Interface failure behavior of YSZ thermal barrier coatings during thermal shock
Source abstract
Abstract
Abstract A high temperature interface deformation test system was built for failure analysis of YSZ thermal barrier coatings during 1100 °C thermal shock and thermal cycles. The strain distribution and evolution law near the thermal barrier coatings interface were in-situ real-time observed and measured by the developed high temperature interface deformation test system. After repeated thermal shock, crack initiation vertical to the interface will periodically come into being at the location of strain concentration area near the ceramic top coat surface. These cracks extend from the top coat surface to the interface, of which the period of crack agrees well with the theoretical analysis. EDS analysis indicate that the inter-diffusion lead to an influential tensile strain in the interface area and bond coat layer. Tensile tests indicate that with increase of thermal shock times, not only the bonding strength of the TBCs decreases, but also the tensile failure location change significantly.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Progress update on failure mechanisms of advanced thermal barrier coatings: a review10.1016/j.porgcoat.2015.09.019 ↗
2. Modeling of thermal properties and failure of thermal barrier coatings with the use of finite element methods: a review10.1016/j.jeurceramsoc.2015.12.038 ↗
3. Materials design for the next generation thermal barrier coatings10.1146/annurev.matsci.33.011403.113718 ↗
4. Effect of porous microstructure on the elastic modulus of plasma-sprayed thermal barrier coatings: experiment and numerical analysis10.1016/j.surfcoat.2013.08.030 ↗
5. A nondestructive technique for determining thermal properties of thermal barrier coatings10.1063/1.1826217 ↗
6. Characterization of a cyclic displacement instability for a thermally grown oxide in a thermal barrier system10.1016/S1359-6454(01)00071-4 ↗
7. Residual stress evolution regularity in thermal barrier coatings under thermal shock loading10.1063/2.1402109 ↗
8. Double-ceramic-layer thermal barrier coatings of La2Zr2O7/YSZ deposited by electron beam-physical vapor deposition10.1016/j.jallcom.2008.06.064 ↗
9. Novel thermal barrier coatings based on La2(Zr0.7Ce0.3)2O7/8YSZ double-ceramic-layer systems deposited by electron beam physical vapor deposition10.1016/j.jallcom.2010.12.203 ↗
10. Thermal barrier coatings for gas-turbine engine applications10.1126/science.1068609 ↗
11. Mechanisms controlling the durability of thermal barrier coatings10.1016/S0079-6425(00)00020-7 ↗
12. TEM analysis of the microstructure of thermal barrier coatings after isothermal oxidation10.1016/j.actamat.2012.09.028 ↗
13. Understanding the residual stress distribution through the thickness of atmosphere plasma sprayed (APS) thermal barrier coatings (TBCs) by high energy synchrotron XRD; digital image correlation (DIC) and image based modelling10.1016/j.actamat.2017.03.044 ↗
14. Failure mechanisms of thermal barrier coatings exposed to elevated temperatures10.1016/0040-6090(82)90019-0 ↗
15. Failure mechanisms associated with the thermally grown oxide in plasma-sprayed thermal barrier coatings10.1016/S1359-6454(00)00171-3 ↗
16. Failure modes in plasma-sprayed thermal barrier coatings10.1016/S0921-5093(02)00251-4 ↗
17. Hot corrosion behavior of detonation gun sprayed Cr3C2–NiCr coatings on Ni and Fe-based superalloys in Na2SO4–60% V2O5 environment at 900°C10.1016/j.jallcom.2007.09.019 ↗
18. Mechanical properties of zirconia composite ceramics10.1016/j.ceramint.2013.03.014 ↗
19. Thermal barrier coatings technology: critical review, progress update, remaining challenges and prospects10.1179/1743280413Y.0000000019 ↗
20. High-temperature delamination mechanisms of thermal barrier coatings: in-situ digital image correlation and finite element analyses10.1016/j.actamat.2017.01.061 ↗
21. Comparison of thermal shock resistances of plasma-sprayed nanostructured and conventional yttria stabilized zirconia thermal barrier coatings10.1016/j.ceramint.2012.05.060 ↗
22. Fracture mechanisms of ytterbium monosilicate environmental barrier coatings during cyclic thermal exposure10.1016/j.actamat.2015.10.019 ↗
23. Investigation of thermal high cycle and low cycle fatigue mechanisms of thick thermal barrier coatings10.1016/S0921-5093(97)00852-6 ↗
24. Thermal properties and thermal shock resistance of γ-Y 2 Si 2 O 710.1111/j.1551-2916.2008.02470.x ↗
