journal article·2022-04

Effect of single and hybrid hollow sphere reinforcement on the deformation mechanism of aluminum matrix syntactic foam at a low strain rate

Kartheek S.M. Sonti, S. Vincent, Suresh Kumar Reddy Narala

Publisher page

Abstract

The combination of soft matrix alloys and brittle spheres has gained unceasing demand due to its structural strength and tailored properties to meet industrial and commercial needs. Single sphere aluminum matrix syntactic foams (AMSFs) show poor ductility and fracture strength at high volume fractions of reinforcement. In the present investigation, three different volume fractions of the single sphere (alumina hollow spheres and cenospheres), syntactic foams (SF) and hybrid SF were prepared using a powder metallurgy route with a maximum reinforcement fraction of 30%. The lowest density of 2.17 g cm -3 was produced with no chemical reaction observed between matrix and reinforcement. The quasi-static compression studies have shown a significant effect of particle size and volume fraction with respective mechanical properties (peak stress = 601 MPa (Sample #1), 610 MPa (Sample #4) and 525 MPa (Sample #10)). The densification strain, energy absorption, energy absorption efficiency (EAE) and ideal EAE have been predicated for all the samples. The macroscopic deformation of SFs is in good agreement with stress-strain data. The results show that the slope of the plateau region follows a negative linear trend against the strain hardening exponent.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Aluminum Alloys Composites Properties · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Advanced new lightweight materials: hollow-sphere composites (HSCs) for mechanical engineering applications10.1002/adem.200320137 ↗
2. Compressive properties and energy absorption of aluminum foams with a wide range of relative densities10.1007/s11665-018-3514-4 ↗
3. A novel hollow alumina sphere-based ceramic bonded by in situ mullite whisker framework10.1016/j.matdes.2019.108334 ↗
4. Numerical investigation on the necessity of a constant strain rate condition according to material’s dynamic response behavior in the SHPB test10.1007/s11340-018-00468-x ↗
5. Mechanical and microstructural characterization of an AZ91–activated carbon syntactic foam10.3390/ma12010003 ↗
6. Ti3Sn–NiTi syntactic foams with extremely high specific strength and damping capacity fabricated by pressure melt infiltration10.1021/acsami.9b08145 ↗
7. Compressive Properties of Aluminum Matrix Syntactic Foams Prepared by Stir Casting Method10.1002/adem.201900183 ↗
8. Synthesis and characterization of novel ZnAl22 syntactic foam composites via casting10.1016/j.msea.2007.11.020 ↗
9. Compressive characteristics of metal matrix syntactic foams10.1016/j.compositesa.2012.01.008 ↗
10. Effects of particle size on the microstructure and mechanical properties of expanded glass-metal syntactic foams10.1016/j.msea.2018.04.103 ↗
11. Production and properties of 316L stainless steel cellular materials and syntactic foams10.1002/srin.201300131 ↗
12. Ultra-high energy absorption high-entropy alloy syntactic foam10.1016/j.compositesb.2020.108563 ↗
13. Fatigue characterization of functionally graded ZA27 alloy syntactic foams10.1016/j.msea.2020.140255 ↗
14. Aluminum–ceramic cenospheres syntactic foams produced by powder metallurgy route10.1016/j.matdes.2015.06.154 ↗
15. Constitutive model validation and FE cutting simulation for AA7075-T6 aluminum alloy10.1016/j.msea.2014.03.033 ↗
16. Effect of cenosphere content on the compressive deformation behaviour of aluminum-cenosphere hybrid foam10.1016/j.msea.2016.12.131 ↗
17. Strain-rate dependency and impact dynamics of closed-cell aluminium foams10.1016/j.msea.2021.141379 ↗
18. Study of TiC particle distribution in Al-MMCs using finite element modeling10.1016/j.ijmecsci.2018.04.004 ↗
