Evolution of Mesoscopic Deformation-Induced Surface Roughness and Local Strains in Tensile Polycrystalline Aluminum
Source abstract
Abstract
This paper experimentally investigates the process of deformation-induced mesoscopic surface roughening in commercially pure aluminum under uniaxial tension. Surface profiles are recorded in selected observation areas at different stages of stretching using a contact profilometer. It is shown that multiscale undulations are formed on the surface from the very beginning of plastic deformation and evolve during stretching. The undulations formed due to the collective displacement of 10–15 grains make the greatest contribution to roughening. A quantitative assessment and comparison of the behavior of mesoscopic undulations are carried out using a dimensionless parameter of the degree of roughness, which is the ratio of profile length to evaluation length, determined for the obtained surface profiles in the studied strain range. A correlation between the roughness degree and local plastic strains is established.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Advanced Surface Polishing Techniques · Adhesion, Friction, and Surface Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Zuev, L.B., Barannikova, S.A., Lunev, A.G., Kolosov, S.V., and Zharmukhambetova, A.M., Basic Relationships of the Autowave Model of a Plastic Flow, Russ. Phys. J., 2019, vol. 61, pp. 1709–1717. https://doi.org/10.1007/s11182-018-1591-310.1007/s11182-018-1591-3 ↗
2. Gorodetskyi, O., Hütter, M., and Geers, M.G.D., Detecting Precursors of Localization by Strain-Field Analysis, Mech. Mater., 2017, vol. 110, pp. 84–97. https://doi.org/10.1016/j.mechmat.2017.05.00110.1016/j.mechmat.2017.05.001 ↗
3. Erofeev, V.I., Ilyakhinsky, A.V., Nikitina, E.A., Pakhomov, P.A., and Rodyushkin, V.M., Ultrasonic Sensing Method for Evaluating the Limit State of Metal Structures Associated with the Onset of Plastic Deformation, Phys. Mesomech., 2020, vol. 23, no. 3, pp. 241–245. https://doi.org/10.1134/S102995992003008X10.1134/S102995992003008X ↗
4. Burkov, M.V., Eremin, A.V., Lyubutin, P.S., Byakov, A.V., and Panin, S.V., Applying an Ultrasonic Lamb Wave Based Technique to Testing the Condition of V96ts3T12 Aluminum Alloy, Russ. J. Nondestruct. Test., 2017, vol. 53. pp. 817–829. https://doi.org/10.1134/S106183091712003810.1134/S1061830917120038 ↗
5. Strzalka, C. and Zehn, M., The Influence of Loading Position in a Priori High Stress Detection Using Mode Superposition, Rep. Mech. Eng., 2020, vol. 1, no. 1, pp. 93–102. https://doi.org/10.31181/rme200101093s10.31181/rme200101093s ↗
6. Fragassa, C., Minak, G., and Pavlovic, A., Measuring Deformations in the Telescopic Boom under Static and Dynamic Load Conditions, Facta Univ. Mech. Eng., 2020, vol. 18, no. 2, pp. 315–328. https://doi.org/10.22190/FUME181201001F10.22190/FUME181201001F ↗
7. Saravanakumar, K., Lakshminarayanan, B.S., Arumugam, V., Santulli, C., Pavlovic, A., and Fragassa, C., Quasi-Static Indentation Behavior of GFRP with Milled Glass Fiber Filler Monitored by Acoustic Emission, Facta Univ. Mech. Eng., 2019, vol. 17, no. 3, pp. 425–443. https://doi.org/10.22190/FUME181204004S10.22190/FUME181204004S ↗
