The evolutions of mechanical properties and microstructures of Al-Mg-Mn-Sc-Zr alloy during dynamic stretching deformation
Source abstract
Abstract
Abstract Metal materials usually show better mechanical properties during dynamic deformation. Al-Mg-Mn-Sc-Zr alloy is taken as the object in this research and the dynamic stretching behaviors are studied at a wide range of strain rate (0.001 s−1–800 s−1). This research finds that the peak stress and elongation of Al-Mg-Mn-Sc-Zr alloy exhibit significant increasing tends as the strain rates increase. The alloy’s work hardening ability is also improved. During dynamic stretching processes, the deformation time is short and there is not enough time for dislocations to undergo annihilation and rearrangement processes. The dynamic recovery process is severely inhibited, which not only retains the higher density of dislocations, but also improves the uniformity of dislocation distributions. As the strain rate increases, the movement velocity of the dislocations also increase, resulting in a decrease in the width of the dislocations. The increase on the dislocation density and the decrease on the width of the dislocations increase the resistance to the movement of the dislocations. As a result, the peak strength enhances significantly. Dislocation with high movement velocity can cut through Al3(Sc,Zr) particles when the strain rate exceed 500 s−1. Consequently, the formation of dislocation tangles is inhibited, leading to the reduction of flow localization areas and improvement of the uniformity of dislocation distributions. The improvement of dislocation distribution uniformity improves the plasticity of the alloy during dynamic deformation significantly.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Achenbach · 1973
2. Kinematic generation of dislocations10.1080/09500839508242458 ↗
3. The effect of varying strain rates and stress states on the plasticity, damage, and fracture of aluminum alloys10.1016/j.mechmat.2010.07.003 ↗
4. Effects of strain rates on mechanical properties and fracture mechanism of DP780 dual phase steel10.1007/s11665-015-1495-0 ↗
5. Tensile characterization and constitutive modeling of AZ31B magnesium alloy sheet over wide range of strain rates and temperatures10.1016/j.jmatprotec.2010.09.010 ↗
6. Strain rate sensitivity of the commercial aluminum alloy AA5182-O10.1016/j.msea.2004.08.029 ↗
7. Negative to positive strain rate sensitivity in 5xxx series aluminum alloys: experiment and constitutive modeling10.1016/j.ijplas.2013.11.001 ↗
8. Thermo-viscoplastic constitutive relation for aluminium alloys, modeling of negative strain rate sensitivity and viscous drag effects10.1016/j.matdes.2009.04.011 ↗
9. High strain rate properties of selected aluminium alloys10.1016/S0921-5093(99)00570-5 ↗
10. Strengthening mechanisms in an Al–Mg alloy10.1016/j.msea.2009.11.056 ↗
11. Effect of dynamic plastic deformation on the microstructure and mechanical properties of an Al–Zn–Mg alloy10.1016/j.msea.2020.139287 ↗
12. Defect strucetures introduced in FCC mateals by high-speed deformation10.1080/10420150211397 ↗
13. Effects of strain rate on dynamic mechanical behavior and microstructure evolution of 5A02-O aluminum alloy10.1016/j.msea.2014.03.081 ↗
14. Effects of strain rate on mechanical properties and failure mechanism of structural Al–Mg alloys10.1016/j.msea.2008.03.037 ↗
15. Superplastic deformation mechanisms of an Al–Mg–Li alloy with banded microstructures10.1016/j.msea.2020.140545 ↗
16. Effect of cooling environment and welding speed on fatigue properties of friction stir welded Al-Mg-Cr alloy10.1016/j.ijfatigue.2019.06.043 ↗
17. Influence of heat treatment on corrosion behavior of rare earth element Sc modified Al-Mg alloy processed by selective laser melting10.1016/j.apsusc.2020.145330 ↗
18. Effect of hydrogen content in ER5183 welding wire on the tensile strength and fracture morphology of Al–Mg MIG weld10.1016/j.vacuum.2019.05.011 ↗
19. Stress–strain behaviour of aluminium alloys at a wide range of strain rates10.1016/j.ijsolstr.2009.07.013 ↗
20. High ductility and strong work-hardening behavior of Zn modified as-hot-rolled Al–Mg sheets
21. G. Ribárik, Modeling of Diffraction Patterns Based on Microstructural Properties, Material Science and Solid State Physics Program, Eötvös Loránd University Institute of Physics Department of Materials Physics, 2008.
22. MWP-fit: a program for multiple whole-profile fitting of diffraction peak profiles by ab initio theoretical functions10.1107/S0021889801011451 ↗
23. Crystallite size distribution and dislocation structure determined by diffraction profile analysis: principles and practical application to cubic and hexagonal crystals10.1107/S0021889801003715 ↗
24. The contrast factors of dislocations in cubic crystals: the dislocation model of strain anisotropy in practice10.1107/S0021889899009334 ↗
25. The effect of cooling rate on the morphology of primary Al3Sc intermetallic particles in Al–Sc alloys10.1016/S1359-6454(01)00050-7 ↗
26. Precipitation of Al3Sc in binary Al–Sc alloys10.1016/S0921-5093(01)01326-0 ↗
27. Orientation gradients and geometrically necessary dislocations in ultrafine grained dual phase steels studied by 2D and 3D EBSD10.1016/j.msea.2010.01.004 ↗
28. Effects of aging on precipitation behavior and mechanical properties of a tensile deformed Al–Cu alloy10.1016/j.jallcom.2020.155975 ↗
29. Deformation behavior and precipitation features in a stretched Al–Cu Alloy at intermediate temperatures10.3390/ma13112495 ↗
30. Physics of strengthening mechanics in crystalline solids10.1146/annurev.ms.01.080171.001525 ↗
31. Fifty-year study of the Peierls-Nabarro stress10.1016/S0921-5093(97)00184-6 ↗
32. Frost · 1982 · 26
33. Microstructure and mechanical properties of severely deformed Al-Mg-Sc-Zr alloy and their evolution during annealing10.1016/j.msea.2018.12.063 ↗
34. Precipitation of Al3(Sc,Zr) particles in an Al–Zn–Mg–Cu–Sc–Zr alloy during conventional solution heat treatment and its effect on tensile properties10.1016/j.actamat.2008.04.005 ↗
35. Influence of stacking-fault energy on microstructural characteristics of ultrafine-grain copper and copper–zinc alloys10.1016/j.actamat.2007.10.053 ↗
36. M.A. Meyers, K.K. Chawla, Mechanical Metallurgy: Principles and Applications, Paramus, NJ: Englewood Cliffs,1984.
37. Behaviour of Al-Mg-Si alloys at a wide range of temperatures and strain rates10.1016/j.ijimpeng.2015.08.008 ↗
38. Kinetics of flow and strain-hardening10.1016/0001-6160(81)90112-7 ↗
39. Effects of homogenization on precipitation of Al3(Er,Zr) particles and recrystallization behavior in a new type Al-Zn-Mg-Er-Zr alloy10.1016/j.msea.2017.02.071 ↗