journal article·2017-08

Empirical modelling and optimization of pre-heat temperature and Ar flow rate using response surface methodology for stoichiometric Sb2Te3 thin films prepared by RF magnetron sputtering

Tanakorn Khumtong, Aparporn Sakulkalavek, Rachsak Sakdanuphab

Publisher page

Abstract

Abstract In this work, a flexible antimony telluride thin film was deposited by RF magnetron sputtering. The response surface methodology based on central composite design was used to study the influence of the Ar flow rate ( A ) and the pre-heat temperature of the substrate ( T ) on the Te content (%Te). The %Te of the thin film tended to increase with an increase in both the Ar flow rate and the pre-heat temperature. Stoichiometric Sb 2 Te 3 thin films were obtained that agreed with the model equation of %Te = 59.22 + 0.070 A - 0.098 T + 5.580 × 10 −4 AT – 7.212 × 10 −4 A 2 + 1.05 × 10 −4 T 2 . Micro-strainand dislocation density were enhanced using high Ar flow rate and low pre-heat temperature. The dislocation density and stoichiometry contributed to the substantially enhanced Seebeck coefficient and electrical conductivity of the films, respectively. The temperature dependence of the power factor is strongly dominated by electrical conductivity, leading to the highest value for a stoichiometric film of 2.0 × 0 −3 W/m.K 2 at 250 °C. During process optimization, several conditions can be prepared by RF magnetron sputtering with an Sb 2 Te 3 target in order to obtain stoichiometric Sb 2 Te 3 films. However, the expected condition to obtain highest power factor was the highest Ar gas flow rate and the lowest pre-heat temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Advanced Semiconductor Detectors and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Optimization of thermoelectric properties on Bi2Te3 thin films deposited by thermal co-evaporation10.1016/j.tsf.2009.08.038 ↗
2. Thermoelectric properties of n-type Bi–Te thin films with deposition conditions using RF magnetron co-sputtering10.1016/j.tca.2012.01.003 ↗
3. Electrochemical deposition of Bi2Te3-based thin films10.1016/j.jpcs.2010.03.020 ↗
4. Flexible screen printed thermoelectric generator with enhanced processes and materials10.1016/j.sna.2015.12.016 ↗
5. Printed flexible thermoelectric generators for use on low levels of waste heat10.1016/j.apenergy.2015.07.066 ↗
6. Room temperature MBE deposition of Bi2Te3 and Sb2Te3 thin films with low charge carrier densities10.1002/pssa.201127440 ↗
7. Structural, optical and electrical properties of Sb2Te3 films prepared by pulsed laser deposition10.1016/j.jcrysgro.2015.01.022 ↗
8. Thermoelectric characterization of ion beam sputtered Sb2Te3 thin films10.1016/j.jallcom.2010.06.046 ↗
9. Effects of annealing on thermoelectric properties of Sb2Te3 thin films prepared by radio frequency magnetron sputtering10.1007/s10854-012-0888-1 ↗
10. Annealing effects on the structural and electrical transport properties of n-type Bi2Te2.7Se0.3 thin films deposited by flash evaporation10.1016/j.apsusc.2010.05.069 ↗
11. Optimization of electrodeposited p-doped Sb2Te3 thermoelectric films by millisecond potentiostatic pulses10.1002/aenm.201100585 ↗
12. Enhanced thermoelectric properties of thermal treated Sb2Te3 thin films10.1016/j.jallcom.2013.08.164 ↗
13. Enhanced thermoelectric properties and layered structure of Sb2Te3 films induced by special (00 l) crystal plane10.1016/j.cplett.2013.08.084 ↗
14. The effect of annealing in controlled vapor pressure on the thermoelectric properties of RF-sputtered Bi2Te3 film10.1007/s11664-012-1938-4 ↗
15. Growth of FeSb2 thin films by magnetron sputtering10.1016/j.tsf.2011.02.053 ↗
16. Analysis of the polymer composite bipolar plate properties on the performance of PEMFC (polymer electrolyte membrane fuel cells) by RSM (response surface methodology)10.1016/j.energy.2013.03.076 ↗
17. Continuous production of biodiesel from waste cooking oil in a reactive distillation column catalyzed by solid heteropolyacid: optimization using response surface methodology (RSM)10.1016/j.fuel.2011.10.018 ↗
18. Optimization of immobilization for selective oxidation of benzyl alcohol by Gluconobacter oxydans using response surface methodology10.1016/j.biortech.2010.07.019 ↗
19. RSM base study of the effect of argon gas flow rate and annealing temperature on the [Bi]:[Te] ratio and thermoelectric properties of flexible Bi-Te thin film10.1007/s11664-016-5024-1 ↗
20. Microstructure and electrical properties of antimony telluride thin films deposited by RF magnetron sputtering on flexible substrate using different sputtering pressures10.1007/s11664-017-5303-5 ↗
21. Fabrication and characterization of Bi0.4Te3.0Sb1.6 thin films by flash evaporation method10.1016/j.jallcom.2006.09.136 ↗
22. Effect of substrate roughness and working pressure on photocatalyst of N-dope TiOx films prepared by reactive sputtering with air10.1016/j.apsusc.2014.10.173 ↗
23. Strain and grain size effects on thermal transport in highly-oriented nanocrystalline bismuth antimony telluride thin films10.1016/j.ijheatmasstransfer.2014.04.048 ↗
24. Nanostructures and defects in thermoelectric AgPb18SbTe20 single crystal10.1063/1.3124364 ↗
25. Strain and size effects on heat transport in nanostructures10.1063/1.1555256 ↗
26. Effect of grain size on thermal transport in post-annealed antimony telluride thin films10.1186/s11671-015-0733-6 ↗
27. Effect of substrate temperature on the optical properties of CaBi4Ti4O15 thin films deposited by pulsed laser ablation10.1007/s10854-016-5189-7 ↗
28. Thermoelectric properties of Bi–Te films with controlled structure and morphology10.1063/1.3147870 ↗
29. Thermoelectric properties of nanostructured bismuth–telluride thin films grown using pulsed laser deposition10.1016/j.jallcom.2014.07.018 ↗
30. A study of the impact of dislocations on the thermoelectric properties of quantum wells in the Si/SiGe materials system10.1063/1.3665127 ↗
31. The influence of the transformation of electronic structure and microstructure on improving the thermoelectric properties of zinc antimonide thin films10.1016/j.intermet.2015.04.012 ↗