journal article·2022-04Open access

Influence of Mo/Cr ratio on the lamellar microstructure and mechanical properties of as-cast Al0.75CoCrFeNi compositionally complex alloys

Alex Asabre, Parham Gemagami, Alireza Basir Parsa, Christian Wagner, Aleksander Kostka, Guillaume Laplanche

Abstract

The Al0.75CoCrFeNi alloy (Al16Co21Cr21Fe21Ni21 in at.%) presents a lamellar microstructure in the as-cast state consisting of a spinodally-decomposed B2/BCC matrix and Widmanstätten-type FCC plates. In this study, to retain the lamellar microstructure and improve tensile strength, Al16Co21Cr21-xFe21Ni21Mox alloys with x ≤ 10 at.% were investigated. For x = 2 at.%, the Widmanstätten microstructure changed into a vermicular one due to the stabilization of the BCC phase. With increasing the Mo/Cr ratio, the BCC phase transformed into topologically close-packed (TCP) phases, i.e., σ phase for x = 4 at.% and R phase for x ≥ 6 at.%, whose volume fractions increases with x. The as-cast alloys with x = 10 and 4 at.% presented the largest microhardness of ~600 HV0.5. The former had the highest volume fraction in TCP phases, which are hard and brittle while the latter presented the finest microstructure (enhanced phase boundary strengthening). While the alloys with x > 4 at.% were too brittle to machine tensile specimens, the others were tested between 20 and 700 °C. The ultimate tensile strength increased with increasing x up to ~1460 MPa for x = 4 at.% at 400 °C. At 700 °C, the strength of all alloys significantly decreased due to the softening of the B2 phase. Most of them had limited ductility and showed intergranular fracture except for x = 4 at.% presenting pronounced necking with ~38% ductility. The latter effect was attributed to the occurrence of interfacial sliding resulting in cavitation at grain boundaries and interphase boundaries.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (79)

