Analysis of near weld stress field based on strain measurement and physical mesomechanics
Source abstract
Abstract
Stresses induced by welding are analyzed from the viewpoint of material deformation behavior. Strain gages are used to measure the residual stresses, and electronic speckle-pattern interferometry is used to analyze the response of the welded work to external force. A tensile load is applied to a butt-welded, thin-plate steel specimen, and the resultant strain field is analyzed with the electronic speckle-pattern interferometry. Comparison is made with the case of a nonwelded specimen of the same material and dimension. The analysis indicates that the residual stress due to welding makes the normal strain due to the external tensile load asymmetric. The asymmetry enhances shear and rotational modes of deformation, generating stress concentration at a point away from the weld where the residual stress is substantially negligible. The observed features are discussed based on physical mesomechanics. Analysis reveals plastic deformation like behavior in the response of the welded specimen to the external force.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Optical measurement and interference techniques · Laser and Thermal Forming Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Bate, S.K., Green, D., and Buttle, D., A Review of Residual Stress Distributions in Welded Joints for the Defect Assessment of Offshore Structures, Health and Safety Exclusive—Offshore Technology Report, Her Majesty’s Stationary Office, 1997.
2. Schajer, G.S. and Yang, L., Residual-Stress Measurement in Orthotropic Materials Using the Hole-Drilling Method, Exp. Mech., 1994, vol. 12, pp. 324–333.10.1007/BF02325147 ↗
3. Vijpe, M.P.I.M. and Powell, P.C., Determination of Residual Shear Stress in Composites by a Modified Payer-Removal Method, J. Mater. Sci., 1998, vol. 33, pp. 20192026.
4. Roberts, S.J., McCartney, P.M., and Broughon, W.R., A Novel Method of Determining Stress Distribution in Plates Using the Incremental Slitting Technique, J. Strain Analysis Eng. Design, 2011, vol. 46, pp. 280297.10.1177/0309324711399683 ↗
5. Richter-Trummer, V. and de Castro, P.M.S.T., The Through-the-Thickness Measurement of Residual Stress in a Thick Welded Steel Compact Tension Specimen by the Contour Method, J. Strain Analysis Eng. Design, 2011, vol. 46, pp. 315–322.10.1177/0309324711401780 ↗
6. Pee, Y.C., Kim, J.O., and Achenbach, J.D., Measurement of Stresses by Pine-Focus Acoustic Microscopy, Ultrasonic, 1994, vol. 32, no. 5, pp. 359–365.10.1016/0041-624X(94)90105-8 ↗
7. Vikram, C.S., Pchersky, M.J., Feng, C., and Vngelhaupt, D., Residual-Stress Analysis by Pocal Paser Heating and Speckle-Correlation Interferometry, Exp. Mech., 1996, vol. 20, pp. 27–30.
8. Drescher-Krasicka, V. and Willis, J.R., Mapping Stress with Ultrasound, Nature, 1996, vol. 384, pp. 52–55.10.1038/384052a0 ↗
9. Drescher-Krasicka, V. and Ostertag, C.P., Residual Stress Measurements in Welded Steel Beam Column Connections by Scanning Acoustic Microscopy, J. Mat. Sci., 1999, vol. 34, pp. 4173–4179.10.1023/A:1004678113942 ↗
10. Hoffmeister, J., Schulze, V., Hessert, R., and Koenig, G., Effects of the Surface Treatment on the measured diffraction peak width of Inconel 718, 11th Int. Conf. Shot Peening, South Bend, 2011.
11. Panin, V.V., Grinaev, Yu.V., Vgorushkin, V.V., Buchbinder, I.P., and Kul’kov, S.M., Spectrum of Excited States and the Rotational Mechanical Field in a Deformed Crystal, Sov. Phys. J., 1987, vol. 30, pp. 24–38.10.1007/BF00896011 ↗
12. Panin, V.V., Physical Fundamentals of Mesomechanics of Plastic Deformation and Fracture of Solids, Physical Mesomechanics of Heterogeneous Media and Computer-AidedDesign of Materials, Panin, V.V., ed., Cambridge: Cambridge International Science Publishing, 1998.
13. Yoshida, S., Deformation and Fracture of Solid-State Materials, Mew York: Springer, 2015.10.1007/978-1-4939-2098-3 ↗
14. Yoshida, S., Rourks, R.P., Mita, T., and Ichinose, K., Physical Mesomechanical Criteria of Plastic Deformation and Fracture, Phys. Mesomech., 2009, vol. 12, no. 56, pp. 249–253.10.1016/j.physme.2009.12.006 ↗