DataVXPhysical MesomechanicsPaper
journal article·2026-04

Application of Wire and Electron Beam Additive Manufacturing for Large-Sized Industrial Products

A. V. Chumaevskii, D. A. Gurianov, K. S. Osipovich, A. V. Filippov, S. V. Fortuna, N. N. Shamarin, V. M. Semenchuk, E. A. Sidorov, Yu. V. Kushnarev, A. A. Belosludtseva, V. E. Rubtsov, S. Yu. Tarasov, E. A. Kolubaev

Physical Mesomechanics· Volume 29· Issue 2
Publisher page
Source abstract

Abstract

Abstract This paper focuses on studying the structure formation of large-scale nickel-based alloy and steel samples and compares them with previously obtained data on additive titanium, aluminum, copper, and other alloys. These studies demonstrate that the structural and phase state of nickel-based alloys and steels mainly depends on the alloy type and alloying elements. The longer existence of a melt pool and resulting partitioning of alloying elements for Inconel 625 alloys pose a significant printing challenge, while Inconel 718 alloys and high-alloy nickel-based high temperature alloys exhibit excellent mechanical properties. Furthermore, partitioning of alloying elements along dendrite boundaries can be unavoidable during heat treatment due to the formation of insoluble carbide particles. Printing austenitic stainless steels results in a structure represented by dendritic colonies, while ferrite-pearlite steels are characterized by the formation of a grain structure. Various types of steels and nickel-based alloys, as well as bimetallic components based on them, do not typically exhibit defects such as pores or cracks. A smooth transition zone from one material to another is formed in the structural gradient zone. The obtained data demonstrate that wire and feed electron beam additive manufacturing is one of the most suitable for the manufacture of parts from various types of steels and nickel-based alloys, including bimetallic components based on them.
Source: openalex_inverted_index · Quality: baseline

Research context

Metals & alloysMaterials processing

OpenAlex topics: Additive Manufacturing Materials and Processes · Advanced Machining and Optimization Techniques · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Ding, H., Li, M., Wen, H., Shao, Y., Chen, J., Feng, J., Chang, S., and Li, L., Research on microstructure and mechanical properties of 316L stainless steel fabricated by coaxial electron beam wire feeding additive manufacturing, Materials Letters, 2025, vol. 399, p. 138945. https://doi.org/10.1016/j.matlet.2025.13894510.1016/j.matlet.2025.138945 ↗
2. Shu, X., Chen, G., Wang, C., Wang, C., and Sun, L., A novel electron beam additive manufacturing method: diffusion–based pre–melted electron beam freeform fabrication, Materials Letters, 2025, vol. 398, p. 138885. https://doi.org/10.1016/j.matlet.2025.13888510.1016/j.matlet.2025.138885 ↗
3. Shu, X., Wang, C., and Chen, G., Pre–melted electron beam freeform fabrication additive manufacturing: modeling and numerical simulation, Weld World, 2024, vol. 68, pp. 163–176. https://doi.org/10.1007/s40194-023-01647-810.1007/s40194-023-01647-8 ↗
4. Wu, J., Li, P., Li, L., Wang, L., Liu, L., Shen Y., and Wang, S., Study on High–Temperature Tensile Properties and Microstructure of Electron Beam Dual–Wire Additive Manufactured TA1/TC4 Titanium Alloy, J. of Mater. Eng. and Perform., 2025. https://doi.org/10.1007/s11665-025-12069-610.1007/s11665-025-12069-6 ↗
5. Bi, J., Yang, S., Zhao, X., Tian, J., Li, Y., and Meng, X., Study on Microstructure Uniformity of Ti-6Al-4V through Electron Beam Additive Manufacturing, J. of Mater. Eng. and Perform., 2025, vol. 34, pp. 17759–17770. https://doi.org/10.1007/s11665-024-10422-910.1007/s11665-024-10422-9 ↗
6. Present, S.J., Taminger, K.M., Domack, C.S., and Hemker, K.J., The Inhomogeneous Microstructure and Mechanical Properties of Ti–6Al–4V Additively Manufactured by Electron Beam Freeform Fabrication, Metall. Mater. Trans A, 2023, vol. 54, pp. 312–319. https://doi.org/10.1007/s11661-022-06874-010.1007/s11661-022-06874-0 ↗
7. Li, P., Wu, J., Shen, Y., Wang, S., Zhang, J., Liu, L., Peng, Y., and Chen, Y., Thermal corrosion behavior of TA1/TC4 titanium alloy fabricated by electron beam dual–wire additive manufacturing in a mixed salt of NaCl and Na₂SO₄, Appl. Phys. A, 2025, vol. 131, p. 835. https://doi.org/10.1007/s00339-025-09013-910.1007/s00339-025-09013-9 ↗
8. Panin, A.V., Kazachenok, M.S., Shugurov, A.R., Pribytkov, G.A., and Krukovskii, K.V., Microstructure and scratch behavior of TiB/Ti-6Al-4V composites fabricated by wire–feed electron beam additive manufacturing, Materials Letters, 2026, vol. 405, p. 139741. https://doi.org/10.1016/j.matlet.2025.13974110.1016/j.matlet.2025.139741 ↗
