journal article·2021-12

Effect of particle size on dynamic mechanical behaviors of W particles/Zr-based bulk metallic glass composites

Yan Li, Xingwang Cheng, Guoju Li, Yangwei Wang, Zhaolong Ma

Publisher page

Abstract

Abstract The effect of particle size on the dynamic mechanical behavior of W particle /Zr-based bulk metallic glass composites (Wp/BMGCs) was investigated by split Hopkinson pressure bar (SHPB) and finite element method (FEM). The yield strength decreases with the increase of W particles size under quasi-static compression, while the fracture strain increases. The BMGC with 60% Wp shows the highest fracture strain, and the BMG matrix shows a uniform rheological characteristic which is different from the brittle fracture characteristic. Under dynamic compression, the yield strength of the BMGCs does not show obvious strain rate sensitivity, and the dynamic fracture strain is significantly lower than the quasi-static fracture strain. With the increase of the W particles size, the cladding on the BMG matrix weakened, and the fracture mode changed from fragmentation to shear fracture. We consider that the combination of interface debonding and cleavage fracture was the very reason for the changed fracture mode. It is found that the Ansys/LS-DYNA code is able to predict the response of the Wp/BMGCs in the element mesh if special care is taken, and good agreement is in general obtained between the numerical simulations and experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Mechanical properties of bulk metallic glasses10.1016/j.pmatsci.2010.04.002 ↗
2. The fracture of bulk metallic glasses10.1016/j.pmatsci.2015.05.002 ↗
3. Shear bands in metallic glasses10.1016/j.mser.2013.04.001 ↗
4. Compressive mechanical properties of W-particle/Zr-based amorphous alloy composites10.1088/2053-1591/ab2025 ↗
5. Bulk metallic glass matrix composites10.1063/1.120512 ↗
6. Synthesis and properties of tungsten balls/Zr-base metallic glass composite10.1016/j.msea.2012.01.127 ↗
7. Synthesis and characteristics of 80vol% tungsten (W) fibre/Zr based metallic glass composite10.1016/j.intermet.2009.05.011 ↗
8. Crystallization kinetics of 50% W particles/Zr41.2Ti13.8Cu12.5Ni10Be22.5 metallic glass matrix composite10.3390/met8121011 ↗
9. Effect of W volume fraction on dynamic mechanical behaviors of W fiber/Zr-based bulk metallic glass composites10.1016/j.msea.2015.05.086 ↗
10. Strength-improved Zr-based metallic glass/porous tungsten phase composite by hydrostatic extrusion10.1063/1.2456618 ↗
11. Dynamic compressive deformation and failure behavior of Zr-based metallic glass reinforced porous tungsten composite10.1016/j.msea.2006.09.025 ↗
12. Quasi-static compressive property of metallic glass/porous tungsten bi-continuous phase composite10.1557/jmr.2006.0166 ↗
13. Mechanically alloyed tungsten carbide particle/Ti50Cu28Ni15Sn7 glassy alloy matrix composites10.1016/j.msea.2006.02.305 ↗
14. Development of W-reinforced Zr-based metallic glass10.2320/matertrans.ME200829 ↗
15. Multi-scale crystal plasticity finite element simulations of the microstructural evolution and formation mechanism of adiabatic shear bands in dual-phase Ti20C alloy under complex dynamic loading10.1016/j.jmst.2020.03.079 ↗
16. Effect of the metallic glass volume fraction on the mechanical properties of Zr-based metallic glass reinforced with porous W composite10.1016/j.msea.2012.10.054 ↗
17. Densification and strain hardening of a metallic glass under tension at room temperature10.1103/PhysRevLett.111.135504 ↗
18. A microscopic mechanism for steady-state inhomogeneous flow in metallic glasses10.1016/0001-6160(77)90232-2 ↗
19. Strain-hardening and suppression of shear-banding in rejuvenated bulk metallic glass10.1038/s41586-020-2016-3 ↗
20. Extreme rejuvenation and softening in a bulk metallic glass10.1038/s41467-018-02943-4 ↗
21. Ductile fracture in notched bulk metallic glasses10.1016/j.actamat.2017.06.048 ↗
22. Origin of anomalous inverse notch effect in bulk metallic glasses10.1016/j.jmps.2015.07.006 ↗
23. Effect of temperature on the fracture surface morphology of Ti- and Zr-based bulk metallic glasses: exploring correlation between morphology and plasticity10.1007/s10853-018-2284-6 ↗
24. Tungsten particulate rreinforced zr based bulk metallic glass composites