Effect of chromium addition on the reactivation of the titanium-iron-manganese (TiFe0.85Mn0.15) alloy
Source abstract
Abstract
Abstract Titanium-iron (TiFe) is known to be highly sensitive to oxidation, and this impacts its use in hydrogen storage applications. To investigate the ability to control the surface oxidation of TiFe-based alloys, TiFe0.85Mn0.15 was used as a base alloy due to its ease of activation and the addition of Cr investigated to facilitate its re-activation upon oxidation. Upon the formation of TiFe0.85Mn0.15Crx (x = 0.15 and 0.30) an improvement in reactivation was observed. After exposure of TiFe0.85Mn0.15Cr0.30 to air for 2 h, the alloy could be re-activated at 150 °C under a 3 MPa hydrogen pressure. In comparison, a temperature of 300 °C under the same hydrogen pressure was needed to re-activate TiFe0.85Mn0.15. This indicates that Cr addition provided to some extent resistance against deactivation. This is also reflected in the HP-DSC measurements where a partial oxide reduction was observed at 100 °C for the oxidised TiFe0.85Mn0.15Cr0.30 alloy as opposed to the 220 °C of TiFe0.85Mn0.15. The partially reduced species acted as catalytic sites for hydrogen activation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen Storage and Materials · Hybrid Renewable Energy Systems · Catalysis and Hydrodesulfurization Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Hydrogen storage materials for mobile and stationary applications: current state of the art10.1002/cssc.201500231 ↗
2. Formation and properties of iron titanium hydride10.1021/ic50131a042 ↗
3. A panoramic overview of hydrogen storage alloys from a gas reaction point of view10.1016/S0925-8388(99)00384-9 ↗
4. Surface poisoning of LaNi5, FeTi and (Fe,Mn)Ti by O2, Co and H2O10.1016/0022-5088(80)90355-0 ↗
5. Surface effects and the formation of metal hydrides10.1016/0022-5088(80)90354-9 ↗
6. How additives of Mn improve the hydrogenation characteristics of FeTi – and the role of its subsurface10.1016/0038-1098(82)90149-1 ↗
7. An auger study of the adsorption of oxygen on TiNi, TiFe and Ti4Fe2O10.1016/0039-6028(87)90071-9 ↗
8. Auger electron spectroscopy investigation of the activation of TiFe for hydrogen uptake10.1016/0022-5088(84)90344-8 ↗
9. Initial oxidation of TiFe1−xMnx (x=0–0.3) by low dose exposures to H2O and O210.1016/j.jallcom.2014.04.196 ↗
10. First hydrogenation kinetics of Zr and Mn doped TiFe alloy after air exposure and reactivation by mechanical treatment10.1016/j.ijhydene.2020.02.043 ↗
11. Hydrogen storage in aluminium-substituted TiFe compounds10.1016/0360-3199(81)90006-9 ↗
12. Correlation of substitutional solid solution with hydrogenation properties of TiFe1−xMx (M=Ni, Co, Al) alloys10.1016/S0925-8388(99)00262-5 ↗
13. Investigations on gaseous hydrogen storage performances and reactivation ability of as-cast TiFe1−xNix (x=0, 0.1, 0.2 and 0.4) alloys10.1016/j.ijhydene.2018.12.144 ↗
14. Hydrogenation characteristics of TiFe1−xPdx (0.05≤x≤0.30) alloys10.1016/S0925-8388(96)02925-8 ↗
15. Influence of the addition of vanadium on the hydrogenation properties of the compounds TiFe0.9Vx and TiFe0.8Mn0.1Vx (x=0, 0.05 and 0.1)10.1016/j.jallcom.2011.02.036 ↗
16. Tuning the hydrogen storage properties of TiFe clusters via Zr substitution10.1002/est2.157 ↗
17. Effect of high zirconium content on hydrogenation properties and anti-poisoning ability of air-exposed TiFe alloy10.1016/j.jmrt.2019.09.072 ↗
