journal article·2022-03

The influence of sintering temperature on the mechanical evolution of Al2TiO5 flexible ceramics based on the acoustic emission

Qingliang Shan, Changrong Chen, Qiankun Xu, Yudong Xue, Qian Ma, Yuqian Zhou, Anze Shui

Publisher page

Abstract

Abstract To explore the influence of sintering temperature on mechanical properties of Al2TiO5 (AT) flexible ceramics, the XRD/Raman, SEM and acoustic emission (AE) technology were used to estimate the phase composition, microstructure evolution and damage behaviors of AT ceramics, respectively. Results show that the diffraction peaks of AT increase before rising sintering temperature from 1300 °C to 1500 °C and then start to decrease at 1600 °C due to the decomposition of AT grains. In specimens with sintering temperature of 1300 °C and 1400 °C, intergranular fractures are more likely to occur, which controls the origination of AE events in the whole stage. And the fracture of big bodies composed by large number of fine AT grains is the main source of AE events with high energy level at initial stage. In addition, Thanks to the more transgranular fracture in specimens with sintering temperature of 1500 °C and 1600 °C, the number of AE events in these two specimens are more than that of specimens with sintering temperature of 1300 °C and 1400 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Aluminum titanate-a literature review. Part 2. Engineering properties and thermal stability
2. Aluminium titanate-a literature review. Part 1. Microcracking phenomena
3. Thermal and mechanical properties of aluminum titanate-mullite composites10.1557/JMR.2000.0056 ↗
4. formation of aluminum titanate with small additions of MgO and SiO210.1590/1980-5373-MR-2015-0498 ↗
5. Synthesis and thermal stability of aluminum titanate solid solutions10.1111/j.1151-2916.1987.tb04931.x ↗
6. The effect of Fe2O3 addition on tialite formation10.1016/j.ceramint.2008.02.009 ↗
7. Effect of Mg-and Fe-ions on formation mechanism of aluminium titanate10.1016/j.ceramint.2008.07.017 ↗
8. Effect of variation of lattice constants on the thermal stability of aluminium titanate
9. Diffraction, structure and phase stability studies on aluminium titanate10.1016/j.jeurceramsoc.2008.05.037 ↗
10. Measurement of crack volume due to thermal expansion anisotropy in aluminum titanate ceramics10.1007/BF00357864 ↗
11. Thermo-elastic behaviour of a natural quartzite: itacolumite10.1007/s10853-007-2414-z ↗
12. Preparation and thermomechanical characterisation of aluminum titanate flexible ceramics10.1007/s10853-010-4897-2 ↗
13. Preparation of aluminum titanate flexible ceramic by solid-phase sintering and its mechanical behavior10.1016/j.jallcom.2018.09.317 ↗
14. Damage monitoring and identification in SiC/SiC minicomposites using combined acousto-ultrasonics and acoustic emission. Compos10.1016/j.compositesa.2013.10.010 ↗
15. Stress-dependent matrix cracking in 2D woven SiC-fiber reinforced melt-infiltrated SiC matrix composites10.1016/j.compscitech.2003.10.022 ↗
16. Fracture behavior and damage mechanisms identification of SiC/glass ceramic composites using AE monitoring10.1016/j.compscitech.2005.02.002 ↗
17. The influence of different additives on microstructure and mechanical properties of aluminum titanate ceramics10.1016/j.ceramint.2020.08.234 ↗
18. Preparation of Al2TiO5-ZrO2 mixed powders via sol-gel process10.1007/BF00486273 ↗
19. Effect of nanostructuring on thermal stability and decomposition of aluminium titanate (Al2TiO5): a phase transformation study10.1016/j.matchar.2020.110764 ↗
20. The use of Raman spectroscopy for characterisation of ceramic dielectrics10.1080/10589750108953111 ↗
21. Excitation frequency dependence and fluorescence in the Raman spectra of Al2O310.1366/0003702971941331 ↗
22. Photoluminescence and Raman studies in swift heavy ion irradiated polycrystalline aluminum oxide10.1007/s12034-009-0076-y ↗
23. Raman spectroscopy characterization of TiO2 rutile nanocrystals10.1103/PhysRevB.75.045416 ↗
24. Synthesis of highly active heterostructured Al2TiO5/TiO2 photocatalyst in a neutral medium10.1155/2020/6684791 ↗
25. Low-temperature nucleation of rutile observed by Raman spectroscopy during crystallization of TiO210.1111/j.1151-2916.1992.tb07237.x ↗
26. Analysis of the grain-size dependence of strength10.1111/j.1151-2916.1980.tb10670.x ↗
27. Relation between strength, microstructure, and grain-bridging characteristics in in situ reinforced silicon nitride10.1111/j.1151-2916.1995.tb08823.x ↗
28. Correlation of machining-grain-size effects on tensile strength with tensile strength-grain-size behavior10.1111/j.1151-2916.1993.tb05339.x ↗
29. Modeling stress-dependent matrix cracking and stress-strain behavior in 2D woven SiC fiber reinforced CVI SiC composites10.1016/j.compscitech.2006.06.007 ↗
30. The surface cracking resistance of Al2O3-modified SiCf/SiC-B4C composites after cyclic oxidation in wet environment10.1002/adem.201900458 ↗
31. Monitoring the flexural performance of GFRP repaired corroded reinforced concrete beams using passive acoustic emission technique10.1002/suco.202000247 ↗
32. Damage monitoring and identification in SiC/SiC minicomposites using combined acousto-ultrasonics and acoustic emission10.1016/j.compositesa.2013.10.010 ↗
33. Influence of time-dependent phenomena on translaminar fracture of woven-ply C/PPS laminates above the glass transition temperature10.1016/j.compositesb.2019.107561 ↗
34. The influence of shaping method on the grain size dependence of strength in dense submicrometre alumina10.1016/0955-2219(96)00044-1 ↗
35. Effect of grain size on the static and dynamic mechanical properties ofmagnesium aluminate spinel (MgAl2O4)10.1016/j.jeurceramsoc.2017.04.025 ↗
36. Influence of grain boundary and grain size on the mechanical properties of polycrystalline ceramics: grain-scale simulations10.1111/jace.17286 ↗
37. Nano/ultrafine grained immiscible Fe-Cu alloy with ultrahigh strength produced by selective laser melting10.1080/21663831.2021.1884620 ↗
38. Grain size-dependent Sc microalloying effect on the yield strength-pittingcorrosion correlation in Al-Cu alloys10.1016/j.msea.2018.02.089 ↗
39. Improvement of strength-toughness combination in austempered low carbon bainitic steel: The key role of refining prior austenite grain size10.1016/j.jallcom.2017.03.024 ↗
40. Grain size/microcracking relations for pseudobrookite oxides10.1111/j.1151-2916.1978.tb16121.x ↗