Martensitic transformation and mechanical properties of Ti-Ni-Hf high temperature shape memory alloy with network structure second particles
Source abstract
Abstract
Abstract The redistribution of the second phases in Ti-Ni-Hf alloy was achieved by the hot-pressed sintering of the rapid solidified alloy powders. The second phases distributed mainly at the surface of the original alloy powder other than the grain boundaries, forming a network structure. The second phase was (Ti,Hf)2Ni phase, when the sintering temperatures were not more than 1100 °C. The (Ti,Hf)2Ni and Hf2Ni phases coexisted at the sintering temperature of 1150 °C. Such a change of the second phases in type and distribution led to the variation of the martensitic transformation temperatures. The martensitic transformation temperatures increased slightly when the sintering temperatures increased from 1000 °C to 1100 °C and then decreased when the sintering temperature was 1150 °C.The sintered Ti-Ni-Hf alloys with a network structure formed by the second phases showed the higher compressive strength and the larger recoverable strain, without significantly sacrificing the compressive strain.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. High-temperature shape memory alloys: some recent developments10.1016/j.msea.2003.10.324 ↗
2. High temperature shape memory alloys
3. Two-way shape memory effect of a TiNiHf high temperature shape memory alloy10.1016/j.jallcom.2003.10.020 ↗
4. Tensile shape memory behavior of Ni50.3Ti29.7Hf20 high temperature shape memory alloys10.1016/j.matdes.2016.03.163 ↗
5. Shape memory behavior of high strength NiTiHfPd polycrystalline alloys10.1016/j.actamat.2013.04.039 ↗
6. NiTiHf-based shape memory alloys10.1179/1743284714Y.0000000598 ↗
7. Shape memory properties of the Ti36Ni49Hf15 high temperature shape memory alloy10.1016/S0167-577X(00)00091-4 ↗
8. Physical metallurgy of Ti–Ni-based shape memory alloys10.1016/j.pmatsci.2004.10.001 ↗
9. Structure of martensite in sputter-deposited Ti–Ni thin films containing Guinier–Preston zones10.1016/S1359-6454(01)00204-X ↗
10. Stress-induced martensitic transformation behavior of a Ti–Ni–Hf high temperature shape memory alloy10.1016/S0167-577X(01)00631-0 ↗
11. Microstructure of stress-induced martensite in a Ti–Ni–Hf high temperature shape memory alloy10.1016/S1359-6462(01)01147-2 ↗
12. A method to enhance cyclic reversibility of NiTiHf high temperature shape memory alloys10.1016/j.scriptamat.2006.02.029 ↗
13. Shape memory behavior of high strength NiTiHfPd polycrystalline alloys10.1016/j.actamat.2013.04.039 ↗
14. Cold workability and shape memory properties of novel Ti–Ni–Hf–Nb high-temperature shape memory alloys10.1016/j.scriptamat.2011.07.049 ↗
15. The effect of aluminum additions on the thermal, microstructural, and mechanical behavior of NiTiHf shape memory alloys10.1016/j.jallcom.2015.01.071 ↗
16. Martensitic transformation behaviors and mechanical properties of (Ti36Ni49Hf15)100-xYx high temperature shape memory alloys10.1016/j.jallcom.2017.02.137 ↗
17. Influence of Zr content on phase formation, transition and mechanical behavior of Ni-Ti-Hf-Zr high temperature shape memory alloys10.1016/j.jallcom.2016.09.023 ↗
18. Microstructure and transformation related behaviors of a Ni45.3Ti29.7Hf20Cu5 high temperature shape memory alloy10.1016/j.msea.2014.12.111 ↗
19. Effect of aging on the phase transformation and mechanical behavior of Ti36Ni49Hf15, high temperature shape memory alloy10.1016/S1359-6462(99)00347-4 ↗
20. Effect of composition on the amount of second phase and transformation temperatures of NixTi90−xHf10 shape memory alloys10.1016/S0921-5093(99)00303-2 ↗
21. Ni49.8Ti42.2Hf8 shape memory alloy strips production by the twin roll casting technique10.1016/S0921-5093(02)00548-8 ↗
22. Martensite structure in Ti–Ni–Hf–Cu quaternary alloy ribbons containing (Ti,Hf)2Ni precipitates10.1016/j.actamat.2010.03.015 ↗
23. Effects of sintering parameters on the microstructure and tensile properties of in situ, TiBw/Ti6Al4V composites with a novel network architecture10.1016/j.matdes.2011.02.023 ↗
24. Effects of volume fraction on the microstructure and tensile properties of in situ, TiBw/Ti6Al4V composites with novel network microstructure10.1016/j.matdes.2012.09.043 ↗
25. Tailoring a novel network reinforcement architecture exploiting superior tensile properties of in situ, TiBw/Ti composites10.1016/j.msea.2012.03.019 ↗
26. Fabrication, characterization and tensile property of a novel Ti2Ni/TiNi micro-laminated composite10.1016/j.matdes.2015.12.014 ↗
27. Structure analysis of a precipitate phase in an Ni-rich high-temperature NiTiHf shape memory alloy10.1016/j.actamat.2013.02.023 ↗
28. Characterization of the microstructure and mechanical properties of a 50.3Ni–29.7Ti–20Hf shape memory alloy10.1016/j.scriptamat.2012.03.036 ↗
29. Microstructure–property relationships in a high-strength 51Ni–29Ti–20Hf shape memory alloy10.1007/s10853-015-9400-7 ↗
30. Ti-TiNi-HfNi-Hf Liquidus surface10.1007/s11106-007-0086-5 ↗
31. Age-induced multi-stage transformation in a Ni-rich NiTiHf alloy10.1016/j.actamat.2013.01.037 ↗
32. High temperature oxidation behavior of Ti–Ni–Hf shape memory alloy10.1016/j.tca.2014.02.016 ↗
33. Cu content and annealing temperature dependence of martensitic transformation of Ti36Ni49− xHf15Cux melt spun ribbons10.1016/j.intermet.2009.05.010 ↗
34. Microstructure and martensitic transformation characteristics of gas-atomized Ti–Ni–Cu powders10.1016/j.jallcom.2012.02.041 ↗
35. Tensile behavior of Ti36Ni49Hf15 high temperature shape memory alloy10.1016/S1359-6462(99)00085-8 ↗
36. Phase transformation and shape memory effect of a Cu-Al-Ni-Mn-Nb high temperature shape memory alloy10.1016/j.msea.2016.03.017 ↗