journal article·2022-05

Preparation process for high-entropy alloy coatings based on electroless plating and thermal diffusion

Guixin Dai, Shiping Wu, Xixi Huang

Publisher page

Abstract

In the paper, the preparation process for high-entropy alloy coatings in the field of electroless plating was explored. According to the method for designable alloy coatings, Al-induced electroless plating was used to create multilayer coatings. The thermal diffusion process was used to alloy the multilayer coatings. Therefore, multilayer coatings as a predesigned basic material for alloy coatings needed to be discussed first. Then, the alloying process of high-entropy alloy coatings was primarily investigated. In this paper, the CuCoNi alloy coating was the main object of research. The alloying process was characterised and analysed by scanning electron microscopy and X-ray diffraction. The corrosion resistance of the coating was measured by electrochemical tests. The results show that the element distribution and the phase peaks of the multilayer coatings gradually became homogeneous and stable during thermal diffusion. The alloying process was confirmed by these changes in morphology and structure. Alloy coatings were created with controlled element types and element proportions in electroless plating. The element types of the coatings can be controlled by the deposition composition, and the element proportions can be controlled by the deposition thickness. The corrosion resistance of the alloy coating was better than that of the single-element coating. At 6 h of thermal diffusion (which is the optimum diffusion time for the CuCoNi alloy coating), the corrosion potential was − 0.218 V, and the corrosion current density was 2.72 μA/cm 2. Based on the preparation process results, the design methods for high-entropy alloy coatings were proposed.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Electrodeposition and Electroless Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. High entropy alloys – tunability of deformation mechanisms through integration of compositional and microstructural domains10.1016/j.msea.2021.141085 ↗
3. High cycle fatigue deformation mechanisms of a single phase CrMnFeCoNi high entropy alloy10.1016/j.msea.2020.139034 ↗
4. Study on properties of single-phase high entropy alloys with FCC structure based on the empirical electron theory
5. Predicting the formation and stability of single phase high-entropy alloys10.1016/j.actamat.2015.11.040 ↗
6. Design and deformation characteristics of single-phase Co-Cr-Fe-Ni-V high entropy alloy10.1016/j.jallcom.2021.161579 ↗
7. Achieving high strength and high ductility in a high-entropy alloy by a combination of a heterogeneous grain structure and oxide-dispersion strengthening10.1016/j.msea.2020.140544 ↗
8. Improved mechanical and corrosion properties of CrMnFeCoNi high entropy alloy with cold rolling and post deformation annealing process10.1016/j.jallcom.2021.161416 ↗
9. Precipitation hardening in CoCrFeNi-based high entropy alloys10.1016/j.matchemphys.2017.07.037 ↗
10. Enhancing mechanical properties of the boron doped Al0.2Co1.5CrFeNi1.5Ti0.5 high entropy alloy via tuning composition and microstructure
11. Enhancement of vacancy diffusion by C and N interstitials in the equiatomic FeMnNiCoCr high entropy alloy10.1016/j.actamat.2021.117093 ↗
12. Design and development of Co35Cr5Fe20−xNi20+xTi20 high entropy alloy with excellent magnetic softness10.1016/j.jallcom.2021.161773 ↗
13. Enhancement of strength-ductility balance of heavy Ti and Al alloyed FeCoNiCr high-entropy alloys via boron doping10.1016/j.jmst.2020.10.023 ↗
14. Exceptionally high strain-hardening and ductility due to transformation induced plasticity effect in Ti-rich high-entropy alloys10.1038/s41598-020-70298-2 ↗
15. The effect of molybdenum on the corrosion behaviour of the high-entropy alloys Co1.5CrFeNi1.5Ti0.5Mox in aqueous environments10.1016/j.corsci.2010.04.004 ↗
16. Effect of Si element on phase transformation and mechanical properties for FeCoCrNiSix high entropy alloys10.1016/j.matlet.2020.128809 ↗
