Pulsed electrophoretic deposition of nanographitic flake-nanostructured Co3O4 layers for efficient lithium-ion-battery anode
Source abstract
Abstract
Abstract In spite of the high capacity of Co3O4 nanomaterial to employ in lithium-ion battery anodes, the reduced conductivity and significant volume change of Co3O4 during long cycling of insertion and extraction of Li ions remain a challenge. Utilization of composite materials making use of graphene-based materials together with Co3O4 nanostructures can offer a suitable strategy to address these challenges. Here, a composite material consisting of nanographitic flake and CO3O4 nanoparticles is synthesized by solvothermal reactions. After successive oxidation treatments, two types of electrophoretic deposition processes, namely, direct current and square wave pulse current are used to fabricate binder-free anodes for lithium-ion batteries. Compared to the direct current electrophoretic deposition technique, the pulsed electrophoretic deposition technique with a square wave is found to enhance the efficiency of the fabricated anode. The pulsed electrophoretic deposition technique enables the formation of the anode from smaller agglomerated Co3O4 nanoparticles compared to the anode obtained with the direct current electrophoretic deposition. The selective deposition of less agglomerated Co3O4 nanoparticles results in an excellent rate capability and durability of the anode fabricated by the pulsed electrophoretic deposition (a charge capacity of 780 mAh/g after 50 cycles at 1 A/g with total retention of 89%).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Approaching the capacity limit of lithium cobalt oxide in lithium ion batteries via lanthanum and aluminium doping10.1038/s41560-018-0180-6 ↗
2. Co3O4/nitrogen modified graphene electrode as Li-ion battery anode with high reversible capacity and improved initial cycle performance10.1016/j.nanoen.2013.05.014 ↗
3. Free-standing hierarchically sandwich-type tungsten disulfide nanotubes/graphene anode for lithium-ion batteries10.1021/nl502848z ↗
4. A general method of fabricating flexible spinel-type oxide/reduced graphene oxide nanocomposite aerogels as advanced anodes for lithium-ion batteries10.1021/acsnano.5b00576 ↗
5. High areal capacity Li ion battery anode based on thick mesoporous Co3O4 nanosheet networks10.1016/j.nanoen.2014.02.005 ↗
6. High-rate lithiation-induced reactivation of mesoporous hollow spheres for long-lived lithium-ion batteries10.1038/ncomms5526 ↗
7. Porous Co3O4 nanofibers surface-modified by reduced graphene oxide as a durable, high-rate anode for lithium ion battery10.1016/j.electacta.2017.01.067 ↗
8. Structure-properties relationship in iron oxide-reduced graphene oxide nanostructures for Li-ion batteries10.1002/adfm.201300190 ↗
9. Nanostructured anode materials for lithium-ion batteries: principle, recent progress and future perspectives10.1039/C7TA05283A ↗
10. Metal organic frameworks derived hierarchical hollow NiO/Ni/graphene composites for lithium and sodium storage10.1021/acsnano.5b05041 ↗
11. Iron oxide nanoparticle and graphene nanoribbon composite as an anode material for high-performance Li-ion batteries10.1002/adfm.201303023 ↗
12. Template-based engineering of carbon-doped Co3O4 hollow nanofibers as anode materials for lithium-ion batteries10.1002/adfm.201504695 ↗
13. Graphene anchored with Co3O4 batteries with enhanced reversible10.1021/nn100740x ↗
14. Nanostructured reduced grapheneoxide/Fe2O3 composite as a high-performance anode material for lithium ion batteries10.1021/nn200493r ↗
15. Atomic layer-by-layer Co3O4/graphene composite for high performance lithium-ion batteries10.1002/aenm.201501835 ↗
16. The role of graphene for electrochemical energy storage10.1038/nmat4170 ↗
17. Graphene-containing nanomaterials for lithium-ion batteries10.1002/aenm.201500400 ↗
18. A phosphorene-graphene hybrid material as a high-capacity anode for sodium-ion batteries10.1038/nnano.2015.194 ↗
19. Highly efficient materials assembly via electrophoretic deposition for electrochemical energy conversion and storage devices10.1002/aenm.201502018 ↗
20. Achieving fully reversible conversion in MoO3 for lithium ion batteries by rational introduction of CoMoO410.1021/acsnano.6b05150 ↗
21. General synthesis of complex nanotubes by gradient electrospinning and controlled pyrolysis10.1038/ncomms8402 ↗
22. Graphene-embedded Co3O4 rose-spheres for enhanced performance in lithium ion batteries10.1021/acsami.6b16396 ↗