9. Lai, X. and Wei, Z., Thermo–fluid–mechanical modeling and deformation suppression method for electron beam wire–feed additive manufacturing, International Journal of Heat and Mass Transfer, 2025, vol. 252, p. 127449. https://doi.org/10.1016/j.ijheatmasstransfer.2025.12744910.1016/j.ijheatmasstransfer.2025.127449 ↗
10. Zhou, Q., Zhang, X., Lu, S., Tang, H., and Qian, M., Microstructure and mechanical properties of electron beam additively manufactured Ti−1Al−8V−5Fe alloy with different iron contents, Trans. Nonferrous Met. Soc. China, 2025, vol. 35, pp. 1506–1516. https://doi.org/10.1016/S1003-6326(25)66763-X10.1016/S1003-6326(25)66763-X ↗
11. Chumaevskii, A., Tarasov, S., Gurianov, D., Moskvichev, E., Rubtsov, V., Savchenko, N., Panfilov, A., Korsunsky, A.M., and Kolubaev, E., Analysis of the Structure and Properties of As-Built and Heat–Treated Wire–Feed Electron Beam Additively Manufactured (WEBAM) Ti–4Al–3V Spherical Pressure Vessel, Metals, 2024, vol. 14, no. 12, p. 1379. https://doi.org/10.3390/met1412137910.3390/met14121379 ↗
12. Shi, Y., Gong, S., Xu, H., Chen, W., Wang, Z., Yang, G., Liu, X., and Qi, B., Improving ductility in coaxial electron beam wire additive manufacturing of Ti48Al2V–based alloy with Cu element introducing globular γ-grains, Journal of Alloys and Compounds, 2025, vol. 1035, p. 181588. https://doi.org/10.1016/j.jallcom.2025.18158810.1016/j.jallcom.2025.181588 ↗
13. Kamelina, K.D., Panin, A.V., Syrtanov, M.S., and Kashkarov, E.B., In-situ X-ray diffraction study of hydrogen–induced phase transformation in wire–feed electron–beam additive manufactured Ti-6Al-4V alloy, Journal of Alloys and Compounds, 2025, vol. 1045, p. 184584. https://doi.org/10.1016/j.jallcom.2025.18458410.1016/j.jallcom.2025.184584 ↗
14. Sullivan, E., Polizzi, A., Iten, J., Nuechterlein, J., Domack, M., and Liu, S., Microstructural characterization and tensile behavior of reaction synthesis aluminum 6061 metal matrix composites produced via laser beam powder bed fusion and electron beam freeform fabrication, Int. J. Adv. Manuf. Technol., 2022, vol. 121, pp. 2197–2218. https://doi.org/10.1007/s00170-022-09443-210.1007/s00170-022-09443-2 ↗
15. Astafurova, E., Astafurov, S., Melnikov, E., and Kolubaev, E., In-situ sintering of “Al/intermetallic Al-Ni alloy” compound using a dual–wire electron–beam additive manufacturing, Materials Letters, 2026, vol. 402, p. 139333. https://doi.org/10.1016/j.matlet.2025.13933310.1016/j.matlet.2025.139333 ↗
16. Xue, S., Du, D., Tang, Y., Lu, Y., Zhang, D., Qi, J., Zhang, J., and Chang, B., Influence of substrate thickness on the microstructure and mechanical properties of Al–Si–Cu/Al–Cu hybrid structures additively manufactured by electron beam directed energy deposition, Journal of Materials Research and Technology, 2025, vol. 35, pp. 5271–5290. https://doi.org/10.1016/j.jmrt.2025.02.20210.1016/j.jmrt.2025.02.202 ↗
17. Long, H., Li, Y., Wu, Y., Lian, Y., Zhou, J., Liang, X., and Lin, F., Achieving crack–free and strong–ductile Ni-based superalloys via harnessing segregation to create interlocking microstructures during electron beam additive manufacturing, Journal of Materials Processing Technology, 2025, vol. 346, p. 119103. https://doi.org/10.1016/j.jmatprotec.2025.11910310.1016/j.jmatprotec.2025.119103 ↗
18. Vorontsov, A., Zykova, A., Kushnarev, Y., Utyaganova, V., Moskvichev, E., Gurianov, D., Osipovich, K., Kolubaev, E., Savchenko, N., and Tarasov, S., Grain refinement and element partitioning in ultrasound–assisted wire and electron beam additively manufactured Udimet 500 nickel superalloy, Journal of Alloys and Compounds, 2025, vol. 1045, p. 179474. https://doi.org/10.1016/j.jallcom.2025.17947410.1016/j.jallcom.2025.179474 ↗
19. Yu, B., Wang, T., Wei, L., Jiang, S., and Zhang, H., The Enhancement Effect of Carbides on the Printability and Mechanical Properties of a Ni–Fe–Cr–Al–Ti Alloy Processed by Electron Beam Freeform Fabrication, Metallurgical and Materials Transactions A, 2024, vol. 55, pp. 774–790. https://doi.org/10.1007/s11661-023-07282-810.1007/s11661-023-07282-8 ↗
20. Moskvichev, E., Shamarin, N., and Smolin, A., Structure and Mechanical Properties of Cu–Al–Mn Alloys Fabricated by Electron Beam Additive Manufacturing, Materials, 2023, vol. 16, p. 123. https://doi.org/10.3390/ma1601012310.3390/ma16010123 ↗
21. Liu, J., Wu, Z., Mu, Y., Lai, J., Qiu, X., Fan, C., Hu, Z., Liu, C., Zhang, Z., Jia, Y., Jiang, H., Jia, Y., and Wang, G., In-situ reaction–driven self–lubricating protection for superior wear resistance in electron beam additively manufactured hierarchical high–entropy nanocomposites, Tribology International, 2026, vol. 214, p. 111203. https://doi.org/10.1016/j.triboint.2025.11120310.1016/j.triboint.2025.111203 ↗