8. Wang, K., Carsley, J.E., He, B., Li, J., and Zhang, L., Measuring Forming Limit Strains with Digital Image Correlation Analysis, J. Mater. Process. Tech., 2014, vol. 214, pp. 1120–1130. https://doi.org/10.1016/j.jmatprotec.2014.01.00110.1016/j.jmatprotec.2014.01.001 ↗
9. Paul, S.K., Roy, S., Sivaprasad, S., and Tarafder, S., Forming Limit Diagram Generation from In-Plane Uniaxial and Notch Tensile Test with Local Strain Measurement through Digital Image Correlation, Phys. Mesomech., 2019, vol. 22, no. 4, pp. 340–344. https://doi.org/10.1134/S102995991904010610.1134/S1029959919040106 ↗
10. Brlić, T., Rešković, S., Jurković, Z., and Janeš, G., Mathematical Modeling of the Influence Parameters during Formation and Propagation of the Lüders Bands, Facta Univ. Mech. Eng., 2020, vol. 18, no. 4, pp. 595–610. https://doi.org/10.22190/FUME200416041B10.22190/FUME200416041B ↗
11. Panin, V.E. and Egorushkin, V.E., Deformable Solid as a Nonlinear Hierarchically Organized System, Phys. Mesomech., 2011, vol. 14, no. 5–6, pp. 207–223.10.1016/j.physme.2011.12.002 ↗
12. Panin, V.E., Strain-Induced Defects in Solids at the Different Scale Levels of Plastic Deformation and the Nature of Their Sources, Mater. Sci. Eng. A, 2001, vol. 319–321, pp. 197–200.10.1016/S0921-5093(01)01778-6 ↗
13. Schmauder, S. and Schäfer, I., Multiscale Materials Modeling: Approaches to Full Multiscaling, Berlin: Walter de Gruyter GmbH & Co KG, 2016.10.1515/9783110412451 ↗
14. Panin, V.E., Overview on Mesomechanics of Plastic Deformation and Fracture of Solids, Theor. Appl. Fract. Mech., 1998, vol. 30, pp. 1–11.10.1016/S0167-8442(98)00038-X ↗
15. Shanyavskiy, A.A. and Soldatenkov, A.P., Scales of Metal Fatigue Limit, Phys. Mesomech., 2020, vol. 23, no. 2, pp. 120–127. https://doi.org/10.1134/S102995992002003410.1134/S1029959920020034 ↗
16. Botvina, L.R., Bolotnikov, A.I., and Sinev, I.O., Hierarchy of Microcracks under Cyclic and Static Loads, Phys. Mesomech., 2020, vol. 23, no. 6, pp. 466–476. https://doi.org/10.1134/S102995992006002810.1134/S1029959920060028 ↗
17. Makarov, P.V., Schmauder, S., Cherepanov, O.I., Smolin, I.Yu., Romanova, V.A., Balokhonov, R.R., Saraev, D.Yu., Soppa, E., Kizler, P., Fischer, G., Hu, S., and Ludwig, M., Simulation of Elastic Plastic Deformation and Fracture of Materials at Micro-, Meso- and Macrolevels, Theor. Appl. Fract. Mech., 2001, vol. 37, pp. 183–244.10.1016/S0167-8442(01)00078-7 ↗
18. Carpinteri, A. and Accornero, F., Rotation Versus Curvature Fractal Scaling in Bending Failure, Phys. Mesomech., 2019, vol. 22, no. 1, pp. 46–51. https://doi.org/10.1134/S102995991901008910.1134/S1029959919010089 ↗
19. Alfyorova, E.A. and Lychagin, D.V., Self-Organization of Plastic Deformation and Deformation Relief in FCC Single Crystals, Mech. Mater., 2018, vol. 117, pp. 202–213. https://doi.org/10.1016/j.mechmat.2017.11.01110.1016/j.mechmat.2017.11.011 ↗
20. Barkia, B., Doquet, V., Héripré, E., and Guillot, I., Characterization and Analysis of Deformation Heterogeneities in Commercial Purity Titanium, Mater. Charact., 2015, vol. 108, pp. 94–101. https://doi.org/10.1016/j.matchar.2015.09.00110.1016/j.matchar.2015.09.001 ↗
21. Romanova, V., Balokhonov, R., Emelianova, E., Sinyakova, E., and Kazachenok, M., Early Prediction of Macroscale Plastic Strain Localization in Titanium from Observation of Mesoscale Surface Roughening, Int. J. Mech. Sci., 2019, vol. 161–162. https://doi.org/10.1016/j.ijmecsci.2019.10504710.1016/j.ijmecsci.2019.105047 ↗
