Development of an Earing Model with Consideration for the Crystallographic Texture of Sheet Metal During Axisymmetric Drawing
Source abstract
Abstract
Abstract A calculation model is developed for earing during cylindrical drawing of metallic materials, which is based on the phenomenological criterion of plasticity taking into account the crystallographic texture of the material. The model was verified by comparing the calculated earing defects with those observed in drawing tests on an aluminum preform. Further modeling shows that deformation orientations ({112}<111>, {110}<112>, {123}<634>, and {100}<011>) lead to earing at an angle of 45° to the rolling direction, while recrystallization orientations ({100}<001> and {110}<001>) lead to earing in the rolling and transverse directions. Crystallographic orientation {110}<001> gives maximum earing, while orientation {123}<634> causes minimum one. In all the cases, the contribution of plastic anisotropy and yield stress anisotropy to earing is almost the same, with a slight predominance of the latter. The earing behavior is shown by the example of materials with a two-component ({112}<111> + {100}<001) texture: as the fraction of the {112}<111> orientation grows, ears in the rolling and transverse directions are reduced, while they form at an angle of 45° to the rolling direction. Considering such influence, the earing coefficient is minimum at 55–60% of the {112}<111> component.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Shveikin, A.I., Vshivkova, A.A., and Trusov, P.V., Methods of Account for Temperature and Strain Rate Variation in Multilevel Constitutive Models of Metal Deformation (Analytical Review), Physical Mesomechanics, 2024, vol. 27, no. 2, pp. 133–151. https://doi.org/10.1134/S102995992402003610.1134/S1029959924020036 ↗
2. Balokhonov, R.R., Sergeev, M.V., and Romanova, V.A., Simulation of Deformation and Fracture in Poly-crystalline Aluminum Alloy under Dynamic Loading, Physical Mesomechanics, 2023, vol. 26, no. 3, pp. 267–281. https://doi.org/10.1134/S102995992303003710.1134/S1029959923030037 ↗
3. Gribov, D.S. and Trusov, P.V., Three-Level Dislocation-Based Model for Describing the Deformation of Polycrystals: Structure, Implementation Algorithm, Examples for Studying Nonproportional Cyclic Loading, Physical Mesomechanics, 2022, vol. 25, no. 6, pp. 557–567. https://doi.org/10.1134/S102995992206008X10.1134/S102995992206008X ↗
4. Tashkinov, M.A. and Shalimov, A.S., Modeling the Effect of Microscale Morphological Parameters on the Deformation Behavior of Porous Materials with a Metal Matrix, Physical Mesomechanics, 2021, vol. 24, no. 5, pp. 618–624. https://doi.org/10.1134/S102995992105013110.1134/S1029959921050131 ↗
5. Grechnikov, F.V. and Erisov, Ya.A., Scientific Foundations for Creation of Sheet Materials with Specified Crystallography of Structure for Aerospace Applications, Metal Science and Heat Treatment, 2018, vol. 60, no. 1–2, pp. 13–17. https://doi.org/10.1007/s11041-018-0233-210.1007/s11041-018-0233-2 ↗
6. Grechnikov, F.V. and Erisov, Ya.A., Development of Yield Criteria for the Calculation of Forming High-Textured Anisotropic Blanks, Vestnik Samarskogo Gosudarstvennogo Aerokosmicheskogo Universiteta, 2012, vol. 1, no. 32, pp. 94–99. https://doi.org/10.18287/2541-7533-2012-0-1(32)-94-9910.18287/2541-7533-2012-0-1(32)-94-99 ↗
7. Gandin, C.A., Rappaz, M., West, D., and Adams, B.L., Grain Texture Evolution During the Columnar Growth of Dendritic Alloys, Metallurgical and Materials Transactions A, 1995, vol. 26, pp. 1543–1551. https://doi.org/10.1007/BF0264760510.1007/BF02647605 ↗
8. Farajollahi, R., Aval, H.J., and Jamaati, R., Evaluating of the Microstructure, Texture, аnd Mechanical Properties of AA2024-Al3NiCu Composites Fabricated by the Stir Casting Process, CIRP Journal of Manufacturing Science and Technology, 2022, vol. 37, pp. 204–218. https://doi.org/10.1016/j.cirpj.2022.01.01310.1016/j.cirpj.2022.01.013 ↗
9. Zhang, Y.X., Lan, M.F., Wang, Y., Fang, F., Lu, X., Yuan, G., and Wang, G.D., Microstructure and Texture Evolution of Thin-Gauge Non-Oriented Silicon Steel with High Permeability Produced by Twin-Roll Strip Casting, Materials Characterization, 2019, vol. 150, pp. 118–127. https://doi.org/10.1016/j.matchar.2019.02.00110.1016/j.matchar.2019.02.001 ↗
10. Kocks, U.F., Tomé, C.N., and Wenk, H.R., Texture and Anisotropy: Preferred Orientations in Polycrystals and Their Effect on Materials Properties, Cambridge: Cambridge University Press, 2000.