22. Shi, Y., Gong, S., Xu, H., Chen, W., Wang, Z., Yang, G., Liu, X., and Qi, B., Achieving equiaxed and lamellar TiAl alloys via cold–cathode electron beam additive manufacturing with dual–wire synergistic control, Journal of Materials Research and Technology, 2025, vol. 34, pp. 1288–1303. https://doi.org/10.1016/j.jmrt.2024.12.13110.1016/j.jmrt.2024.12.131 ↗
23. Astafurova, E.G., Danilova, L.V., Nifontov, A.S., Luchin, A.V., Astafurov, S.V., and Kolubaev, E.A., Intermetallic Fe–Ti alloy obtained by dual–wire electron–beam additive manufacturing, Next Materials, 2025, vol. 8, p. 100739. https://doi.org/10.1016/j.nxmate.2025.10073910.1016/j.nxmate.2025.100739 ↗
24. Terentyev, E.V., Kozyrev, K.M., Borodavkina, K.T., Shishkin, D.V., Sliva, A.P., Goncharov, A.L., Gudenko, A.V., and Zhgut, D.A., Obtaining of combined titanium–steel structures by electron beam freeform fabrication using niobium and copper interlayers, The International Journal of Advanced Manufacturing Technology, 2024, vol. 132, pp. 3519–3533. https://doi.org/10.1007/s00170-024-13556-110.1007/s00170-024-13556-1 ↗
25. Zhang, R., Jiang, F., Xue, L., and Yu, J., Review of Additive Manufacturing Techniques for Large–Scale Metal Functionally Graded Materials, Crystals, 2022, vol. 12, p. 858. https://doi.org/10.3390/cryst1206085810.3390/cryst12060858 ↗
26. Taminger, K.M. and Hafley, R.A., Electron beam Freeform Fabrication for Cost Effective Near–Net Shape Manufacturing, NATO AVT, 2006, vol. 139, pp. 11–16. https://ntrs.nasa.gov/citations/20080013538
27. Additive Manufacturing Services for Metal Parts & Prototypes, https://www.sciaky.com/additive-manufacturing/services(AccessedNovember23,2025
28. Dave, V.R., Matz, J.E., and Eagar, T.W., Electron Beam Solid Freeform Fabrication of Metal Parts, Proceedings of 6th SFF Symposium, 1995, pp. 64–71.
29. Karakas, M.S., Günen, A., Lindner, T., Küçük, Y., Kon, Ö., Joshi, S., Çam, G., and Lampke, T., Comparative study of heat treatment routes for enhancing high–temperature wear resistance of EBM–processed Inconel, Materials Today Communications, 2025, vol. 718, no. 49, p. 113864. https://doi.org/10.1016/j.mtcomm.2025.11386410.1016/j.mtcomm.2025.113864 ↗
30. Olakanmi, E.O., Cochrane, R.F., and Dalgarno, K.W., A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties, Progress in Materials Science, 2015, vol. 74, pp. 401–477. https://doi.org/10.1016/j.pmatsci.2015.03.00210.1016/j.pmatsci.2015.03.002 ↗
31. Evans, S.I., Wang, J., Qin, J., He, Y., Shepherd, P., and Ding, J., A review of WAAM for steel construction – Manufacturing, material and geometric properties, design, and future directions, Structures, 2022, vol. 44, pp. 1506–1522. https://doi.org/10.1016/j.istruc.2022.08.08410.1016/j.istruc.2022.08.084 ↗
32. Ding, D., Pan, Z., Cuiuri, D., and Li, H., Wire–feed additive manufacturing of metal components: technologies, developments and future interests, The International Journal of Advanced Manufacturing Technology, 2015, vol. 81, pp. 465–481. https://doi.org/10.1007/s00170-015-7077-310.1007/s00170-015-7077-3 ↗
33. Negi, S., Nambolan, A.A., Kapil, S., Joshi, P.S., Manivannan, R., Karunakaran K.P, and Bhargava P., Review on electron beam based additive manufacturing, Rapid Prototyping Journal, 2020, vol. 26, pp. 485–498. https://doi.org/10.1108/RPJ-07-2019-018210.1108/RPJ-07-2019-0182 ↗
34. Utyaganova, V.R., Filippov, A.V., Shamarin, N.N., Vorontsov, A.V., Savchenko, N.L., Fortuna, S.V., Gurianov, D.A., Chumaevskii, A.V., Rubtsov, V.E., and Tarasov, S.Yu., Controlling the porosity using exponential decay heat input regimes during electron beam wire–feed additive manufacturing of Al-Mg alloy, The International Journal of Advanced Manufacturing Technology, 2020, vol. 108, pp. 2823–2838. https://doi.org/10.1007/s00170-020-05539-910.1007/s00170-020-05539-9 ↗
35. Zhang, D., Du, D., Xue, S., Qi, J., Pu, Z., Lu, Y., Tang, Y., and Chang, B., Residual stress and deformation in wire–feed electron beam additive manufactured aluminum components, The International Journal of Advanced Manufacturing Technology, 2024, vol. 131, pp. 1665–1676. https://doi.org/10.1007/s00170-024-13169-810.1007/s00170-024-13169-8 ↗
36. Zykova, A.P., Dobrovolsky, A.R., Semenchuk, V.M., Nikolaeva, A.V., Utyaganova, V.R., Nikonov, S.Y., Chumaevskii, A.V., and Tarasov, S.Y., Microstructural evolution of electron beam and wire–arc additively manufactured hypoeutectic and eutectic silumins, Letters on Materials, 2023, vol. 13, pp. 197–203. https://doi.org/10.22226/2410-3535-2023-3-197-20310.22226/2410-3535-2023-3-197-203 ↗
37. Wanjara, P., Watanabe, K., de Formanoir, C., Yang, Q., Bescond, C., Godet, S., Brochu, M., Nezaki, K., Gholipour, J., and Patnaik, P., Titanium Alloy Repair with Wire–Feed Electron Beam Additive Manufacturing Technology, Advances in Materials Science and Engineering, 2019, vol. 2019, p. 3979471. https://doi.org/10.1155/2019/397947110.1155/2019/3979471 ↗
