Sub-second sintering process for La6Sr4Co2Fe8O3-δ-gadolinium doped ceria composite cathode via a flash light irradiation method for intermediate temperature-solid oxide fuel cells
Source abstract
Abstract
ABSTRACT A solid oxide fuel cell (SOFC) requires an elevated operating temperature to achieve high oxygen ion conductivity and the oxygen reduction reaction (ORR). However, at high operating temperatures above 800°C, performance deteriorates due to the chemical reaction of the electrode and electrolyte materials at the interface. Therefore, it is necessary to lower the operating temperature to the intermediate temperature regime while maintaining the high oxygen reduction reaction kinetics. One approach is adopting the composite cathode material such as La6Sr4Co2Fe8O3-δ-gadolinium doped ceria (LSCF-GDC). However, the high temperature in the fabrication process results in non-conduction material of strontium zirconate (SrZrO3, SZO) layers at the cathode/electrolyte interface, which blocks oxygen ion conduction and degrades the fuel cell performance. By utilizing the novel flash light sintering process, which can be completed in a few seconds, high temperature fabrication issues are solved. The surface microstructure and thickness of the composite electrode are inspected using a scanning electron microscope (FE-SEM). The secondary phase generation and chemical reaction are analyzed using XRD (X-ray diffraction), SEM-EDS, and TEM-EDS. The anode supported LSCF-GDC cathode cells are measured from 600°C to 750°C. The maximum power density at 750°C of the novel flash light sintered LSCF-GDC composite cathode cell is 727.4 mW/cm2. In addition to the utilization of high performing cathode structure, the flash light sintering process dramatically reduces the process time and suppresses the side reaction at the cathode/electrolyte interface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Catalysis and Oxidation Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Direct oxidation of hydrocarbons in a solid-oxide fuel cell10.1038/35005040 ↗
2. Solid oxide fuel cells (SOFCs): a review of an environmentally clean and efficient source of energy10.1016/S1364-0321(02)00014-X ↗
3. Fuel cell materials and components☆☆☆The Golden Jubilee Issue—selected topics in materials science and engineering: past, present and future, edited by S. Suresh10.1016/j.actamat.2003.08.004 ↗
4. Stability of solid oxide fuel cell components10.1016/S0167-2738(01)00831-1 ↗
5. The degradation of SOFC electrodes10.1016/S0167-2738(97)00106-9 ↗
6. Survey of materials selection for ceramic fuel cells II. Cathodes and anodes10.1016/0167-2738(96)00291-3 ↗
7. Review and analysis of characterization methods and ionic conductivities for low-temperature solid oxide fuel cells (LT-SOFC)10.1016/j.jpowsour.2014.04.008 ↗
8. Prediction of infiltrated solid oxide fuel cell cathode polarization resistance10.1016/j.elecom.2008.10.006 ↗
9. Stability and performance of infiltrated La0.8Sr0.2CoxFe1−xO3 electrodes with and without Sm0.2Ce0.8O1.9 interlayers10.1016/j.jpowsour.2011.03.022 ↗
10. A high-performance cathode for the next generation of solid-oxide fuel cells10.1038/nature02863 ↗
11. Novel materials for solid oxide fuel cell technologies: a literature review10.1016/j.ijhydene.2017.08.105 ↗
12. Fabrication of lanthanum strontium cobalt ferrite (LSCF) cathodes for high performance solid oxide fuel cells using a low price commercial inkjet printer10.1016/j.jpowsour.2015.12.067 ↗
13. Electrochemical performance of (La,Sr)(Co,Fe)O3–(Ce,Gd)O3 composite cathodes10.1016/S0167-2738(02)00102-9 ↗
14. A stability study of impregnated LSCF–GDC composite cathodes of solid oxide fuel cells10.1016/j.jallcom.2013.05.021 ↗
15. Determination of surface exchange coefficients of LSM, LSCF, YSZ, GDC constituent materials in composite SOFC cathodes10.1149/1.3555122 ↗
