Impurity Gettering by Atomic‐Layer‐Deposited Aluminium Oxide Films on Silicon at Contact Firing Temperatures

Aluminium oxide (Al₂O₃) thin films deposited on silicon surfaces, synthesised by plasma‐assisted atomic layer deposition, are recently reported to possess impurity gettering effects for the silicon wafer bulk during annealing at 425 °C, a typical temperature used for activating the surface passivation quality of the Al₂O₃ films. This paper investigates the gettering effects of Al₂O₃ films at higher temperatures of 700–900 °C, which are commonly used for contact firing in silicon solar cell fabrication. Iron is used as a marker impurity in silicon to study the gettering effectiveness. Results show that Al₂O₃ films also generate strong impurity gettering effects at 700–900 °C, through a segregation gettering mechanism. The as‐deposited Al₂O₃ films are found to be more effective at gettering than the 425 °C‐activated Al₂O₃ films, demonstrating gettering processes that are largely limited by the impurity diffusivity in silicon. For both as‐deposited and activated Al₂O₃ films, gettering during high temperature annealing occurs by impurity accumulation at the Al₂O₃/Si interfaces, similar to the gettering action at 425 °C. However, some iron is found to redistribute into the bulk of the Al₂O₃ films after long annealing at a high temperature.