Effects of cryogenic treatments on phase transformations, microstructure and mechanical properties of near βTi alloy
Source abstract
Abstract
Abstract The influences of cryogenic treatments, i.e. liquid nitrogen quenching (LNQ) and water quenching followed with liquid nitrogen immersion (WQ-L) on phase transformations, microstructural development and mechanical properties during aging treatment have been studied in near βTi-5Al-3Mo-3V-2Cr-2Zr-1Nb-1Fe alloy. The results showed that cryogenic treatments produced more O′ and ω-embryos in comparison with water quenching (WQ). After aging treatment, the LNQ sample and WQ-L sample formed finer and higher number density of α precipitates within β grains, which is attributed to the increase of O′ domains provides more potent nucleation sites for α. Tensile tests indicated that the cryogenic treatments improved tensile strength without trading-off ductility obviously. The ultimate tensile strength of aged LNQ and WQ-L sample was increased by 142 MPa and 62 MPa, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Lutjering · 2007
2. Perspectives on titanium science and technology10.1016/j.actamat.2012.10.043 ↗
3. Studies on single and duplex aging of metastable beta titanium alloy Ti-15V–3Cr-3Al-3Sn10.1016/j.jallcom.2014.03.183 ↗
4. Tuning the scale of α precipitates in β-titanium alloys for achieving high strength10.1016/j.scriptamat.2018.05.040 ↗
5. Activation of homogeneous precursors for formation of uniform and refined α precipitates in a high-strength β-Ti alloy10.1016/j.mtla.2019.100557 ↗
6. A comparative study of the mechanical properties of high-strength β-titanium alloys10.1016/j.jallcom.2007.03.070 ↗
7. Role of ω phase in the formation of extremely refined intragranular α precipitates in metastable β titanium alloys10.1016/j.actamat.2015.11.020 ↗
8. Influence of phase transformation kinetics on the formation of a in a β-quenched Ti-5Al-5Mo-5V–3Cr-1Zr alloy10.1016/j.actamat.2015.05.008 ↗
9. Microstructure evolution in metastable β titanium alloy subjected to deep cryogenic treatment10.1016/j.msea.2018.03.003 ↗
10. A review on heat treatment efficiency in metastable β titanium alloys: the role of treatment process and parameters10.1016/j.jmrt.2020.10.088 ↗
11. Phase transformation kinetics of Ti-1300 alloy during continuous heating10.1007/s12598-015-0472-y ↗
12. Martensitic transformation of Ti-18Nb(at%) alloy with zirconium10.1007/s12598-012-0496-5 ↗
13. Popovici, mechanical properties of a gum-type Ti-Nb-Zr-Fe-O alloy10.1007/s12613-017-1477-3 ↗
14. Tracking the α″ martensite decomposition during continuous heating of a Ti-6Al-6V–2Sn alloy10.1016/j.actamat.2017.06.018 ↗
15. Heating-induced martensitic transformation and time-dependent shape memory behavior of Ti–Nb–O alloy10.1016/j.actamat.2014.07.012 ↗
16. Lattice modulation and superelasticity in oxygen-added β-Ti alloys10.1016/j.actamat.2011.06.015 ↗
17. Shuffle-nanodomain regulated strain glass transition in Ti-24Nb-4Zr-8Sn Alloy10.1016/j.actamat.2019.12.056 ↗
18. The dependence of isothermal ω precipitation on the quenching rate in a metastable β-Ti alloy10.1038/srep14632 ↗
19. Composition of the nanosized orthorhombic O′ phase and its direct transformation to fine α during ageing in metastable β-Ti alloys10.1016/j.scriptamat.2019.06.008 ↗
20. Experimental and DFT characterization of interphase boundaries in titanium and the implications for ω-assisted α phase precipitation10.1016/j.actamat.2018.03.056 ↗
21. ω-Assisted nucleation and growth of α precipitates in the Ti-5553 β titanium alloy10.1016/j.actamat.2009.01.007 ↗
22. Microstructural tailoring and mechanical properties of a multi-alloyed near β titanium alloy Ti-5321 with various heat treatment10.1016/j.msea.2017.11.029 ↗
23. The origin of striation in the metastable β phase of titanium alloys observed by transmission electron microscopy10.1107/S1600576717004150 ↗
24. Formation of intermediate phases and their influences on the microstructure of high strength near-β titanium alloy10.1016/j.msea.2020.139886 ↗
25. New insights into the phase transformations to isothermal ω and ω-assisted α in near β-Ti alloys
26. Giant thermal expansion and α-precipitation pathways in Ti-alloys10.1038/s41467-017-01578-1 ↗
27. Role of nanosized intermediate phases on α precipitation in a high-strength near β titanium alloy10.1016/j.matlet.2020.128147 ↗
28. Role of oxygen atoms in α″ martensite of Ti-20Nb at% alloy10.1016/j.scriptamat.2015.08.033 ↗