25. Thermal shock behavior of EB-PVD thermal barrier coatings10.1016/j.surfcoat.2007.02.003 ↗
26. Thermal shock cycling behavior of NiCoCrAlYSiB coatings on Ni-base superalloys: I. Accelerated oxidation attack10.1016/j.msea.2005.06.028 ↗
27. Thermal shock testing of burner cans coated with a thick thermal barrier coating10.1361/105996398770350828 ↗
28. Thermal shock and fatigue resistance evaluation of functionally graded coating for gas turbine blades by laser heating method10.1016/0961-9526(95)00041-K ↗
29. Failure behavior of thermal barrier coatings in creep environment
30. Mixed-mode interfacial fracture toughness for thermal barrier coating10.1016/j.engfracmech.2006.10.021 ↗
31. Interfacial fracture characteristic and crack propagation of thermal barrier coatings under tensile conditions at elevated temperatures10.1007/s10704-008-9246-y ↗
32. Microcracks characterization for thermal barrier coatings at high temperature10.1142/S0218625X13500352 ↗
33. Oxidation and spallation of FeCrAl alloys and thermal barrier coatings: in situ investigation under controlled temperature gradient10.3184/096034010X12710823807053 ↗
34. In-situ and real-time tests on the damage evolution and fracture of thermal barrier coatings under tension: a coupled acoustic emission and digital image correlation method10.1016/j.surfcoat.2013.12.010 ↗
35. Acoustic emission analysis on tensile failure of air plasma-sprayed thermal barrier coatings10.1016/j.surfcoat.2012.03.050 ↗
36. Real-time acoustic emission testing based on wavelet transform for the failure process of thermal barrier coatings10.1063/1.3043458 ↗
37. Damage evolution and rupture time prediction in thermal barrier coatings subjected to cyclic heating and cooling: an acoustic emission method10.1016/j.actamat.2011.06.018 ↗
38. Progress in life time modeling of APS-TBC Part I: residual, thermal and growth stresses including the role of thermal fatigue10.1179/mht.2004.010 ↗
39. Measuring and modeling the TBC damage kinetics by using acoustic emission analysis10.1016/j.surfcoat.2007.07.109 ↗
40. Determining a critical strain for APS thermal barrier coatings under service relevant loading conditions10.1016/j.ijfatigue.2011.11.018 ↗
41. Multiscale monitoring of interface failure of brittle coating/ductile substrate systems: a non-destructive evaluation method combined digital image correlation with acoustic emission10.1063/1.3651378 ↗
42. Quantitative assessment of the surface crack density in thermal barrier coatings10.1007/s10409-014-0019-8 ↗
43. Oxidation and spallation of FeCrAl alloys and thermal barrier coatings:in situ investigation under controlled temperature gradient10.3184/096034010X12710823807053 ↗
44. Atmospheric plasma sprayed coatings of nanostructured zirconia10.1016/S0955-2219(01)00291-6 ↗
45. A real time deformation evaluation method for surface and interface of thermal barrier coatings during 1100 °C thermal shock10.1088/0957-0233/23/10/105604 ↗
46. Influence of temperature and atmosphere on the strength and elastic modulus of solid oxide fuel cell anode supports10.1016/j.jpowsour.2016.02.027 ↗
47. Coupled effects of temperature gradient and oxidation on thermal stress in thermal barrier coating system10.1016/S0020-7683(00)00309-7 ↗
48. Multi-layered thermal barrier coatings on BMI polyimide matrix composite10.1016/j.surfcoat.2018.01.007 ↗
49. The influence of temperature gradient across YSZ on thermal cyclic lifetime of plasma-sprayed thermal barrier coatings10.1016/j.ceramint.2015.05.049 ↗
50. On the rumpling mechanism in nickel-aluminide coatings : Part II: characterization of surface undulations and bond coat swelling
51. Evolution of a diffusion aluminide bond coat for thermal barrier coatings during thermal cycling10.1016/S1359-6454(03)00014-4 ↗
52. Effect of thermally grown oxide (TGO) microstructure on the durability of TBCs with PtNiAl diffusion bond coats10.1016/j.msea.2005.11.014 ↗
53. Effect of diffusion barrier on the high-temperature oxidation behavior of thermal barrier coatings10.1016/j.jallcom.2007.11.083 ↗
54. Freund · 2004
55. Fracture behavior under mixed-mode loading of ceramic plasma-sprayed thermal barrier coatings at ambient and elevated temperatures10.1016/j.engfracmech.2005.01.010 ↗
56. Fractographic and microstructural study of isothermally and cyclically heat treated thermal barrier coatings10.1016/j.surfcoat.2012.02.040 ↗
57. A mechanistic study of oxidation-induced degradation in a plasma-sprayed thermal barrier coating system. : Part II: life prediction model10.1016/S1359-6454(01)00061-1 ↗