11. Gupta, A., Khatirkar, R., and Singh, J., A Review of Microstructure and Texture Evolution During Plastic Deformation and Heat Treatment of β-Ti Alloys, Journal of Alloys and Compounds, 2022, vol. 899, p. 163242. https://doi.org/10.1016/j.jallcom.2021.16324210.1016/j.jallcom.2021.163242 ↗
12. Ghosh, A. and Ghosh, M., Effect of Heat Treatment and Severe Plastic Deformation on Microstructure and Texture Evolution of 7075 Alloy, Materials Today: Proceedings, 2020, vol. 33, no. 8, pp. 5239–5242. https://doi.org/10.1016/j.matpr.2020.02.94710.1016/j.matpr.2020.02.947 ↗
13. Hamada, J.I. and Inoue, H., Texture and Planar Anisotropy of R-Value in Duplex Stainless Steel Sheet, Materials Transactions, 2010, vol. 51, no. 4, pp. 644–651. https://doi.org/10.2320/matertrans.MG20090810.2320/matertrans.MG200908 ↗
14. Grigoriev, A.K., Silnikova, E.F., and Pevzner, M.Z., Influence of Rolling Texture of Aluminum Alloys on The Size of Scallops Formed During Drawing, Russian Journal of Non-Ferrous Metals, 1983, no. 3, pp. 85–86.
15. Engler, O., Control of Texture and Earing in Aluminium Alloy AA 3105 Sheet for Packaging Applications, Materials Science and Engineering A, 2012, vol. 538, pp. 69–80. https://doi.org/10.1016/j.msea.2012.01.01510.1016/j.msea.2012.01.015 ↗
16. Cheng, P. and Yao, Y.L., The Influence of Sheet Metal Anisotropy on Laser Forming Process, Journal Of Manufacturing Science And Engineering, 2005, vol. 127, pp. 572–582. https://doi.org/10.1115/1.194962010.1115/1.1949620 ↗
17. Kuroda, M. and Yoshida, K., Correlation Between Texture and Formability of Aluminum Alloy Sheets: Crystal Plasticity Predictions, Journal of Japan Institute of Light Metals, 2010, vol. 12, pp. 504–509.
18. Banabic, D., Sheet Metal Forming Processes: Constitutive Modelling and Numerical Simulation, Heidelberg: Springer Science & Business Media, 2010. https://doi.org/10.1007/978-3-540-88113-110.1007/978-3-540-88113-1 ↗
19. Trusov, P.V. and Shveikin, A.I., Multilevel Models of Single-Crystal and Polycrystalline Materials: Theory, Algorithms, Examples of Application, Publ. House of SB RAS, Novosibirsk, 2019. https://doi.org/10.15372/MULTILEVEL2019TPV10.15372/MULTILEVEL2019TPV ↗
20. Shveikin, A.I., Ashikhmin, V.N., and Trusov, P.V., Models of Lattice Rotation during Metal Deformation, Vestnik PNIPU Mekhanika, 2010, no. 1, pp. 111–127. https://doi.org/10.1134/S102995991301003710.1134/S1029959913010037 ↗
21. Raabe, D., Roters, F., Barlat, F., and Chen, L.Q., Continuum Scale Simulation of Engineering Materials: Fundamentals-Microstructures-Process Applications, Weinheim: John Wiley & Sons, 2004.10.1002/3527603786 ↗
22. Habraken, A.M., Modelling the Plastic Anisotropy of Metals, Archives of Computational Methods in Engineering, 2004, vol. 11, pp. 3–96. https://doi.org/10.1007/BF0273621010.1007/BF02736210 ↗
23. Roters, F., Eisenlohr, P., Hantcherli, L., Tjahjanto, D.D., Bieler, T.R., and Raabe, D., Overview of Constitutive Laws, Kinematics, Homogenization and Multiscale Methods in Crystal Plasticity Finite-Element Modeling: Theory, Experiments, Applications, Acta Materialia, 2010, vol. 58, no. 4, pp. 1152–1211. https://doi.org/10.1016/j.actamat.2009.10.05810.1016/j.actamat.2009.10.058 ↗