19. On the sintering mechanisms and microstructure of aluminium–ceramic cenospheres syntactic foams produced by powder metallurgy route10.1016/j.compositesa.2015.11.037 ↗
20. Compressive properties of expanded glass and alumina hollow spheres hybrid reinforced aluminum matrix syntactic foams10.1016/j.jallcom.2019.153233 ↗
21. Synthesis and characterization of hollow glass sphere containing aluminum syntactic foam by spark plasma sintering and hot pressing10.3390/met9121266 ↗
22. Comparative study on microstructural characteristics and compression deformation behaviour of alumina and cenosphere reinforced aluminum syntactic foam made through stir casting technique10.1007/s12666-017-1211-x ↗
23. Dynamic properties of alumina hollow particle filled aluminum alloy A356 matrix syntactic foams10.1016/j.matdes.2014.03.041 ↗
24. Effects of ductile phase volume fraction on the mechanical properties of Ti–Al3Ti metal-intermetallic laminate (MIL) composites10.1016/j.msea.2010.12.087 ↗
25. Effect of volume fraction and wall thickness on the elastic properties of hollow particle filled composites10.1016/j.compositesb.2008.09.002 ↗
26. Mechanical properties of iron hollow sphere reinforced metal matrix syntactic foams10.4028/www.scientific.net/MSF.812.3 ↗
27. Gravity casting of aluminum-Al2O3 hollow sphere syntactic foams for improved compressive properties10.1007/s10934-020-00889-x ↗
28. Cenosphere filled aluminum syntactic foam made through stir-casting technique10.1016/j.compositesa.2008.12.006 ↗
29. Effect of microstructure on mechanical properties and residual stresses in interpenetrating aluminum-alumina composites fabricated by squeeze casting10.1016/j.msea.2017.12.091 ↗
30. Synthesis and quasi-static compressive properties of Mg-AZ91D-Al2O3 syntactic foams10.3390/ma8095292 ↗
31. Dynamic compressive behaviour of cellular materials: A review of phenomenon, mechanism and modelling10.1016/j.ijimpeng.2017.10.006 ↗
32. New insight into predicting the compression flow behavior of metal foam10.1007/s11661-020-06018-2 ↗
33. Investigation and characterisation of aluminium alloy foams with TiH2 as a foaming agent10.1080/02670836.2015.1123846 ↗
34. Effects of foaming parameters on microstructure and compressive properties of aluminum foams produced by powder metallurgy method10.1016/S1003-6326(17)60178-X ↗
35. Dynamic compression of functionally-graded metal syntactic foams10.1016/j.compstruct.2020.113308 ↗
36. Preparation and characterization of iron matrix syntactic foams with glass microspheres via powder metallurgy10.1007/s12540-018-00215-w ↗
37. Quasi-static and dynamic compression of aluminum foam at different temperatures10.1007/s11665-019-04207-8 ↗
38. Quasi-static compressive behaviour of aluminium cenosphere syntactic foams10.1080/02670836.2019.1593670 ↗
39. Quasi static and dynamic compression of zinc syntactic foams10.1016/j.jallcom.2018.07.215 ↗
40. High strain rate response of cenosphere-filled aluminum alloy syntactic foam10.1007/s11665-019-04237-2 ↗
41. Deformation behavior of Al/Cu in-situ metal-intermetallic laminates at low and high strain rates
42. Time-dependent crashworthiness of polyurethane foam10.1007/s11043-018-9391-2 ↗
43. Effects of porosity and pore size on the compressive properties of closed-cell Mg alloy foam10.1016/j.jma.2013.11.006 ↗
44. Metallic stacked origami cellular materials: additive manufacturing, properties, and modelling10.1016/j.ijsolstr.2019.09.007 ↗
45. A study on processing of a composite metal foam via casting10.1016/j.msea.2005.05.089 ↗
46. Impact of particle strength and matrix ductility on the deformation mechanism of metallic syntactic foam10.1016/j.jallcom.2019.01.283 ↗
47. Compressive deformation behavior of highly porous AA2014-cenosphere closed cell hybrid foam prepared using CaH2 as foaming agent: comparison with aluminum foam and syntactic foam10.1007/s12666-016-0984-7 ↗