Show source-provided references
1. Effect of aluminum contents on microstructure and properties of AlxCoCrFeNi alloys10.1016/j.jallcom.2010.03.111 ↗
2. Understanding the mechanical behaviour and the large strength/ductility differences between FCC and BCC AlxCoCrFeNi high entropy alloys10.1016/j.jallcom.2017.08.067 ↗
3. Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys10.1016/j.intermet.2012.03.005 ↗
4. Fabrication of bulk Al-Co-Cr-Fe-Ni high-entropy alloy using combined cable wire arc additive manufacturing (CCW-AAM): Microstructure and mechanical properties10.1016/j.jmst.2020.10.037 ↗
5. The tribological properties of Al0.6CoCrFeNi high-entropy alloy with the σ phase precipitation at elevated temperature10.1016/j.jallcom.2018.10.393 ↗
6. The sliding wear behaviour of CoCrFeMnNi and AlxCoCrFeNi high entropy alloys at elevated temperatures10.1016/j.wear.2019.03.002 ↗
7. Plastic strain partitioning in dual phase Al13CoCrFeNi high entropy alloy10.1016/j.msea.2018.02.044 ↗
8. Effect of Al, Ti and C additions on Widmanstätten microstructures and mechanical properties of cast Al0.6CoCrFeNi compositionally complex alloys10.1016/j.matdes.2019.108201 ↗
9. Microstructure and mechanical properties of Al0.7CoCrFeNi high-entropy-alloy prepared by directional solidification10.1016/j.intermet.2017.11.019 ↗
10. Dynamic shear deformation of a precipitation hardened Al0.7CoCrFeNi eutectic high-entropy alloy using hat-shaped specimen geometry10.3390/e22040431 ↗
11. Orientation relationships in Al0.7CoCrFeNi high-entropy alloy10.1017/S1431927617012442 ↗
12. The BCC-FCC phase transformation pathways and crystal orientation relationships in dual phase materials from Al-(Co)-Cr-Fe-Ni alloys10.3389/fmats.2020.00287 ↗
13. Phase equilibria in the Al–Co–Cr–Fe–Ni high entropy alloy system: thermodynamic description and experimental study10.3389/fmats.2020.00270 ↗
14. Hierarchical phase evolution in a lamellar Al0.7CoCrFeNi high entropy alloy involving competing metastable and stable phases10.1016/j.scriptamat.2021.114137 ↗
15. The principles of the fibre reinforcement of metals10.1179/095066065790138357 ↗
16. Alloy design, using second phases10.1007/BF02644252 ↗
17. Elastic moduli and thermal expansion coefficients of medium-entropy subsystems of the CrMnFeCoNi high-entropy alloy10.1016/j.jallcom.2018.02.251 ↗
18. Processing of a single-crystalline CrCoNi medium-entropy alloy and evolution of its thermal expansion and elastic stiffness coefficients with temperature10.1016/j.scriptamat.2019.09.020 ↗
19. Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures10.1016/j.actamat.2014.08.026 ↗
20. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
21. Temperature and load-ratio dependent fatigue-crack growth in the CrMnFeCoNi high-entropy alloy10.1016/j.jallcom.2019.04.234 ↗
22. Effects of cryogenic temperature and grain size on fatigue-crack propagation in the medium-entropy CrCoNi alloy10.1016/j.actamat.2020.09.021 ↗
23. High-temperature low cycle fatigue behavior of an equiatomic CoCrFeMnNi high-entropy alloy10.1016/j.msea.2020.139781 ↗
24. Superior low-cycle fatigue properties of CoCrNi compared to CoCrFeMnNi10.1016/j.scriptamat.2020.113667 ↗
25. The effects of secondary elemental Mo or Ti addition in Al0.3CoCrFeNi high-entropy alloy on age hardening at 700 °C10.1016/j.jallcom.2010.02.032 ↗
26. Microstructure and mechanical properties of multiprincipal component CoCrFeNiMox alloys10.1016/j.matchar.2012.05.005 ↗
27. Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases10.1016/j.actamat.2016.06.063 ↗
28. Deformation mechanisms of Mo alloyed FeCoCrNi high entropy alloy: In situ neutron diffraction10.1016/j.actamat.2017.01.034 ↗
29. Effect of μ-precipitates on the microstructure and mechanical properties of non-equiatomic CoCrFeNiMo medium-entropy alloys10.1016/j.jallcom.2018.12.040 ↗
30. Microstructures and compressive properties of multicomponent AlCoCrCuFeNiMox alloys10.1016/j.jallcom.2010.03.074 ↗
31. Microstructures and compressive properties of multicomponent AlCoCrFeNiMox alloys10.1016/j.msea.2010.07.028 ↗
32. Microstructure and mechanical properties of multi-component AlCrFeNiMox high-entropy alloys10.1016/j.jallcom.2013.03.253 ↗
33. Effects of annealing treatment on microstructure and hardness of bulk AlCrFeNiMo0.2 eutectic high-entropy alloy10.1016/j.matdes.2015.05.046 ↗
34. The influence of Mo additions on the microstructure and mechanical properties of AlCrFe2Ni2 medium entropy alloys10.3389/fmats.2020.00296 ↗
35. MAUD: a friendly Java program for material analysis using diffraction
36. NIH Image to ImageJ: 25 years of image analysis10.1038/nmeth.2089 ↗
37. A promising new class of high-temperature alloys: eutectic high-entropy alloys10.1038/srep06200 ↗
38. A multi-component AlCrFe2Ni2 alloy with excellent mechanical properties10.1016/j.matlet.2016.01.096 ↗
