Microstructures and mechanical properties of nano-C and in situ Al2O3 reinforced aluminium matrix composites processed by equal-channel angular pressing
Source abstract
Abstract
Abstract In this study, the powder metallurgy method was used to prepare nano-C and in situ Al2O3 hybrid reinforced Al matrix composites, the grain size was refined, and the dispersion of reinforcements was improved by equal-channel angular pressing (ECAP). Twin Si and slip steps were present in the composites reinforced by 0.75% carbon nanotubes (CNTs), 0.25% graphene nanoplatelets (GNPs), and Al2O3 by three ECAP passes. The interface between the CNTs and the matrix was closely bonded. The γ-Al2O3 particles and fibres were generated by an in situ method, and the nucleation and interfacial orientation of Al2O3 were discussed. With the increase in ECAP passes, the electrical and mechanical properties of the composites were improved. The electrical resistivity of the composites reinforced with 0.5% GNPs after three ECAP passes showed the lowest value of 3.64 × 10−8 Ωm. The maximum hardness of the composites reinforced with 1.0% CNTs after three ECAP passes was 321.9 HV. The compressive strengths of the composites improved. The strengthening mechanism of the ECAP-treated Al matrix composites was summarised as dislocation strengthening, dispersion strengthening, grain boundary strengthening, and load transfer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Microstructure and mechanical properties of carbon nanotubes reinforced aluminum matrix composites synthesized via equal-channel angular pressing10.1016/j.msea.2016.06.027 ↗
2. In situ fabrication and microstructure of Al2O3 particles reinforced aluminum matrix composites10.1016/j.msea.2010.01.022 ↗
3. Tensile properties of nanometric Al2O3 particulate-reinforced aluminum matrix composites10.1016/j.matchemphys.2004.02.002 ↗
4. Enhanced performance of nano-sized SiC reinforced Al metal matrix nanocomposites synthesized through microwave sintering and hot extrusion techniques10.1016/j.pnsc.2017.08.015 ↗
5. Processing and properties of magnesium containing a dense uniform dispersion of nanoparticles10.1038/nature16445 ↗
6. Property characteristics of a AlNp/Al composite fabricated by squeeze casting technology10.1016/S0167-577X(02)01006-6 ↗
7. Enhanced mechanical and microwave absorption properties of SiCf/SiC composite using aluminum powder as active filler10.1016/j.jallcom.2019.03.171 ↗
8. Experimental investigation on machinability of in situ formed TiB2 particles reinforced Al MMCs10.1016/j.jmapro.2016.05.004 ↗
9. Sivaprasad, Influence of turning parameters on the machinability of homogenized Al–Cu/TiB2 in situ metal matrix composites10.1007/s00170-012-4592-3 ↗
10. Effectively enhanced load transfer by interfacial reactions in multi-walled carbon nanotube reinforced Al matrix composites10.1016/j.actamat.2016.12.022 ↗
11. Length effect of carbon nanotubes on the strengthening mechanisms in metal matrix composites10.1016/j.actamat.2017.08.048 ↗
12. An approach to obtaining homogeneously dispersed carbon nanotubes in Al powders for preparing reinforced Al-matrix composites10.1002/adma.200601381 ↗
13. Toughened and machinable glass matrix composites reinforced with graphene and graphene-oxide nano platelets10.1088/1468-6996/14/5/055007 ↗
14. Graphene reinforced metal and ceramic matrix composites: a review10.1080/09506608.2016.1219481 ↗
15. Enhanced mechanical properties of graphene (reduced graphene oxide)/aluminum composites with a bioinspired nanolaminated structure10.1021/acs.nanolett.5b03492 ↗
16. A novel strengthening effect of in-situ nano Al2O3w on CNTs reinforced aluminum matrix nanocomposites and the matched strengthening mechanisms10.1016/j.jallcom.2018.06.006 ↗
17. Effects of carbon nanotube content and annealing temperature on the hardness of CNT reinforced aluminum nanocomposites processed by the high pressure torsion technique10.1016/j.jallcom.2014.05.219 ↗
18. Improving the mechanical properties of carbon nanotubes reinforced pure aluminum matrix composites by achieving non-equilibrium interface10.1016/j.matdes.2017.01.096 ↗
19. Dislocation-based strengthening mechanisms in metal-matrix nanocomposites: a molecular dynamics study of the influence of reinforcement shape in the Al-Si system10.1016/j.commatsci.2017.12.063 ↗
20. Extraordinary reinforcing effect of carbon nanotubes in aluminium matrix composites assisted by in-situ alumina nanoparticles10.1016/j.compositesb.2019.107691 ↗
21. Consolidation of carbon nanotube reinforced aluminum matrix composites by high-pressure torsion10.1007/s11661-014-2354-6 ↗
