area. The element analysis and Raman spectral measurements indicated that laser ablation in nitrogen or air atmosphere resulted in local nitridation or oxidation. The results of nanoindentation tests demonstrated that laser ablation in nitrogen or air atmosphere also resulted in surface hardness inhomogeneity, i.e., softening and hardening effects coexist in the ablated area, which could be attributed to the combined influence of laser thermal shock, the introduction of secondary phase as well as laser ablation induced loose structure.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Laser Material Processing Techniques · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Bulk metallic glasses with functional physical properties10.1002/adma.200901053 ↗
2. New bulk metallic glasses for applications as magnetic-sensing, chemical, and structural materials10.1557/mrs2007.128 ↗
3. A single shear band in a metallic glass: local core and wide soft zone10.1063/1.4900791 ↗
4. Grinding performance and wear of metal bond super-abrasive tools in grinding of Zr-based bulk metallic glass10.1016/j.ijrmhm.2021.105501 ↗
5. X-ray diffraction study of atomic structure of Hf–W amorphous alloys10.1016/j.ijrmhm.2014.08.014 ↗
6. Vibration-accelerated activation of flow units in a Pd-based bulk metallic glass10.1016/j.msea.2017.03.062 ↗
7. Selective laser melting manufactured porous Fe-based metallic glass matrix composite with remarkable catalytic activity and reusability
8. A review of catalytic performance of metallic glasses in wastewater treatment: Recent progress and prospects10.1016/j.pmatsci.2019.100576 ↗
9. Recent development and application products of bulk glassy alloys10.1016/j.actamat.2010.11.027 ↗
10. The case for bulk metallic glass10.1016/S1369-7021(04)00124-5 ↗
11. Propagation dynamics of individual shear bands during inhomogeneous flow in a Zr-based bulk metallic glass10.1016/j.actamat.2011.01.060 ↗
12. 3D printing of Fe-based bulk metallic glass composites with combined high strength and fracture toughness10.1016/j.matdes.2018.01.061 ↗
13. Laser induced micro-cracking of Zr-based metallic glass using 1011 W/m2 nano-pulses
14. Abnormal softening of Ti-metallic glasses during nanosecond laser shock peening10.1016/j.msea.2019.138844 ↗
15. Laser shock peening on Zr-based bulk metallic glass and its effect on plasticity: Experiment and modeling10.1038/srep10789 ↗
16. Effect of laser shock peening on the compressive deformation and plastic behavior of Zr-based bulk metallic glass10.1016/j.optlaseng.2016.05.014 ↗
17. Fabrication and characterization of Fe-based metallic glasses by selective laser melting10.1016/j.optlastec.2018.07.059 ↗
18. Additive manufacturing of an iron-based bulk metallic glass larger than the critical casting thickness10.1016/j.apmt.2018.02.011 ↗
19. 3D printing of large, complex metallic glass structures10.1016/j.matdes.2016.12.087 ↗
20. Mechanical properties of Zr-based bulk metallic glass parts fabricated by laser-foil-printing additive manufacturing10.1016/j.msea.2018.11.056 ↗
21. Connecting structural defects to tensile failure in a 3D-printed fully-amorphous bulk metallic glass10.1016/j.msea.2021.141106 ↗
22. Surface patterning of Zr-based metallic glass by laser irradiation induced selective thermoplastic extrusion in nitrogen gas10.1088/1361-6439/aa71d5 ↗
23. Investigations in the fabrication of surface patterns for wettability modification on a Zr-based bulk metallic glass by nanosecond laser surface texturing10.1016/j.jmatprotec.2020.116714 ↗
24. Superhydrophobic Zr-based metallic glass surface with high adhesive force10.1063/1.4812480 ↗