38. Kovalchuk, D., Melnyk, V., Melnyk, I., Savvakin, D., Dekhtyar, O., Stasiuk, O., and Markovsky, P., Microstructure and Properties of Ti-6Al-4V Articles 3D-Printed with Co-axial Electron Beam and Wire Technology, J. of Mater. Eng. and Perform., 2021, vol. 30, pp. 5307–5322. https://doi.org/10.1007/s11665-021-05770-910.1007/s11665-021-05770-9 ↗
39. Pixner, F., Warchomicka, F., Peter, P., Steuwer, A., Colliander, M.H., Pederson, R., and Enzinger, N., Wire–Based Additive Manufacturing of Ti-6Al-4V Using Electron Beam Technique, Materials, 2020, vol. 13, p. 3310. https://doi.org/10.3390/ma1315331010.3390/ma13153310 ↗
40. Zhang, G., Xiong, H., Yu, H., Qin, R., Liu, W., and Yuan, H., Microstructure evolution and mechanical properties of wire–feed electron beam additive manufactured Ti-5Al-2Sn-2Zr-4Mo-4Cr alloy with different subtransus heat treatments, Materials & Design, 2020, vol. 195, p. 109063. https://doi.org/10.1016/j.matdes.2020.10906310.1016/j.matdes.2020.109063 ↗
41. Tayon, W.A., Shenoy, R.N., Redding, M.R., Bird, R.K., and Hafley, R.A., Correlation Between Microstructure and Mechanical Properties in an Inconel 718 Deposit Produced Via Electron Beam Freeform Fabrication, Journal of Manufacturing Science and Engineering, 2014, vol. 136, p. 061005. https://doi.org/10.1115/1.402850910.1115/1.4028509 ↗
42. Wahlmann, B., Körner, C., and Nunn, M., Electron beam wire cladding of nickel alloys and stainless steel on a reactor pressure vessel steel, Materials Science and Engineering: A, 2021, vol. 811, p. 141082. https://doi.org/10.1016/j.msea.2021.14108210.1016/j.msea.2021.141082 ↗
43. Xu, D., Wang, H., Tao, X., Yao, Z., Zhang, S., and Oleksander, M., Investigation on Microstructure, Hardness and Wear Resistance of Electron Beam Wire–Feeding Deposited Inconel 718 Alloy Coatings, Metals and Materials International, 2021, vol. 27, pp. 1263–1272. https://doi.org/10.1007/s12540-019-00494-x10.1007/s12540-019-00494-x ↗
44. Filippov, A.V., Khoroshko, E.S., Shamarin, N.N., Kolubaev, E.A., and Tarasov, S.Yu., Use of Impact Treatment for Structural Modification and Improvement of Mechanical Properties of CuAl7 Bronze Obtained by Electron Beam Additive Manufacturing (EBAM), Russian Physics Journal, 2023, vol. 65, pp. 2016–2022. https://doi.org/10.1007/s11182-023-02864-w10.1007/s11182-023-02864-w ↗
45. Zhang, X., Shi, H., Wang, X., Zhang, S., Luan, P., Hu, X., and Xu, C., Processing, microstructure, and mechanical behavior of AZ31 magnesium alloy fabricated by electron beam additive manufacturing, Journal of Alloys and Compounds, 2023, vol. 938, p. 168567. https://doi.org/10.1016/j.jallcom.2022.16856710.1016/j.jallcom.2022.168567 ↗
46. Make Metal Parts Faster & Cheaper with EBAM Metal 3D Printing Technology, https://www.sciaky.com/additive-manufacturing/electron-beam-additive-manufacturing-technology(AccessedNovember23,2025
47. Feng, Y., Zhan, B., He, J., and Wang, K., The double–wire feed and plasma arc additive manufacturing process for deposition in Cr-Ni stainless steel, Journal of Materials Processing Technology, 2018, vol. 259, pp. 206–215. https://doi.org/10.1016/j.jmatprotec.2018.04.04010.1016/j.jmatprotec.2018.04.040 ↗
48. Moskvina, V.A., Melnikov, E.V., Panchenko, M.Y., Maier, G.G., Reunova, K.A., Astafurov, S.V., Kolubaev, E.A., and Astafurova, E.G., Stabilization of austenitic structure in transition zone of “austenitic stainless steel/NiCr alloy” joint fabricated by wire–feed electron beam melting, Materials Letters, 2020, vol. 277, p. 128321. https://doi.org/10.1016/j.matlet.2020.12832110.1016/j.matlet.2020.128321 ↗
49. Shu, X., Chen, G., Liu, J., Zhang, B., and Feng, J., Microstructure evolution of copper/steel gradient deposition prepared using electron beam freeform fabrication, Materials Letters, 2018, vol. 213, pp. 374–377. https://doi.org/10.1016/j.matlet.2017.11.01610.1016/j.matlet.2017.11.016 ↗
50. Osipovich, K., Vorontsov, A., Chumaevskii, A., Gurianov, D., Shamarin, N., Savchenko, N., and Kolubaev, E., Characterization of a Bimetallic Multilayered Composite “Stainless Steel/Copper” Fabricated with Wire–Feed Electron Beam Additive Manufacturing, Metals, 2021, vol. 11, p. 1151. https://doi.org/10.3390/met1108115110.3390/met11081151 ↗
51. Xu, J., Peng, Y., Zhou, Q., Fan, J., Kong, J., Wang, K., Guo, S., and Zhu, J., Microstructure and mechanical properties of Ti-52 at% Al alloy synthesized in-situ via dual–wires electron beam freeform fabrication, Materials Science and Engineering: A, 2020, vol. 798, p. 140232. https://doi.org/10.1016/j.msea.2020.14023210.1016/j.msea.2020.140232 ↗
