journal article·2021-12

Watermelon-like texture lithium titanate and silicon composite films as anodes for lithium-ion battery with high capacity and long cycle life

Kun Wei, Lihang Zhou, Shen Wang, Jiuxing Wei, Dongliang Yan, Yan Cheng, Zhaozhe Yu

Publisher page

Abstract

Abstract Buffering the volume expansion of Si particles is considered to be an effective method for preparing Si based electrode with high capacity and prominent cycling performance. Here, watermelon-like texture Li4Ti5O12 (LTO) and Si composite film electrode was synthetized by magnetron co-sputtering using spinel LTO powder and crystalline Si wafer as the sputtering source. In the composite film electrode, LTO acts as watermelon pulp and Si acts as watermelon seed. The obtained composite film electrode endows a high reversible capacity of ~800 mAh g−1 at 100 mA g−1 with a capacity retention ~76% after 1000 cycles. The extraordinary electrochemical characteristics of the composite film electrode could be attributed to the role of LTO in watermelon pulp which prevents electrolyte from contacting with Si nanoparticles directly, easing the stress caused by periodic volume change and the multi-interface between LTO and Si as well as supplying efficient and rapid transport routes for Li-ions. The outcomes reveal the watermelon-like texture composite film is a promising high energy density and splendid long cycle stability anode material for lithium-ion batteries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Building better batteries10.1038/451652a ↗
2. New insight into the atomic-scale bulk and surface structure evolution of Li4Ti5O12 anode10.1021/ja5115562 ↗
3. 30 years of lithium-ion batteries
4. Direct atomic-scale confirmation of three-phase storage mechanism in Li₄Ti₅O₁₂ anodes for room-temperature sodium-ion batteries10.1038/ncomms2878 ↗
5. Lithium titanate hydrates with superfast and stable cycling in lithium-ion batteries10.1038/s41467-017-00574-9 ↗
6. Zero‐strain insertion material of Li [Li1/3Ti5/3] O4 for rechargeable lithium cells10.1149/1.2048592 ↗
7. Ti-based compounds as anode materials for Li-ion batteries10.1039/c2ee03410g ↗
8. Flame aerosol deposited Li4Ti5O12 layers for flexible, thin film all-solid-state Li-ion batteries10.1016/j.nanoen.2018.05.007 ↗
9. Annealing-regulated elimination of residual strain-induced structural relaxation for stable high-power Li4Ti5O12 nanosheet anodes10.1016/j.nanoen.2016.12.063 ↗
10. Lithium migration in Li4Ti5O12 studied using in situ neutron powder diffraction10.1021/cm5002779 ↗
11. nanocoating for a high-rate Li4Ti5O12 anode of a lithium-ion battery10.1021/ja301266w ↗
12. The configurational space of rocksalt-type oxides for high-capacity lithium battery electrodes10.1002/aenm.201400478 ↗
13. Challenges of spinel Li4Ti5O12 for lithium-ion battery industrial applications10.1002/aenm.201601625 ↗
14. Ab initio studies on Li4+xTi5O12 compounds as anode materials for lithium-ion batteries10.1002/cphc.200800333 ↗
15. Electrochemical performance and lithium-ion intercalation kinetics of submicron-sized Li4Ti5O12 anode material10.1016/j.jallcom.2012.08.113 ↗
16. High rate Li4Ti5O12-Fe2O3 and Li4Ti5O12-CuO composite anodes for advanced lithium-ion batteries10.1016/j.jallcom.2014.03.085 ↗
17. Low-cost and environmentally friendly synthesis of an Al3+ and Mn4+ co-doped Li4Ti5O12 composite with carbon quantum dots as an anode for lithium-ion batteries10.1039/C9RA03897C ↗
18. Self-supported hierarchical porous Li4Ti5O12/carbon arrays for boosted lithium-ion storage10.1016/j.jechem.2020.06.017 ↗