25. In vitro cytocompatibility of a Zr-based metallic glass modified by laser surface texturing for potential implant applications10.1016/j.apsusc.2021.149194 ↗
26. Nanosecond laser processing of Zr41.2Ti13.8Cu12.5Ni10Be22.5 with single pulses10.1016/j.jmatprotec.2016.01.023 ↗
27. Nanosecond pulsed laser irradiation induced hierarchical micro/nanostructures on Zr-based metallic glass substrate10.1016/j.matdes.2016.07.056 ↗
28. Surface rippling on bulk metallic glass under nanosecond pulse laser ablation10.1063/1.3656700 ↗
29. Laser-induced regular nanostructure chains within microgrooves of Fe-based metallic glass10.1016/j.apsusc.2020.147156 ↗
30. Fabrication of homogenous subwavelength grating structures on metallic glass using double-pulsed femtosecond lasers10.1016/j.optlaseng.2020.106273 ↗
31. Design and perspective of amorphous metal nanoparticles from laser synthesis and processing10.1039/D1CP00701G ↗
32. A laser-based synthesis route for magnetic metallic glass nanoparticles10.1016/j.scriptamat.2021.114094 ↗
33. Nanosecond pulsed laser-induced formation of nanopattern on Fe-based metallic glass surface10.1016/j.apsusc.2021.151976 ↗
34. On the transformation between micro-concave and micro-convex in nanosecond laser ablation of a Zr-based metallic glass10.1016/j.jmapro.2021.06.034 ↗
35. Surface texturing by pulsed Nd:YAG laser10.1016/j.triboint.2009.06.003 ↗
36. Geometrical features and wettability of dung beetles and potential biomimetic engineering applications in tillage implements10.1016/j.still.2003.12.012 ↗
37. The coupling effects of laser thermal shock and surface nitridation on mechanical properties of Zr-based metallic glass10.1016/j.jallcom.2018.08.195 ↗
38. Softening of Zr-based metallic glass induced by nanosecond pulsed laser irradiation10.1016/j.jallcom.2018.04.278 ↗
39. Influence of process gas during powder bed fusion with laser beam of Zr-based bulk metallic glasses10.1016/j.procir.2020.09.039 ↗
40. Smart laser‐writable micropatterns with multiscale photo/moisture reconstructible structure
41. Saffman–Taylor fingering in nanosecond pulse laser ablating bulk metallic glass in water10.1016/j.intermet.2012.07.014 ↗
42. Zirconium nitride (ZrN) fibers prepared by carbothermal reduction and nitridation of electrospun PVP/zirconium oxychloride composite fibers10.1016/j.cej.2008.04.037 ↗
43. Shield gas induced cracks during nanosecond-pulsed laser irradiation of Zr-based metallic glass10.1007/s00339-016-0419-7 ↗
44. Investigation of ZrOx/ZrC–ZrN/Zr thin-film structural evolution and their degradation using X-ray diffraction and Raman spectrometry10.1007/s00339-016-0523-8 ↗
45. Selective oxidation/crystallization and their patterning on metallic glass by laser irradiation10.1016/j.jallcom.2017.08.202 ↗
46. Devitrification of thin film Cu–Zr metallic glass via ultrashort pulsed laser annealing10.1016/j.jallcom.2021.161437 ↗
47. Oxidation of Zr55Cu30Al10Ni5 bulk metallic glass in the glassy state and the supercooled liquid state10.1007/s00339-003-2470-4 ↗
48. Structural and mechanical modifications induced on Zr-based bulk metallic glass by laser shock peening10.1016/j.optlastec.2016.07.003 ↗
49. Effect of laser shock peening without absorbent coating on the mechanical properties of Zr-based bulk metallic glass10.1016/j.optlastec.2015.06.029 ↗
50. Energy storage in metallic glasses via flash annealing10.1002/adfm.201805385 ↗
51. Evolution of microstructure in Zr55Cu30Al10Ni5 bulk amorphous alloy by high power pulsed Nd:YAG laser10.1016/j.jallcom.2009.06.008 ↗