52. Filippov, A.V., Khoroshko, E.S., Shamarin, N.N., Savchenko, N.L., Moskvichev, E.N., Utyaganova, V.R., Kolubaev, E.A., Smolin, A.Y., and Tarasov, S.Y., Characterization of gradient CuAl–B4C composites additively manufactured using a combination of wire–feed and powder–bed electron beam deposition methods, Journal of Alloys and Compounds, 2021, vol. 859, p. 157824. https://doi.org/10.1016/j.jallcom.2020.15782410.1016/j.jallcom.2020.157824 ↗
53. Osipovich, K., Vorontsov, A., Chumaevskii, A., Moskvichev, E., Zakharevich, I., Dobrovolsky, A., Sudarikov, A., Zykova, A., Rubtsov, V., and Kolubaev, E., Features of Microstructure and Texture Formation of Large–Sized Blocks of C11000 Copper Produced by Electron Beam Wire–Feed Additive Technology, Materials, 2022, vol. 15, p. 814. https://doi.org/10.3390/ma1503081410.3390/ma15030814 ↗
54. Astafurova, E.G., Panchenko, M.Y., Moskvina, V.A., Maier, G.G., Astafurov, S.V., Melnikov, E.V., Fortuna, A.S., Reunova, K.A., Rubtsov, V.E., and Kolubaev, E.A., Microstructure and grain growth inhomogeneity in austenitic steel produced by wire–feed electron beam melting: the effect of post–building solid–solution treatment, Journal of Materials Science, 2020, vol. 55, pp. 9211–9224. https://doi.org/10.1007/s10853-020-04424-w10.1007/s10853-020-04424-w ↗
55. Astafurov, S. and Astafurova, E., Phase Composition of Austenitic Stainless Steels in Additive Manufacturing: A Review, Metals, 2021, vol. 11, p. 1052. https://doi.org/10.3390/met1107105210.3390/met11071052 ↗
56. Panchenko, M.Y., Astafurova, E.G., Moskvina, V.A., Maier, G.G., Astafurov, S.V., Melnikov, E.V., Reunova, K.A., Rubtsov, V.E., and Kolubaev, E.A., The effect of niobium on microstructure and mechanical properties of austenitic CrNi steel produced by wire–feed electron beam additive manufacturing, Nanoscience and Technology: An International Journal, 2020, vol. 11, pp. 109–118. https://doi.org/10.1615/NanoSciTechnolIntJ.202003395310.1615/NanoSciTechnolIntJ.2020033953 ↗
57. Panin, A., Martynov, S., Kazachenok, M., Kazantseva, L., Bakulin, A., Kulkova, S., Perevalova, O., and Sklyarova, E., Effects of Water Cooling on the Microstructure of Electron Beam Additive–Manufactured Ti-6Al-4V, Metals, 2021, vol. 11, p. 1742. https://doi.org/10.3390/met1111174210.3390/met11111742 ↗
58. Shugurov, A., Panin, A., Kazachenok, M., Kazantseva, L., Martynov, S., Bakulin, A., and Kulkova, S., Deformation Behavior of Wrought and EBAM Ti-6Al-4V under Scratch Testing, Metals, 2021, vol. 11, p. 1882. https://doi.org/10.3390/met1111188210.3390/met11111882 ↗
59. Kolubaev, E.A., Rubtsov, V.E., Chumaevsky, A.V., and Astafurova, E.G., Micro-, Meso- and Macrostructural Design of Bulk Metallic and Polymetallic Materials by Wire–Feed Electron–Beam Additive Manufacturing, Physical Mesomechanics, 2022, vol. 25, pp. 479–491. https://doi.org/10.1134/S102995992206001710.1134/S1029959922060017 ↗
60. Tarasov, S.Y., Filippov, A.V., Shamarin, N.N., Fortuna, S.V., Maier, G.G., and Kolubaev, E.A., Microstructural evolution and chemical corrosion of electron beam wire–feed additively manufactured AISI 304 stainless steel, Journal of Alloys and Compounds, 2019, vol. 803, pp. 364–370. https://doi.org/10.1016/j.jallcom.2019.06.24610.1016/j.jallcom.2019.06.246 ↗
61. Zykova, A., Vorontsov, A., Nikolaeva, A., Chumaevskii, A., Kalashnikov, K., Gurianov, D., Savchenko, N., Nikonov, S., and Kolubaev, E., Structural design and performance evaluation of Ti6Al4V/5%Cu produced by electron–beam additive technology with simultaneous double–wire feeding, Materials Letters, 2022, vol. 312, p. 131586. https://doi.org/10.1016/j.matlet.2021.13158610.1016/j.matlet.2021.131586 ↗
62. Osipovich, K., Gurianov, D., Vorontsov, A., Knyazhev, E., Panfilov, A., Chumaevskii, A., Savchenko, N., Nikonov, S., Rubtsov, V., and Kolubaev, E., Phase formation, microstructure, and mechanical properties of Ni-Cu bimetallic materials produced by electron beam additive manufacturing, Metals, 2022, vol. 12, p. 1931. https://doi.org/10.3390/met1211193110.3390/met12111931 ↗
63. Osipovich, K.S., Astafurova, E.G., Chumaevskii, A.V., Kalashnikov, K.N., Astafurov, S.V., Maier, G.G., Melnikov, E.V., Moskvina, V.A., Panchenko, M.Yu., Tarasov, S.Yu., Rubtsov, V.E., and Kolubaev, E.A., Gradient transition zone structure in “steel–copper” sample produced by double wire–feed electron beam additive manufacturing, Journal of Materials Science, 2020, vol. 55, pp. 9258–9272. https://doi.org/10.1007/s10853-020-04549-y10.1007/s10853-020-04549-y ↗
64. Fortuna, S.V., Gurianov, D.A., Kalashnikov, K.N., Chumaevskii, A.V., Mironov, Yu.P., and Kolubaev, E.A., Directional Solidification of a Nickel–Based Superalloy Product Structure Fabricated on Stainless Steel Substrate by Electron Beam Additive Manufacturing, Metallurgical and Materials Transactions A, 2021, vol. 52, pp. 857–870. https://doi.org/10.1007/s11661-020-06090-810.1007/s11661-020-06090-8 ↗