16. Development of LSCF–GDC composite cathodes for low-temperature solid oxide fuel cells with thin film GDC electrolyte10.1016/j.ijhydene.2008.04.034 ↗
17. Influence of sintering temperature on morphology and electrochemical performance of LSCF/GDC composite films as efficient cathode for SOFC10.1016/j.electacta.2017.06.070 ↗
18. Effect of polarization on Sr and Zr diffusion behavior in LSCF/GDC/YSZ system10.1016/j.ssi.2014.04.002 ↗
19. Nature and functionality of La0.58Sr0.4Co0.2Fe0.8O3-δ/ Gd0.2Ce0.8O2-δ/ Y0.16Zr0.84O2-δ interfaces in SOFCs10.1149/2.0031811jes ↗
20. Controlling cation migration and inter-diffusion across cathode/interlayer/electrolyte interfaces of solid oxide fuel cells: a review10.1016/j.ceramint.2020.11.002 ↗
21. Efficiency of a dense thin CGO buffer layer for solid oxide fuel cell operating at intermediate temperature10.1016/j.ssi.2013.07.004 ↗
22. Direct application of cobaltite-based perovskite cathodes on the yttria-stabilized zirconia electrolyte for intermediate temperature solid oxide fuel cells10.1039/C6TA07067A ↗
23. Suppressed Sr segregation and performance of directly assembled La0.6Sr0.4Co0.2Fe0.8O3-δ oxygen electrode on Y2O3-ZrO2 electrolyte of solid oxide electrolysis cells10.1016/j.jpowsour.2018.02.082 ↗
24. Highly durable solid oxide fuel cells: suppressing chemical degradation via rational design of a diffusion-blocking layer10.1039/C8TA04974B ↗
25. Influence of La0.6Sr0.4Co0.2Fe0.8O3-δ microstructure on GDC interlayer stability and cation diffusion across the LSCF/GDC/YSZ interfaces10.1149/2.0021614jes ↗
26. Microstructure tailoring of solid oxide electrolysis cell air electrode to boost performance and long-term durability10.1016/j.cej.2020.128318 ↗
27. A review of solid oxide fuel cell component fabrication methods toward lowering temperature10.1002/er.4907 ↗
28. Ultrafast photo-annealed carbon-coated SiO2 sphere electrodes for NO2 gas sensing10.1016/j.carbon.2020.03.008 ↗
29. Optimizing the surface characteristics of La0.6Sr0.4CoO3−δ perovskite oxide by rapid flash sintering technology for easy fabrication and fast reaction kinetics in alkaline medium10.1021/acs.energyfuels.0c03147 ↗
30. Intense pulsed light sintering of screen-printed paste electrode on silicon solar cell for high throughput and cost-effective low temperature metallization
31. Optimization of intense pulsed light sintering considering dimensions of printed Cu nano/micro-paste patterns for printed electronics10.1007/s40684-019-00180-8 ↗
32. Flash light sintered SDC cathodic interlayer for enhanced oxygen reduction reaction in LT-SOFCs10.1016/j.jallcom.2020.158397 ↗
33. Ultra-fast fabrication of lanthanum strontium manganese thin films using intense pulsed light irradiation10.1016/j.ceramint.2019.09.119 ↗
34. Rapid fabrication of chemical solution-deposited lanthanum nickelate thin films via intense pulsed-light process10.3390/coatings9060372 ↗
35. Compatibility of proton conducting La6WO12 electrolyte with standard cathode materials10.1016/j.ssi.2011.11.003 ↗
36. Recent developments in solid oxide fuel cell materials10.1002/1615-6854(200107)1:2<117::AID-FUCE117>3.0.CO;2-Y ↗
37. Synthesis and characterization of Ca doped LaMnO3 as potential anode material for solid oxide electrolysis cells10.1016/j.ceramint.2016.09.177 ↗
38. Crystal structure, oxygen nonstoichiometry, and mass and charge transport properties of the Sr-free SOFC/SOEC air electrode material La0.75Ca0.25FeO3-δ10.1016/j.jssc.2019.02.032 ↗
39. Low-temperature processing technique of Ruddlesden-Popper cathode for high-performance solid oxide fuel cells10.1016/j.jallcom.2021.159092 ↗
40. Electrochemical performance of LSCF-based composite cathodes for intermediate temperature SOFCs10.1016/j.jpowsour.2005.02.063 ↗