22. Romanova, V., Balokhonov, R., Panin, A., Kazachenok, M., and Kozelskaya, A., Micro- and Mesomechanical Aspects of Deformation-Induced Surface Roughening in Polycrystalline Titanium, Mater. Sci. Eng. A, 2017, vol. 697, pp. 248–258. https://doi.org/10.1016/j.engfailanal.2020.10443710.1016/j.engfailanal.2020.104437 ↗
23. Romanova, V., Balokhonov, R., Emelianova, E., Pisarev, M., and Dymnich, E., Numerical Study of the Texture Effect on Deformation-Induced Surface Roughening in Titanium Polycrystals, Eng. Fail. Anal., 2020, vol. 110. https://doi.org/10.1016/j.engfailanal.2020.10443710.1016/j.engfailanal.2020.104437 ↗
24. Romanova, V.A., Balokhonov, R.R., and Schmauder, S., Numerical Study of Mesoscale Surface Roughening in Aluminum Polycrystals under Tension, Mater. Sci. Eng. A, 2013, vol. 564, pp. 255–263. https://doi.org/10.1016/j.msea.2012.12.00410.1016/j.msea.2012.12.004 ↗
25. Panin, V.E., Surikova, N.S., Elsukova, T.F., Vlasov, I.V., and Borisyuk, D.V., Grain Boundary Sliding and Rotational Mechanisms of Intragranular Deformation at Different Creep Stages of High-Purity Aluminum Polycrystals at Various Temperatures and Stresses, Mater. Sci. Eng. A, 2018, vol. 733, pp. 276–284. https://doi.org/10.1016/j.msea.2018.07.03810.1016/j.msea.2018.07.038 ↗
26. Raabe, D., Sachtleber, M., Weiland, H., Scheele, G., and Zhao, Z., Grain-Scale Micromechanics of Polycrystal Surfaces during Plastic Straining, Acta Mater., 2003, vol. 51, pp. 1539–1560. https://doi.org/10.1016/S1359-6454(02)00557-810.1016/S1359-6454(02)00557-8 ↗
27. Miranda-Medina, M.L., Somkuti, P., Bianchi, D., Cihak-Bayr, U., Bader, D., Jech, M., and Vernes, A., Characterisation of Orange Peel on Highly Polished Steel Surfaces, Surf. Eng., 2015, vol. 31, pp. 519–525.10.1179/1743294414Y.0000000407 ↗
28. Stoudt, M.R., Levine, L.E., Creuziger, A., and Hubbard, J.B., The Fundamental Relationships between Grain Orientation, Deformation-Induced Surface Roughness and Strain Localization in an Aluminum Alloy, Mater. Sci. Eng. A, 2011, vol. 530, pp. 107–116. https://doi.org/10.1016/j.msea.2011.09.05010.1016/j.msea.2011.09.050 ↗
29. Wouters, O., Vellinga, W.P., van Tijum, R., and De Hosson, J.T.M., Effects of Crystal Structure and Grain Orientation on the Roughness of Deformed Polycrystalline Metals, Acta Mater., 2006, vol. 54, pp. 2813–2821. https://doi.org/10.1016/j.actamat.2006.02.02310.1016/j.actamat.2006.02.023 ↗
30. Panin, V.E. and Panin, S.V., Mesoscale Plastic Deformation of Aluminum Polycrystals, Russ. Phys. J., 1997, vol. 40, no. 1, pp. 28–34.10.1007/BF02806302 ↗
31. ISO 8785 Surface Imperfections—Terms, Definitions, and Parameters. International Organization for Standardization, Geneva, Switzerland, 1998.
32. Kryvyi, P., Dzyura, V., Maruschak, P., Panin, S., Lyashuk, O., and Vlasov, I., Influence of Curvature and Cross-Sectional Shape of Cylindrical Surface Formed by Turning on Its Roughness, Arab. J. Sci. Eng., 2020, vol. 45, pp. 5615–5622. https://doi.org/10.1007/s13369-020-04512-810.1007/s13369-020-04512-8 ↗
33. Li, Yu.V. and Barannikova, S.A., In Situ DIC Observation of Plastic Strain Increment in Low-Carbon Steel, Metallurgia, 2021, vol. 60, no. 1–2, pp. 55–58.