65. Filippov, A., Shamarin, N., Moskvichev, E., Savchenko, N., Kolubaev, E., Khoroshko, E., and Tarasov, S., Heat input effect on microstructure and mechanical properties of electron beam additive manufactured (EBAM) Cu-7.5wt.%Al bronze, Materials, 2021, vol. 14, p. 6948. https://doi.org/10.3390/ma1422694810.3390/ma14226948 ↗
66. Kibitkin, V., Vorontsov, A., Osipovich, K., Shamarin, N., Chumaevskii, A., Rubtsov, V., Moskvichev, E., Savchenko, N., and Kolubaev, E., Characterizing the tensile behavior of double wire–feed electron beam additive manufactured “copper–steel” using digital image correlation, Metals, 2022, vol. 12, p. 1797. https://doi.org/10.3390/met1211179710.3390/met12111797 ↗
67. Chumaevskii, A.V., Kolubaev, E.A., Osipovich, K.S., Gurianov, D.A., Rubtsov, V.E., Nikonov, S.Yu., and Boltrushevich, A.E., Obtaining of bimetallic product from nickel superalloy and heat–resistant bronze by wire–feed electron beam additive manufacturing, Russian Physics Journal, 2022, vol. 65, pp. 1231–1238. https://doi.org/10.1007/s11182-022-02756-510.1007/s11182-022-02756-5 ↗
68. Fortuna, S., Gurianov, D., Nikonov, S., Osipovich, K., and Kolubaev, E., On the control of elemental composition, macro-, and microstructure of directionally solidified additive products from nickel–based alloy, Metals, 2023, vol. 13, p. 1457. https://doi.org/10.3390/met1308145710.3390/met13081457 ↗
69. Kryucheva, K.D., Utilova, E.A., and Prijmak, E.Y., Analysis of microstructures and formation of butt welded joints on bimetallic pipes at rotary welding friction, Physical Mesomechanics. Multilevel Materials Hierarchically Organized Structure and Intellectual Production Technologies: Theses Reports International Conference, 2024, pp. 449–450. https://www.elibrary.ru/item.asp?id=72653731&pff=1
70. DebRoy, T., Bhadeshia, H.K.D.H., Williams, R.J., McNelley, T., Milewski, J.O., and Sutton, M.A., Additive Manufacturing of Metallic Components–Process, Structure and Properties, Progress in Materials Science, 2018, vol. 92, pp. 112–224. https://doi.org/10.1016/j.pmatsci.2017.10.00110.1016/j.pmatsci.2017.10.001 ↗
71. Tarasov, S.Y., Filippov, A.V., Savchenko, N.L., Fortuna, S.V., Rubtsov, V.E., Kolubaev, E.A., and Psakhie, S.G., Effect of heat input on phase content, crystalline lattice parameter, and residual strain in wire–feed electron beam additive manufactured 304 stainless steel, The International Journal of Advanced Manufacturing Technology, 2018, vol. 99, pp. 2353–2363. https://doi.org/10.1007/s00170-018-2643-010.1007/s00170-018-2643-0 ↗
72. Semenchuk, V.M., Nikolaeva, A.V., Savchenko, N.L., Zykova, A.P., Chumaevskii, A.V., and Nikonov, S.Yu., Structure and Phase Composition of the Joint Zone of an Electron Beam Additively Manufactured Product from Stainless Steel and Copper Alloy, Russian Physics Journal, 2024, vol. 66, pp. 1180–1188. https://doi.org/10.1007/s11182-02303060-610.1007/s11182-02303060-6 ↗
73. Vorontsov, A., Astafurov, S., Melnikov, E., Moskvina, V., Kolubaev, E., and Astafurova, E., The microstructure, phase composition and tensile properties of austenitic stainless steel in a wire–feed electron beam melting combined with ultrasonic vibration, Materials Science and Engineering: A, 2021, vol. 820, p. 141519. https://doi.org/10.1016/j.msea.2021.14151910.1016/j.msea.2021.141519 ↗
74. Nikolaeva, A., Zykova, A., Chumaevskii, A., Vorontsov, A., Knyazhev, E., Moskvichev, E., Gurianov, D., Utyaganova, V., Savchenko, N., and Tarasov, S., Characterization of hypereutectoid Ti6Al4V–Cu alloys fabricated using electron beam additive manufacturing, Metals and Materials International, 2024, vol. 30, pp. 1584–1609. https://doi.org/10.1007/s12540-023-01590-910.1007/s12540-023-01590-9 ↗
75. Gurianov, D., Fortuna, S., Nikonov, S., Kolubaev, E., and Chumaevskii, A., Macro- and microstructural homogeneity of nickel–based superalloy product material obtained by wire–feed electron beam additive manufacturing, Izvestiya of Altai State University, 2023, vol. 132, pp. 33–39. https://doi.org/10.14258/izvasu(2023)4-0410.14258/izvasu(2023)4-04 ↗
76. Fortuna, S.V., Gurianov, D.A., Sokolov, P.S., and Fortuna, A.S., To the method of manufacturing filaments for electron–beam additive technology from casting and hardly deformable metallic materials, AIP Conference Proceedings, 2020, vol. 2310, p. 020102. https://doi.org/10.1063/5.003408610.1063/5.0034086 ↗
77. Fortuna, S.V., Influence of conditions local metallurgy on directed crystallization of nickel alloy in wire and electron beam additive formation, *Research and Development Report No. 22-22-00891*, Russian Scientific Foundation, 2022.