19. Self-supported lithium titanium oxide nanosheet arrays decorated with molybdenum disulfide for high-performance lithium-ion batteries10.1002/ente.201600187 ↗
20. Graphene supported Li2SiO3/Li4Ti5O12 nanocomposites with improved electrochemical performance as anode material for lithium-ion batteries10.1016/j.apsusc.2017.01.221 ↗
21. Binder-free flexible Li2ZnTi3O8@MWCNTs stereoscopic network as lightweight and superior rate performance anode for lithium-ion batteries10.1016/j.jallcom.2019.152580 ↗
22. Stable high-capacity and high-rate silicon-based lithium battery anodes upon two-dimensional covalent encapsulation
23. Shell-protective secondary silicon nanostructures as pressure-resistant high-volumetric-capacity anodes for lithium-ion batteries10.1021/acs.nanolett.8b03065 ↗
24. Enhanced cycling performance of Si-MXene nanohybrids as anode for high performance lithium-ion batteries10.1016/j.cej.2019.122212 ↗
25. Porous graphene current collectors filled with silicon as high-performance lithium battery anode10.1088/2053-1591/aaa0f9 ↗
26. Composites of silicon@Li4Ti5O12 and graphite for high-capacity lithium-ion battery anode materials10.1149/1945-7111/abda05 ↗
27. Facile preparation of core-shell Si@Li4Ti5O12 nanocomposite as large-capacity lithium-ion battery anode10.1016/j.jechem.2019.02.011 ↗
28. Constructing inorganic/polymer microsphere composite as lithium-ion battery anode material10.1016/j.apsusc.2017.10.125 ↗
29. Lithium storage in Li4Ti5O12 spinel: The full static picture from electron microscopy10.1002/adma.201200450 ↗
30. Binary lithium titanate-titania nanocomposite thin-film Electrodes for electrochemical energy storage10.1002/ente.201600035 ↗
31. Engineered nanomembranes for smart energy storage devices10.1039/C5CS00708A ↗
32. Lithium titanium oxynitride thin film with enhanced lithium storage and rate capability10.1016/j.apsusc.2016.01.284 ↗
33. Evolution of microstructure and mechanical properties of Co-SiC tungsten inert gas cladded coating on 304 stainless steel
34. Structural and thermodynamic stability of Li4Ti5O12 anode material for lithium-ion battery10.1016/j.jpowsour.2012.09.020 ↗
35. Hydrogenated Li4Ti5O12 nanowire arrays for high-rate lithium-ion batteries10.1002/adma.201203151 ↗
36. Towards a fundamental understanding of the improved electrochemical performance of silicon-carbon composites10.1002/adfm.200600937 ↗
37. Single-atom catalysts boost nitrogen electroreduction reaction10.1016/j.mattod.2020.03.022 ↗
38. Electrostatic assembly of sandwich-like Ag-C@ZnO-C@Ag-C hybrid hollow microspheres with excellent high-rate lithium storage properties10.1021/acsnano.5b06650 ↗
39. High‐Performance and ultra-stable lithium-ion batteries based on MOF-derived ZnO@ZnO quantum Dots/C core–shell nanorod arrays on a carbon cloth anode10.1002/adma.201405222 ↗
40. Stable nanostructured cathode with polycrystalline Li-deficient Li0.28Co0.29Ni0.30Mn0.20O2 for lithium-ion batteries10.1021/nl404215h ↗
41. Binary Li4Ti5O12-Li2Ti3O7 nanocomposite as an anode material for Li-ion batteries10.1002/adfm.201201741 ↗
42. Hierarchical Co9S8@carbon hollow microspheres as an anode for sodium ion batteries with ultralong cycling stability10.1021/acssuschemeng.8b06345 ↗
43. High interfacial charge storage capability of carbonaceous cathodes for Mg batteries10.1021/acsnano.8b00753 ↗
44. Array of nanosheets render ultrafast and high-capacity Na-ion storage by tunable pseudocapacitance10.1038/ncomms12122 ↗
45. To be or not to be pseudocapacitive?10.1149/2.0201505jes ↗
46. In-situ rooting ZnSe/N-doped hollow carbon architectures as high-rate and long-life anode materials for half/full sodium-ion and potassium-ion batteries10.1016/j.ensm.2019.05.039 ↗