24. Aryshenskii, E.V., Konovalov, S.V., Aryshenskii, V.Yu., and Beglov, E.D., Developing a Method for Mathematical Modeling of Texture Components during Rolling, Tsvetnye Mettaly, 2023, no. 6, pp. 65–72. https://doi.org/10.17580/tsm.2023.06.0910.17580/tsm.2023.06.09 ↗
25. Erisov, Y.A., Grechnikov, F.V., and Surudin, S.V., Yield Function of the Orthotropic Material Considering the Crystallographic Texture, Structural Engineering and Mechanics, 2016, vol. 58, no. 4, pp. 677–687. https://doi.org/10.12989/sem.2016.58.4.67710.12989/sem.2016.58.4.677 ↗
26. Romanovskii, V.P., Handbook of Cold Stamping, Mashinostroenie, Moscow, 1979.
27. Storozhev, M.V. and Popov, E.A., Theory of Metal Forming, Mashinostroenie, Moscow, 1977.
28. Yoon, J.W., Dick, R.E., and Barlat, F., A New Analytical Theory for Earing Generated from Anisotropic Plasticity, International Journal of Plasticity, 2011, vol. 27, no. 8, pp. 1165–1184. https://doi.org/10.1016/j.ijplas.2011.01.00210.1016/j.ijplas.2011.01.002 ↗
29. Chung, K., Kim, D., and Park, T., Analytical Derivation of Earing in Circular Cup Drawing Based on Simple Tension Properties, European Journal of Mechanics - A/Solids, 2010, vol. 30, no. 3, pp. 275–280. https://doi.org/10.1016/j.eurmechsol.2011.01.00610.1016/j.eurmechsol.2011.01.006 ↗
30. Yushin, R.Yu., On the Possibility of Taking into Account Plastic Anisotropy in Bending of Round Plates, Vestnik St. Petersburg University. Mathematics, 2010, no. 1, pp. 134–140.
31. Kostikov, I.E., Kuznetsov, E.E., and Matchenko, N.M., Experimental Study of Plastic Anisotropy of Sheet-Rolled Aluminum Alloy Marerials, Vestnik Gosudarstvennogo universiteta prosveshcheniya. Seriya: Fizika-Matematika, 2017, no. 2, pp. 64–71. https://doi.org/10.18384/2310-7251-2017-2-64-7110.18384/2310-7251-2017-2-64-71 ↗
32. Yamshchikov, N.V. and Prasolov, P.F., Method for Determining Plastic Anisotropy of Metals, Patent SU 1495676, Bull. Invent, 1989, no. 27.
33. Aryshenskii, Yu.M., Theory of Sheet Stamping of Anisotropic Materials, Publ. House of Saratov University, Saratov, 1973.
34. Adamescu, R.A., Geld, P.V., and Mityushov, E.A., Anisotropy of Physical Properties of Metals, Metallurgia, Moscow, 1985.
35. Lekhnitsky, S.G., Theory of Elasticity of an Anisotropic Body, Moscow: Nauka, 1977.
36. Chung, K., Lee, S.Y., Barlat, F., Keum, Y.T., and Park, J.M., Finite Element Simulation of Sheet Forming Based on a Planar Anisotropic Strain-Rate Potential, International Journal of Plasticity, 1996, vol. 12, no. 1, pp. 93–115. https://doi.org/10.1016/S0749-6419(95)00046-110.1016/S0749-6419(95)00046-1 ↗
37. Barlat, F., Panchanadeeswaran, S., and Richmond, O., Earing in Cup Drawing Face-Centered Cubic Single Crystals and Polycrystals, Metallurgical Transactions A, 1991, vol. 22, pp. 1525–1534. https://doi.org/10.1007/BF0266736610.1007/BF02667366 ↗
38. Yoon, J.W., Dick, R.E., and Barlat, F., A New Analytical Theory for Earing Generated from Anisotropic Plasticity, International Journal of Plasticity, 2011, vol. 27, no. 8, pp. 1165–1184. https://doi.org/10.1016/j.ijplas.2011.01.00210.1016/j.ijplas.2011.01.002 ↗
39. Aryshenskii, V.Yu., Development of a Mechanism of Formation of a Given Anisotropy of Properties during Rolling of Aluminum Strips for Deep Drawing with Ironing, Doctoral (Eng.) Dissertation, Samara: Samara University, 2002.