78. Sharma, H., Singla, J., Singh, V., Singh, J., Kumar, H., Bansal, A., Singla, A.K., Goyal, D.K., and Gupta, M.K., Influence of post heat treatment on metallurgical, mechanical, and corrosion analysis of wire arc additive manufactured inconel 625, Journal of Materials Research and Technology, 2023, vol. 27, pp. 5910–5923. https://doi.org/10.1016/j.jmrt.2023.11.07410.1016/j.jmrt.2023.11.074 ↗
79. Junwen, J., Zavdoveev, A., Vedel, D., Baudin, T., Motrunich, S., Klochkov, I., Friederichs, S., Strelenko, N., and Skoryk, M., CMT–based wire arc additive manufacturing of Inconel 625 alloy, Emerging Materials Research, 2023, vol. 12, pp. 315–322. https://doi.org/10.1680/jemmr.23.0005310.1680/jemmr.23.00053 ↗
80. Filippov, A., Utyaganova, V., Shamarin, N., Vorontsov, A., Savchenko, N., Gurianov, D., Chumaevskii, A., Rubtsov, V., Kolubaev, E., and Tarasov, S., Microstructure and corrosion resistance of AA4047/AA7075 transition zone formed using electron beam wire–feed additive manufacturing, Materials, 2021, vol. 14, p. 6931. https://doi.org/10.3390/ma1422693110.3390/ma14226931 ↗
81. Utyaganova, V., Filippov, A., Tarasov, S., Shamarin, N., Gurianov, D., Vorontsov, A., Chumaevskii, A., Fortuna, S., Savchenko, N., Rubtsov, V., and Kolubaev, E., Characterization of AA7075/AA5356 gradient transition zone in an electron beam wire–feed additive manufactured sample, Materials Characterization, 2021, vol. 172, p. 110867. https://doi.org/10.1016/j.matchar.2020.11086710.1016/j.matchar.2020.110867 ↗
82. Pan, J., Yuan, B., Ge, J., Ren, Y., Chen, H., Zhang, L., and Lu, H., Influence of arc mode on the microstructure and mechanical properties of 5356 aluminum alloy fabricated by wire arc additive manufacturing, Journal of Materials Research and Technology, 2022, vol. 20, pp. 1893–1907. https://doi.org/10.1016/j.jmrt.2022.08.00510.1016/j.jmrt.2022.08.005 ↗
83. Kalashnikova, T., Chumaevskii, A., Kalashnikov, K., Knyazhev, E., Gurianov, D., Panfilov, A., Nikonov, S., Rubtsov, V., and Kolubaev, E., Regularities of friction stir processing hardening of aluminum alloy products made by wire–feed electron beam additive manufacturing, Metals, 2022, vol. 12, p. 183. https://doi.org/10.3390/met1202018310.3390/met12020183 ↗
84. Osipovich, K.O., Sidorov, E.A., Chumaevskii, A.V., Nikonov, S.N., and Kolubaev, E.A., Manufacturing conditions of bimetallic samples based on iron and copper alloys by wire–feed electron beam additive manufacturing, Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty). Metal Working and Material Science, 2025, vol. 27, no. 2, pp. 142–158. https://doi.org/10.17212/1994-6309-2025-27.2-142-15810.17212/1994-6309-2025-27.2-142-158 ↗
85. Osipovich, K.S., Chumaevskii, A.V., Knyazhev, E.O., and Kolubaev, E.A., Tribological behavior under adhesion and dry friction conditions of copper–steel composites manufactured by wire–feed electron beam additive technology, Russian Physics Journal, 2024, vol. 67, pp. 2018–2025. https://doi.org/10.1007/s11182-024-03340-910.1007/s11182-024-03340-9 ↗
86. Gusarova, A., Kalashnikova, T., Gurianov, D., Chumaevskii, A., Osipovich, K., Rubtsov, V.E., Kushnarev, Y., and Zykova, A., Fabrication of conically shaped CuCr1 chrome bronze products by wire–feed electron beam additive manufacturing, Materials Science Forum, 2022, vol. 1049, pp. 24–30. https://doi.org/10.4028/www.scientific.net/MSF.1049.2410.4028/www.scientific.net/MSF.1049.24 ↗
87. Zykova, A., Panfilov, A., Chumaevskii, A., Vorontsov, A., Moskvichev, E., Nikonov, S., Gurianov, D., Savchenko, N., Kolubaev, E., and Tarasov, S., In-situ dispersion hardened aluminum bronze/steel composites prepared using a double wire electron beam additive manufacturing, Progress in Additive Manufacturing, 2023, vol. 8, pp. 1067–1081. https://doi.org/10.1007/s40964-022-00378-410.1007/s40964-022-00378-4 ↗
88. Zykova, A.P., Panfilov, A.O., Chumaevskii, A.V., Vorontsov, A.V., and Tarasov, S.Y., Electron beam additive manufacturing of composite alloy from stainless steel and aluminum bronze: Microstructure and mechanical properties, Izvestiya Ferrous Metallurgy, 2023, vol. 66, pp. 197–205. https://doi.org/10.17073/0368-0797-2023-2-197-20510.17073/0368-0797-2023-2-197-205 ↗
89. Kalashnikov, K., Kalashnikova, T., Semenchuk, V., Knyazhev, E., Panfilov, A., Cheremnov, A., Chumaevskii, A., Nikonov, S., Vorontsov, A., Rubtsov, V., and Kolubaev, E., Development of a multimaterial structure based on CuAl9Mn2 bronze and Inconel 625 alloy by double–wire–feed additive manufacturing, Metals, 2022, vol. 12, p. 2048. https://doi.org/10.3390/met1212204810.3390/met12122048 ↗