23. Rectangular Co3O4 with micro-/nanoarchitectures: charge-driven PDDA-assisted synthesis and excellent lithium storage performance10.1039/C5CP05766C ↗
24. Electrochemical energy storage devices for wearable technology: a rationale for materials selection and cell design10.1039/C8CS00237A ↗
25. Applications of graphene electrophoretic deposition10.1021/jp3064917 ↗
26. A review on fundamentals and applications of electrophoretic deposition (EPD)10.1016/j.pmatsci.2006.07.001 ↗
27. Multi layered Si-CuO quantum dots wrapped by graphene for high-performance anode material in lithium-ion battery10.1016/j.carbon.2014.06.022 ↗
28. Binder-free carbon-coated silicon-reduced graphene oxide nanocomposite electrode prepared by electrophoretic deposition as a high-performance anode for lithium-ion batteries10.1002/celc.201600012 ↗
29. Direct electrophoretic deposition of binder-free Co3O4/graphene sandwich-like hybrid electrode as remarkable lithium ion battery anode10.1021/acsami.7b10683 ↗
30. Electrophoretic packing structure from aqueous nanoparticle suspension in pulse DC charging10.1016/j.colsurfa.2010.01.057 ↗
31. Electrophoretic deposition of graphene-related materials: a review of the fundamentals10.1016/j.pmatsci.2016.03.002 ↗
32. Dissolution and reduction of cobalt ions in the polyol process using ethylene glycol : identification of the active species and its role10.1039/C5NJ00669D ↗
33. Formation of NiO nanoparticle-attached nanographitic flake layers deposited by pulsed electrophoretic deposition for ethanol electro-oxidation10.1016/j.jallcom.2016.12.136 ↗
34. A current opinion on electrophoretic deposition in pulsed and alternating fields10.1021/jp306777q ↗
35. Ethanol electro-oxidation on nanoworm-shaped Pd particles supported by nanographitic layers fabricated by electrophoretic deposition10.1039/C5RA06218G ↗
36. Single-step electrophoretic deposition of non-noble metal catalyst layer with low onset voltage for ethanol electro-oxidation10.1021/acsami.5b12509 ↗
37. Co3O4 nanocrystals coupled with O- and N-doped carbon nanoweb as a synergistic catalyst for hybrid Li-air batteries10.1016/j.nanoen.2014.10.036 ↗
38. Hierarchically ordered mesoporous Co3O4 materials for high performance Li-ion batteries
39. Cobalt carbonate/and cobalt oxide/graphene aerogel composite anodes for high performance Li-ion batteries10.1021/am504851s ↗
40. Facile fabrication of Co3O4/nitrogen-doped graphene hybrid materials as high performance anode materials for lithium ion batteries10.1039/C6CE00462H ↗
41. Tailored graphene-encapsulated mesoporous Co3O4 composite microspheres for high-performance lithium ion batteries10.1039/c2jm32571c ↗
42. Quantifying defects in graphene via Raman spectroscopy at different excitation energies10.1021/nl201432g ↗
43. Development of a novel graphene/Co3O4 composite for hybrid capacitive deionization system10.1016/j.desal.2018.03.023 ↗
44. 3D hierarchical Co3O4/Reduced graphene oxide/melamine derived carbon foam as a comprehensive microwave absorbing material10.1016/j.jallcom.2019.03.359 ↗
45. Recommended Auger parameters for 42 elemental solids10.1016/j.elspec.2011.12.001 ↗
46. Surface analysis and the adsorption of Co(II) on goethite10.1016/0021-9797(83)90199-6 ↗
47. The nature of excess oxygen in Co3O4+ε10.1016/0169-4332(88)90089-X ↗
48. Hydrogenated CoOx nanowire@Ni(OH)2 nanosheet core-shell nanostructures for high-performance asymmetric supercapacitor10.1039/c4nr00771a ↗
49. A mononuclear cobalt complex with an organic ligand acting as a precatalyst for efficient visible light-driven water oxidation10.1039/C3CC48059C ↗
50. Mesoporous Co3O4 sheets/3D graphene networks nanohybrids for high-performance sodium-ion battery anode10.1016/j.jpowsour.2014.09.121 ↗
51. Nitrogen-Doped porous carbon/Co3O4 nanocomposites as anode materials for lithium-ion batteries10.1021/am406053s ↗
52. Micro-/nanostructured Co3O4 anode with enhanced rate capability for lithium-ion batteries10.1021/am500452t ↗
53. Ultralight flower ball-like Co3O4/melamine-derived carbon foam as anode materials for lithium-ion batteries10.1016/j.jallcom.2017.07.130 ↗
54. RGO/Co3O4 composites prepared using GO-MOFs as precursor for advanced lithium-ion batteries and supercapacitors electrodes10.1016/j.jpowsour.2017.07.076 ↗
55. Highly conductive C-Si@G nanocomposite as a high-performance anode material for Li-ion batteries10.1016/j.electacta.2018.11.020 ↗
56. N-doped TiO2/rGO hybrids as superior Li-ion battery anodes with enhanced Li-ions storage capacity10.1016/j.jallcom.2019.01.061 ↗