40. Yashin, V.V., Aryshenskii, E.V., Konovalov, S.V., Aryshenskii, V.Yu., and Latushkin, I.A., A Study of Texture Component Distribution Over the Cross Section of An Aluminum Alloy 8011 Billet with Hot Rolling in A Four-Stand Continuous Group, Metal Science and Heat Treatment, 2019, vol. 61, pp. 300–304. https://doi.org/10.1007/s11041-019-00420-310.1007/s11041-019-00420-3 ↗
41. Hirsch, J., Texture Evolution and Earing in Aluminium Can Sheet, Materials Science Forum, 2005, vol. 495-497, pp. 1565–1572. https://doi.org/10.4028/www.scientific.net/MSF.495-497.156510.4028/www.scientific.net/MSF.495-497.1565 ↗
42. Engler, O., Löchte, L., and Hirsch, J., Through-Process Simulation of Texture and Properties During the Thermomechanical Processing of Aluminium Sheets, Acta Materialia, 2007, vol. 55, no. 16, pp. 5449–5463. https://doi.org/10.1016/j.actamat.2007.06.01010.1016/j.actamat.2007.06.010 ↗
43. Engler, O. and Vatne, H.E., Modeling the Recrystallization Textures of Aluminum Alloys After Hot Deformation, JOM, 1998, vol. 50, pp. 23–27. https://doi.org/10.1007/s11837-998-0123-y10.1007/s11837-998-0123-y ↗
44. Hjelen, J., Ørsund, R., and Nes, E., On the Origin of Recrystallization Textures in Aluminium, Acta Metallurgica et Materialia, 1991, vol. 39, no. 7, pp. 1377–1404. https://doi.org/10.1016/0956-7151(91)90225-P10.1016/0956-7151(91)90225-P ↗
45. Zhao, Q., Liu, Zh., Hu, Ya., Li, Sh., and Bai, S., Evolution of Goss Texture in An Al–Cu–Mg Alloy During Cold Rolling, Archives of Civil and Mechanical Engineering, 2020, vol. 20, pp. 1–15. https://doi.org/10.1007/s43452-020-00023-310.1007/s43452-020-00023-3 ↗
46. Bunge, H.J., Texture Analysis in Materials Science. Mathematical Methods, Elsevier, 1969.
47. Landolt, H., Baldini, A., Flaminio, V., Moorhead, W.G., and Morrison, D.R.O., Numerical data and functional relationships in science and technology, Springer, 1987.
48. Choi, S.H., Cho, J.H., Barlat, F., Chung, K., Kwon, J.W., and Oh, K.H., Mechanical Behavior-Prediction of Yield Surfaces of Textured Sheet Metals, Metallurgical and Materials Transactions A, 1999, vol. 30, no. 2, pp. 377–386. https://doi.org/10.1007/s11661-999-0327-y10.1007/s11661-999-0327-y ↗
49. Erisov, Y., Grechnikov, F., Surudin, S., and Razhivin, V., A Simplified Yield Criterion of the Orthotropic Material Considering the Crystallographic Texture, IOP Conference Series: Materials Science and Engineering, 2020, vol. 986, no. 1, p. 012031. https://doi.org/10.1088/1757-899X/986/1/01203110.1088/1757-899X/986/1/012031 ↗
50. Richards, T.L. and Pugh, S.F., Structural Changes in 99.990% Pure Aluminium During Rolling and Annealing, Journal of the Japan Institute of Metals and Materials, 1960, vol. 88, pp. 399–405.
51. Lücke, K., Rolling and Recrystallization Texture of Aluminum. Texture of Cold-Rolled Aluminum, Zeitschrift Fur Metallkunde, 1954, vol. 45, pp. 86–92.