90. Osipovich, K.S., Knyazhev, E.O., Chumaevskii, A.V., Nikonov, S.Yu., and Kolubaev, E.A., Influence of friction surface direction of the heterogeneous composites based on Cu-Fe for tribological and mechanical behavior, Russian Physics Journal, 2022, vol. 65, pp. 1404–1410. https://doi.org/10.1007/s11182-023-02783-w10.1007/s11182-023-02783-w ↗
91. Chumaevskii, A., Osipovich, K., Senemchuk, V., Tarasov, S., and Kolubaev, E., Peculiarities of obtaining and organizing the structure of large–size functional–gradient bimetallic elements based on stainless steel and copper by wire–feed electron beam additive manufacturing, Bulletin of the Siberian State Industrial University, 2024, vol. 1, pp. 47–57. https://doi.org/10.57070/2304-4497-2024-1(47)-47-5710.57070/2304-4497-2024-1(47)-47-57 ↗
92. Chumaevskii, A.V., Panfilov, A.O., Cheremnov, A.M., Osipovich, K.S., Zykova, A.P., Utyaganova, V.R., Gusarova, A.V., Knjazhev, E.O., Vorontsov, A.V., Nikonov, S.Yu., Rubtsov, V.E., and Kolubaev, E.A., Regularities of structure formation of composite materials based on ferrite–pearlite steel and aluminum–manganese bronze by wire–feed electron beam additive manufacturing, Russian Physics Journal, 2023, vol. 66, pp. 1087–1096. https://doi.org/10.1007/s11182-023-03048-210.1007/s11182-023-03048-2 ↗
93. Zykova, A., Chumaevskii, A., Panfilov, A., Vorontsov, A., Nikolaeva, A., Osipovich, K., Gusarova, A., Chebodaeva, V., Nikonov, S., Gurianov, D., Filippov, A., Dobrovolsky, A., Kolubaev, E., and Tarasov, S., Aluminum bronze/ Udimet 500 composites prepared by electron–beam additive double–wire–feed manufacturing, Materials, 2022, vol. 15, p. 6270. https://doi.org/10.3390/ma1518627010.3390/ma15186270 ↗
94. Kushnarev, Y.V., Semenchuk, V.M., Chumaevskii, A.V., Osipovich, K.S., Rubtsov, V.E., and Kolubaev, E.A., Production of experimental samples of nickel–based alloy and copper nozzles by electron beam additive manufacturing, Russian Physics Journal, 2024, vol. 67, pp. 419–426. https://doi.org/10.1007/s11182-024-03139-810.1007/s11182-024-03139-8 ↗
95. Panfilov, A.O., Zykova, A.P., Chumaevskii, A.V., Vorontsov, A.V., Nikonov, S.Y., and Kolubaev, E.A., Influence of the gradient zone extent of the functional gradient product of the Cu/Al system on the structural–phase state and mechanical properties, Bulletin of the Siberian State Industrial University, 2022, vol. 42, pp. 61–73. https://doi.org/10.57070/2304-4497-2022-4(42)-61-7310.57070/2304-4497-2022-4(42)-61-73 ↗
96. Dobrovolskii, A., Chumaevskii, A., Zykova, A., Savchenko, N., Gurianov, D., Nikolaeva, A., Semenchuk, N., Nikonov, S., Sokolov, P., Rubtsov, V., and Kolubaev, E., Al–Al3Ni in situ composite formation by wire–feed electron–beam additive manufacturing, Materials, 2023, vol. 16, p. 4157. https://doi.org/10.3390/ma1611415710.3390/ma16114157 ↗
97. Zykova, A., Nikolaeva, A., Panfilov, A., Vorontsov, A., Nikonenko, A., Dobrovolsky, A., Chumaevskii, A., Gurianov, D., Filippov, A., Semenchuk, N., Savchenko, N., Kolubaev, E., and Tarasov, S., Microstructures and phases in electron beam additively manufactured Ti-Al-Mo-Zr-V/CuAl9Mn2 alloy, Materials, 2023, vol. 16, p. 4279. https://doi.org/10.3390/ma1612427910.3390/ma16124279 ↗
98. Gurianov, D., Fortuna, S., Tarasov, S., Semenchuk, V., Shamarin, N., Chumaevskii, A., Rubtsov, V., Korsunsky, A.M., and Kolubaev, E., The Comparison of Microstructure, Phase Composition and Mechanical Properties of Inconel 625 Alloys Obtained by Wire Arc and Wire Electron Beam Additive Manufacturing, Crystals, 2025, vol. 15, p. 848. https://doi.org/10.3390/cryst1510084810.3390/cryst15100848 ↗
99. Nikolaeva, A., Zykova, A., Vorontsov, A., Panfilov, A., Kuzminov, E., Gurianov, D., Gusarenko, A., Savchenko, N., Kolubaev, E., and Tarasov, S., Microstructure and Strength Evolution in Ti4Al3V-xFe Alloys Obtained by Dual–Wire Electron Beam Additive Manufacturing, Met. Mater. Int., 2025. https://doi.org/10.1007/s12540-025-02106-310.1007/s12540-025-02106-3 ↗
100. Vorontsov, A., Zykova, A., Gurianov, D., Shamarin, N., Panfilov, A., Chumaevskii, A., Kalashnikov, K., Kolubaev, E., and Savchenko, N., Mechanical Properties of Dispersion–Strengthened Iron–Based W+WC(Ni) Composite Produced by Combined Wire Electron–Beam Manufacturing with Powder Addition, Journal of Composites Science, 2025, vol. 9, no. 4, p. 144. https://doi.org/10.3390/jcs904014410.3390/jcs9040144 ↗