17. Microstructure and mechanical properties of AlCoCrNiTi–C high entropy alloy processed through spark plasma sintering
18. Deformation substructure development in AlXCoCrFeNi (X = 0, 0.3) high entropy alloy under different influencing factors10.1016/j.jallcom.2021.162196 ↗
19. Nano-twinning enhanced room temperature fatigue crack growth in single crystalline CoCrFeMnNi high entropy alloy10.1016/j.intermet.2020.106919 ↗
20. Engineering multi-scale B2 precipitation in a heterogeneous FCC based microstructure to enhance the mechanical properties of a Al0.5Co1.5CrFeNi1.5 high entropy alloy10.1016/j.jallcom.2020.154707 ↗
21. Microstructurally flexible high entropy alloys: linkages between alloy design and deformation behavior10.1016/j.matdes.2020.108968 ↗
22. Thermal stability and mechanical properties of sputtered (Hf,Ta,V,W,Zr)-diborides10.1016/j.actamat.2020.09.018 ↗
23. Fracture and wear mechanisms of FeMnCrNiCo + x(TiC) composite high-entropy alloy cladding layers10.1016/j.apsusc.2020.148794 ↗
24. Annealing-induced microstructure and properties evolution of refractory MoFeCrTiWAlNb3 eutectic high-entropy alloy coating by laser cladding10.1016/j.intermet.2020.107039 ↗
25. Design and characterization on microstructure evolution and properties of laser-cladding Ni1.5CrFeTi2B0.5Mox high-entropy alloy coatings10.1016/j.surfcoat.2020.126793 ↗
26. Microstructure evolution and mechanical properties of atmosphere plasma sprayed AlCoCrFeNi high-entropy alloy coatings under post-annealing10.1016/j.jallcom.2021.159607 ↗
27. Microstructure and mechanical properties of CoCrFeNiMo high-entropy alloy coatings10.1016/j.jmrt.2020.03.029 ↗
28. Microstructure evolution and properties of NiTiCrNbTax refractory high-entropy alloy coatings with variable Ta content
29. Effect of Fe on microstructure and properties of AlCoCrFexNi (x=1.5, 2.5) high entropy alloy coatings prepared by laser cladding10.1016/j.intermet.2020.106722 ↗
30. Microstructure and dislocation density of AlCoCrFeNiSix high entropy alloy coatings by laser cladding10.1016/j.matlet.2020.128746 ↗
31. Microstructures and properties of high-entropy alloy films and coatings: a review10.1080/21663831.2018.1434248 ↗
32. Effects of nitriding on the microstructure and properties of VAlTiCrMo high-entropy alloy coatings by sputtering technique10.1016/j.jallcom.2020.153836 ↗
33. Microstructure and tribological properties of AlCrFe2Ni2W0.2Mo0.75 highentropy alloy coating prepared by laser cladding in seawater, NaCl solution and deionized water10.1016/j.surfcoat.2020.126214 ↗
34. Design and characterization of FeCrCoAlMn0.5Mo0.1 high-entropy alloy coating by ultrasonic assisted laser cladding10.1016/j.jallcom.2020.155449 ↗
35. High-temperature oxidation resistance of Ni–P and Ni–B electroless coatings on mild steel after long-term tests
36. B.W. Zhang, Chapter 5–Electroless plating Fe-based alloys, Amorphous & Nano Alloys Electroless Depositions (2016) 291‒321.10.1016/B978-0-12-802685-4.00005-4 ↗
37. Characterization of Al-induced electroless tin films on mild steel substrate for corrosion protection10.1088/2051-672X/ab82a4 ↗
38. A new concept for electroless nickel plating: aluminium as reducing agent10.1039/C6RA01435F ↗
39. Aluminum-induced direct electroless deposition of Co and Co-P coatings on copper and their catalytic performance for electrochemical water splitting10.1016/j.surfcoat.2018.07.092 ↗
40. R. Buchanan, E. Stansbury, 4-Electrochemical Corrosion, Handbook of Environmental Degradation of Materials (2012) 87‒125.10.1016/B978-1-4377-3455-3.00004-3 ↗
41. Passivation behavior of VAlTiCrSi amorphous high-entropy alloy film with a high corrosion-resistance in artificial sea water10.1016/j.apsusc.2020.148520 ↗
42. A feasible method for the fabrication of VAlTiCrSi amorphous high entropy alloy film with outstanding anti-corrosion property10.1016/j.apsusc.2019.03.338 ↗
43. Corrosion-resistant high-entropy alloys: a review
44. Multiscale mechanical performance and corrosion behaviour of plasma sprayed AlCoCrFeNi high-entropy alloy coatings10.1016/j.jallcom.2020.157140 ↗