Microstructure and mechanical properties of inertia friction welded joints between alloy steel 42CrMo and cast Ni-based superalloy K418
Source abstract
Abstract
Abstract The alloy steel 42CrMo and the cast Ni-based superalloy K418 were successfully joined by inertia friction welding. The effects of the initial flywheel kinetic energy on the microstructure and mechanical properties of the joints were investigated. The results showed that inertia friction welding is a rapid and efficient way to achieve metallurgical bonding between 42CrMo and K418. Intermetallic compounds Fe0.64Ni0.36, Ni–Fe–Cr, Ni3 (Al, Ti) and MC-type carbides like NbC and TiC were observed at the interface containing a diffusion layer because of element diffusion. Elemental distribution analysis indicated that Fe and Ni were intermixed at the interface. The maximum tensile strength of the dissimilar 42CrMo/K418 joint was 772.19 MPa. Tensile fracture was identified to have occurred on the K418 side with brittle fracture features at an initial flywheel kinetic energy of 50.6 kJ. The origin and expansion of the cracks were mainly attributed to the MC carbides.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Advanced Welding Techniques Analysis · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Research on laser welding of cast Ni-based superalloy K418 turbo disk and alloy steel 42CrMo shaft10.1016/j.jallcom.2006.11.152 ↗
2. Mechanical properties and dynamic constitutive model of 42CrMo steel10.1016/j.matdes.2017.01.066 ↗
3. Solidification characteristics and segregation behavior of Ni-based superalloy K418 for auto turbocharger turbine10.1016/j.jallcom.2013.03.241 ↗
4. Transmission electron microscopy characterization of laser welding cast Ni-based superalloy K418 turbo disk and alloy steel 42CrMo shaft10.1016/j.jallcom.2007.07.079 ↗
5. Pang Ming · 2009 · 1
6. The formation and control of laves phase in k418 and 42crmo dissimilar metal laser weld10.4028/www.scientific.net/AMM.166-169.1839 ↗
7. Interfacial evolution of explosively welded titanium/steel joint under subsequent EBW process10.1016/j.jmatprotec.2018.05.031 ↗
8. Modeling of upset and torsional moment during inertia friction welding10.1016/j.jmatprotec.2015.07.024 ↗
9. Inertia-friction welding of an advanced rapidly solidified titanium alloy10.1007/BF00735692 ↗
10. Microstructure and mechanical properties of dissimilar inertia friction welding of 7A04 aluminum alloy to AZ31 magnesium alloy10.1016/j.jallcom.2016.11.218 ↗
11. Inertia friction welding of dissimilar superalloys mar-m247 and LSHR10.1007/s11661-014-2512-x ↗
12. Microstructure-based strength distribution across the welds of nickel-based superalloy Inconel 751 and austenite steel 21-4N joined by inertia friction welding10.1007/s11663-013-9795-y ↗
13. Inertia and friction welding of type 1100 aluminum to type 316 stainless steel
14. Joining of stainless-steel and aluminium materials by friction welding10.1007/s00170-008-1492-7 ↗
15. Dissimilar friction welding of 6061-T6 aluminum and AISI 1018 steel: properties and microstructural characterization10.1016/j.matdes.2009.12.010 ↗
16. A new current hybrid inertia friction welding for nickel-based superalloy K418–alloy steel 42CrMo dissimilar metals10.1007/s00170-013-5441-8 ↗
17. Efficiency of the inertia friction welding process and its dependence on process parameters10.1007/s11661-017-4115-9 ↗
18. Effect of process parameters on process efficiency and inertia friction welding behavior of the superalloys LSHR and Mar-M24710.1016/j.jmatprotec.2017.07.020 ↗
19. Linear friction welding of aluminium to copper10.1179/1362171812Y.0000000010 ↗
20. Evaluation of the metallurgical and mechanical properties of friction-welded joints of dissimilar metal combinations AISI2205/Cu10.1007/s00170-012-4325-7 ↗
21. The effects of casting and forging processes on joint properties in friction-welded AISI 1050 and AISI 304 steels10.1007/s00170-008-1810-0 ↗
22. An assessment of hardness, impact strength, and hot corrosion behaviour of friction-welded dissimilar weldments between AISI 4140 and AISI 30410.1007/s00170-007-1266-7 ↗
23. Microstructure evolution and mechanical properties of rotary friction welded TC4/SUS321 joints at various rotation speeds10.1016/j.matdes.2016.03.037 ↗
24. Brittle fracture of gas turbine blade caused by the formation of primary β-NiAl phase in Ni-base superalloy10.1016/j.engfailanal.2012.07.014 ↗