18. Hydrogen storage properties of TiFe-based ternary mechanical alloys with cobalt and niobium. A thermochemical approach10.1016/j.ijhydene.2019.03.057 ↗
19. Hydrides of ternary TiFexM1−x(M=Cr, Mn, Co, Ni) intermetallics10.1063/1.329808 ↗
20. Effect of the second phase on the initiation of hydrogenation of TiFe1−xMx (M = Cr,Mn) alloys10.1016/0360-3199(94)90095-7 ↗
21. Substitutional effects in TiFe for hydrogen storage: a comprehensive review10.1039/D1MA00101A ↗
22. Hydrogenation properties of Ti-Fe-Mn alloy with Cu and Y as additives10.1016/j.ijhydene.2016.09.037 ↗
23. Effects of Ce on the hydrogen storage properties of TiFe0.9Mn0.1 alloy10.1016/j.ijhydene.2017.01.194 ↗
24. Effects of Co introduction on hydrogen storage properties of Ti–Fe–Mn alloys10.1016/j.ijhydene.2014.12.089 ↗
25. Structure and hydrogenation performances of as-cast Ti1.1−xRExFe0.8Mn0.2 (RE = Pr, Sm and Nd; x = 0, 0.01) alloys10.1016/j.ijhydene.2018.08.046 ↗
26. Hydrogenation of FeTi-based alloys containing β-Ti10.1016/0022-5088(82)90255-7 ↗
27. Hydrogen storage behavior and microstructural feature of a TiFe–ZrCr2 alloy10.1016/j.jallcom.2020.157099 ↗
28. Hydrogen storage properties of Fe-Ti-O alloys
29. Effect of simultaneous addition of oxygen with copper or niobium on the hydriding characteristics of FeTi for hydrogen storage10.1016/0022-5088(86)90203-1 ↗
30. Development of Ti–Cr–Mn–Fe based alloys with high hydrogen desorption pressures for hybrid hydrogen storage vessel application10.1016/j.ijhydene.2013.07.073 ↗
31. Model for hydrogen desorption plateau pressure of AB2 type-Tix(CrFeMn)2 alloys10.1016/j.intermet.2018.12.016 ↗
32. Effect of chromium, manganese and yttrium on microstructure and hydrogen storage properties of TiFe-based alloy10.1016/j.ijhydene.2020.02.086 ↗
33. Mechanical alloying of nanocrystalline intermetallic compound TiFe doped by aluminum and chromium10.1016/j.jallcom.2013.01.138 ↗
34. Effect of nickel alloying by using ball milling on the hydrogen absorption properties of TiFe10.1016/S0360-3199(98)00163-3 ↗
35. Hydrogen storage nanocrystalline TiFe intermetallic compound: synthesis by mechanical alloying and compacting10.1016/j.ijhydene.2012.08.078 ↗
36. Hydrogen storage performance of TiFe after processing by ball milling10.1016/j.actamat.2014.12.052 ↗
37. Activation of Ti–Fe–Cr alloys containing identical AB2 fractions10.1016/j.jallcom.2021.158876 ↗
38. The Fe−Ti (iron-titanium) system10.1007/BF02868286 ↗
39. Mechanically induced instability in Fe2Ti and mechanical alloying of Fe and Ti10.1023/B:JMSC.0000020019.23220.98 ↗
40. Impact of severe plastic deformation on microstructure and hydrogen storage of titanium-iron-manganese intermetallics10.1016/j.scriptamat.2016.07.007 ↗
41. Effect of Fe substitution on first hydrogenation kinetics of TiFe-based hydrogen storage alloys after air exposure10.1016/j.ijhydene.2021.06.188 ↗
42. Synthesis of TiFe hydrogen absorbing alloys prepared by mechanical alloying and SPS treatment10.3390/met8040264 ↗
43. An XPS study of the electronic structure of the ZnxCd1−xCr2(X = S, Se) spinel system10.1016/0022-3697(89)90487-3 ↗
44. Use of X‐ray photoelectron spectroscopy to study bonding in Cr, Mn, Fe, and Co compounds10.1063/1.1678348 ↗
45. Hydrogenation properties of TiFe with Zr7Ni10 alloy as additive10.1016/j.jallcom.2015.02.104 ↗