39. On the superior hot hardness and softening resistance of AlCoCrxFeMo0.5Ni high-entropy alloys10.1016/j.msea.2011.01.072 ↗
40. On microstructure and mechanical performance of AlCoCrFeMo0.5Nix high-entropy alloys10.1016/j.intermet.2012.09.008 ↗
41. The crystal structure of the R phase, Mo–Co–Cr10.1107/S0365110X60001394 ↗
42. Phases, microstructure and mechanical properties of AlxCoCrFeNi high-entropy alloys at elevated temperatures10.1016/j.jallcom.2013.11.084 ↗
43. Change in the primary solidification phase from fcc to bcc-based B2 in high entropy or complex concentrated alloys10.1016/j.scriptamat.2016.09.023 ↗
44. Precipitation strengthening of ductile Cr15Fe20Co35Ni20Mo10 alloys10.1016/j.scriptamat.2017.05.019 ↗
45. Effect of iron content on wear behavior of AlCoCrFexMo0.5Ni high-entropy alloys10.1016/j.wear.2009.10.013 ↗
46. Effect of molybdenum on phases, microstructure and mechanical properties of Al0.5CoCrFeMoxNi high entropy alloys10.1016/j.jallcom.2018.02.003 ↗
47. Crystal chemistry and Calphad modeling of the σ phase10.1016/j.pmatsci.2007.04.001 ↗
48. Sigma-phase in Fe-Cr and Fe-V alloy systems and its physical properties10.1080/10408436.2011.589232 ↗
49. Topologically close-packed structures of transition metal alloys10.1016/0079-6425(72)90002-3 ↗
50. The growth of the Widmanstätten pattern in metallic meteorites10.1016/0016-7037(65)90085-2 ↗
51. Mechanism of Widmanstätten Austenite Formation in a δ/γ Duplex Phase Stainless Steel10.2355/isijinternational.35.969 ↗
52. Effects of aluminum on microstructure and compressive properties of Al-Cr-Fe-Ni eutectic multi-component alloys10.1016/j.msea.2016.11.019 ↗
53. Combinatorial exploration of B2/L21 precipitation strengthened AlCrFeNiTi compositionally complex alloys10.1016/j.jallcom.2020.156111 ↗
54. Untersuchungen über die Temperaturabhängigkeit des Elastizitätsmoduls der Eisen‐Chrom‐Sigmaphase10.1002/srin.195802259 ↗
55. The sigma phase10.1179/imr.1966.11.1.61 ↗
56. Porter · 2009
57. Growth kinetics of σ-phase precipitates and underlying diffusion processes in CrMnFeCoNi high-entropy alloys10.1016/j.actamat.2020.08.023 ↗
58. Relationship between the microstructure and mechanical properties of an equiatomic AlCoCrFeNi high-entropy alloy fabricated by selective electron beam melting10.1016/j.msea.2016.01.019 ↗
59. Laser metal deposition of Al0.6CoCrFeNi with Ti & C additions using elemental powder blends10.1016/j.surfcoat.2021.127233 ↗
60. The exceptional strong face-centered cubic phase and semi-coherent phase boundary in a eutectic dual-phase high entropy alloy AlCoCrFeNi
61. Size dependent plasticity and damage response in multiphase body centered cubic high entropy alloys10.1016/j.actamat.2018.03.015 ↗
62. Evolution of the microstructure and mechanical properties of eutectic Fe30Ni20Mn35Al1510.1007/s10853-010-5197-6 ↗
63. Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys10.1016/j.intermet.2013.10.024 ↗
64. Microstructural evolution of spinodally formed Fe35Ni15Mn25Al2510.1016/j.intermet.2009.03.016 ↗
65. Understanding the role of the constituting elements of the AlCoCrFeNi high entropy alloy through the investigation of quaternary alloys10.3390/met10101275 ↗
66. Temperature dependence of the hardness of secondary phases common in turbine bucket alloys10.1007/BF03397938 ↗
67. Effect of sigma phase on thermophysical properties of Fe55Cr45 alloy10.1016/j.intermet.2019.106552 ↗
68. Optimizing the coupled effects of Hall-Petch and precipitation strengthening in a Al0.3CoCrFeNi high entropy alloy10.1016/j.matdes.2017.02.072 ↗
69. Effect of temperature and texture on hall–petch strengthening by grain and annealing twin boundaries in the MnFeNi medium-entropy alloy10.3390/met9010084 ↗
70. Microstructure and properties of FeAlCrNiMox high-entropy alloys10.1007/s11665-016-2060-1 ↗
71. Tracer diffusion in the σ phase of the CoCrFeMnNi system10.1016/j.actamat.2020.116498 ↗
72. Overview of intermetallic sigma (σ) phase precipitation in stainless steels
73. Lamellar coarsening in Fe28Ni18Mn33Al21 and its influence on room temperature tensile behavior10.1016/j.actamat.2015.05.006 ↗
74. The deformation properties and electron microscopy studies of the intermetallic compound NiAl10.1016/0001-6160(66)90251-3 ↗
75. Flow and fracture of Fe-Al10.1016/0025-5416(87)90549-0 ↗
76. A review of the mechanical properties of B2 compounds10.1016/0921-5093(94)03200-9 ↗
77. Room temperature deformation behavior of multiphase Ni-20at.%Al-30at.%Fe and its constituent phases10.1016/0921-5093(91)90341-J ↗
78. On the room-temperature deformation mechanisms of lamellar-structured Fe30Ni20Mn35Al1510.1016/j.msea.2011.01.089 ↗
79. Analysis of strengthening due to grain boundaries and annealing twin boundaries in the CrCoNi medium-entropy alloy10.1016/j.ijplas.2019.08.009 ↗