22. Production of aluminum-matrix carbon nanotube composite using high pressure torsion10.1016/j.msea.2008.02.022 ↗
23. Microstructure and mechanical properties of Al/graphene composite produced by high-pressure torsion10.1002/adem.201400375 ↗
24. ECAP consolidation of Al matrix composites reinforced with in-situ γ-Al2O3 nanoparticles10.1016/j.msea.2015.09.025 ↗
25. Compressive, shear, and fracture behavior of CNT reinforced Al matrix composites manufactured by severe plastic deformation10.1016/j.matdes.2016.05.109 ↗
26. Effects of cyclic extrusion and compression on the microstructure and mechanical properties of AZ91D magnesium composites reinforced by SiC nanoparticles10.1016/j.matchar.2017.01.008 ↗
27. Microstructural refinement and homogenization of Mg–SiC nanocomposites by cyclic extrusion compression10.1016/j.msea.2012.06.086 ↗
28. On the achievement of uniform particle distribution in metal matrix composites fabricated by accumulative roll bonding10.1016/j.matlet.2012.09.043 ↗
29. Manufacturing of high-strength aluminum/alumina composite by accumulative roll bonding10.1016/j.msea.2010.03.070 ↗
30. Investigating the microstructure and mechanical properties of aluminum-matrix reinforced-graphene nanosheet composites fabricated by mechanical milling and equal-channel angular pressing10.3390/nano9081070 ↗
31. Microstructures and mechanical properties of Al-Si alloy nanocomposites hybrid reinforced with nano-carbon and in-situ Al2O310.1016/j.jallcom.2019.06.030 ↗
32. The synthesis and characterization of copper-based metal–organic framework/graphite oxide composites10.1016/j.carbon.2010.09.059 ↗
33. Fabrication of Al alloy matrix composite reinforced with subsive-sized Al2O3 particles by the in situ displacement reaction using high-energy ball-milled powder10.1016/j.msea.2006.02.402 ↗
34. Low-temperature solid-state dissolution of carbon atoms into aluminum nanoparticles10.1016/j.scriptamat.2011.09.031 ↗
35. Refining SiCp in reinforced Al–SiC composites using equal-channel angular pressing10.1016/j.matdes.2014.07.045 ↗
36. Effect of fine-grained structural Al–12%Si materials on morphologies and crystal defects of eutectic Si in HCC Al–12%Si alloy billets10.1016/j.jallcom.2012.05.030 ↗
37. In situ synthesis of a gamma-Al2O3 whisker reinforced aluminium matrix composite by cold pressing and sintering10.1016/j.msea.2017.10.063 ↗
38. The fabrication of graphene-reinforced Al-based nanocomposites using high-pressure torsion10.1016/j.actamat.2018.10.060 ↗
39. Effect of heat treatment on interfacial bonding and strengthening efficiency of graphene in GNP/Al composites10.1016/j.compositesa.2019.04.010 ↗
40. Preparation and tensile properties of homogeneously dispersed graphene reinforced aluminum matrix composites10.1016/j.matdes.2016.01.034 ↗
41. Energy of slip transmission and nucleation at grain boundaries10.1016/j.actamat.2010.09.032 ↗
42. Grain boundary misorientation dependence of β phase precipitation in an Al–Mg alloy10.1016/j.scriptamat.2014.01.003 ↗
43. Effect of strain-induced precipitation on the low angle grain boundary in AA7050 aluminum alloy10.1016/j.matdes.2011.04.025 ↗
44. Effect of in situ γ-Al2O3 particles on the microstructure of hypereutectic Al–20%Si alloy10.1016/j.jallcom.2013.04.043 ↗
45. Effect of P and Sr complex modification on Si phase in hypereutectic Al–30Si alloys10.1016/j.matdes.2012.12.054 ↗
46. Microstructure and mechanical property of multi-walled carbon nanotubes reinforced aluminum matrix composites fabricated by friction stir processing10.1016/j.matdes.2012.08.036 ↗
47. Carbon nanotube reinforced metal matrix composites – a review10.1179/095066009X12572530170543 ↗
48. Shear deformation with imposed hydrostatic pressure for enhanced compaction of powder10.1016/j.scriptamat.2008.01.010 ↗
49. Cu matrix composites reinforced with aligned carbon nanotubes: mechanical, electrical and thermal properties10.1016/j.msea.2016.08.044 ↗
50. Effect of sintering temperature on properties of CNT/Al composite prepared by capsule-free hot isostatic pressing technique10.1007/s12666-016-0886-8 ↗
51. Consolidation of commercial pure aluminum powder by torsional-equal channel angular pressing (T-ECAP) at room temperature10.1016/j.powtec.2011.11.034 ↗
52. Three-dimensional finite element analysis of torsion extrusion (TE) as an SPD process10.1016/j.msea.2011.08.055 ↗
53. On the relationship between uniaxial yield strength and resolved shear stress in polycrystalline materials10.1016/S0022-3115(00)00378-0 ↗
54. Strengthening mechanisms in carbon nanotube-reinforced aluminum composites10.1016/j.carbon.2015.08.112 ↗
55. Development of a multi-pass facility for equal-channel angular pressing to high total strains10.1016/S0921-5093(99)00744-3 ↗