Formation mechanism and improved properties of Cu95Fe5 homogeneous immiscible composite coating by the combination of mechanical alloying and laser cladding
Source abstract
Abstract
Abstract In order to improve the homogeneity of spherical Fe-rich particles within the Cu-rich matrix, the Cu95Fe5 (wt%) immiscible composite coating has been produced by the combination of mechanical alloying and laser cladding. The results show that the milled composite powder presents a polygonal morphology and is mainly composed of face-centered-cubic (fcc)-Cu solid solution. The demixing or delimitation is eliminated in the immiscible composite coating produced by laser cladding and large amounts of spherical α-Fe particles are dispersed within the e-Cu matrix as a result of liquid phase separation (LPS). The size of the Fe-rich particles measured is in radius of ∼1.5 μm, which is much smaller than the calculated critical radius (∼2.3 μm), confirming that the α-Fe particles containing a supersaturated Cu are driven by the dominant mechanism of Marangoni motion. Compared to Brass, the immiscible composite coating exhibits the improved homogeneous microhardness (153HV0.2) and higher corrosion resistance, as well as a saturated magnetization of ∼9.19 emu/g and low coercivity of ∼9.25 Oe.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Additive Manufacturing Materials and Processes · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Liquid immiscibility in copper-iron and copper-cobalt systems in the supercooled state10.1016/0001-6160(58)90061-0 ↗
2. Formation mechanisms of self-organized core/shell and core/shell/corona microstructures in liquid droplets of immiscible alloys10.1016/j.actamat.2012.10.033 ↗
3. Structural morphologies of Cu-Sn-Bi immiscible alloys with varied compositions10.1016/j.jallcom.2012.04.032 ↗
4. Effect f supercooling and cooling rate on the microstructure of Cu-Co-Fe alloys10.1007/s10853-006-5598-8 ↗
5. Fe-shell/Cu-core encapsulated metallic phase change materials prepared by aerodynamic levitation method10.1016/j.apenergy.2014.07.054 ↗
6. Liquid separation in Cu–Co and Cu–Co–Fe alloys solidified at high cooling rates10.1023/A:1004663530929 ↗
7. High-efficiency control of phase separation in Al-based immiscible alloys10.1016/j.jallcom.2015.03.194 ↗
8. Atomic arrangement in immiscible Ag-Cu alloys synthesized far-from-equilibrium10.1016/j.actamat.2016.03.023 ↗
9. Phase separation and microstructure evolution of ternary Fe-Sn-Ge immiscible alloy under microgravity condition10.1016/j.commatsci.2015.03.013 ↗
10. Design and microstructure analysis of globules in Al-Co-La-Pb immiscible alloys with an amorphous phase10.1016/j.matdes.2016.12.092 ↗
11. Phase separation and rapid solidification of liquid Cu60Fe30Co10 ternary peritectic alloy10.1007/s11433-007-0047-5 ↗
12. Carbon nanotube-and Fep-reinforced copper–matrix composites by laser induction hybrid rapid cladding10.1016/j.scriptamat.2013.12.006 ↗
13. Synthesis of Fep/Cu-Cup/Fe duplex composite coatings by laser cladding10.1016/j.matdes.2016.02.125 ↗
14. Investigation of Cu–Fe-based coating produced on copper alloy substrate by laser induction hybrid rapid cladding10.1016/j.optlastec.2013.12.013 ↗
15. Effect of substrate types on the microstructure and properties of Cu65Fe35 composite coatings by laser induction hybrid cladding10.1016/j.jallcom.2017.06.064 ↗
16. Grain boundary segregation in immiscible nanocrystalline alloys10.1016/j.actamat.2016.12.036 ↗
17. Combustion synthesis immiscible nanostructured Fe–Cu alloy10.1016/j.jallcom.2009.04.016 ↗
18. Metastable bcc and fcc alloy bulk bodies in Fe–Cu system prepared by mechanical alloying and shock compression10.1016/S0925-8388(99)00108-5 ↗
19. The formation of supersaturated solid solutions in Fe-Cu alloys deformed by high-pressure torsion10.1016/j.actamat.2011.10.044 ↗
20. Microstructure and solidification process of Fe-Cu immiscible alloy by using containless process10.2320/jinstmet.JBW201608 ↗
21. Solidification pathways of ternary Cu62.5Fe27.5Sn10 alloy modulated through liquid undercooling and containless processing10.1007/s00339-016-0505-x ↗
22. Formation of immiscible alloy powders with egg-type microstructure10.1126/science.1073050 ↗
23. Amorphization in mechanically alloyed (Ti, Zr, Nb)-(Cu, Ni)-Al equiatomic alloys10.1016/j.jallcom.2006.03.092 ↗
24. Mechanically alloyed amorphous Ti50(Cu0.45Ni0.55)44-xAlxSi4B2 alloys with supercooled liquid region10.1557/JMR.2002.0258 ↗
25. Mechanically milling-induced amorphization in Sn-containing Ti-based multicomponent alloy systems10.1016/j.msea.2004.11.051 ↗
26. Dehydrogenation characteristics of Ti- and Ni/Ti-catalyzed Mg hydrides10.1016/j.jallcom.2009.02.125 ↗
27. Near room temperature magnetocaloric properties and critical behavior of binary FexCu100-x nanoparticles10.1016/j.jallcom.2016.08.170 ↗
28. Microstructure and phase selection in supercooled copper alloys exhibiting metastable liquid miscibility gaps10.1007/s10853-012-6354-x ↗
29. Influence of Al addition on microstructure and properties of Cu-Fe-based coatings by laser induction hybrid rapid cladding10.1557/jmr.2014.64 ↗
30. Microstructure evolution of phase separation Fe-Cu-Cr-C composite coatings by laser induction hybrid cladding10.1016/j.surfcoat.2017.06.032 ↗
31. Solidification of the Cu-35 wt pct Fe alloys with liquid separation10.1007/s11661-013-1905-6 ↗
32. Solid-state reactions during high-energy milling of mixed powder10.1016/j.actamat.2012.09.061 ↗
33. Investigation on the formation of Cu-Fe nano crystalline super-saturated solid solution developed by mechanical alloying10.1016/j.jallcom.2012.10.112 ↗
34. Electrochemical impedance spectroscopy (EIS) as a new tool for investigating methods of corrosion protection10.1016/0013-4686(90)80007-B ↗
35. Novel microstructure and properties of multicomponent CoCrCuFeNiTix alloys10.1016/j.intermet.2006.08.005 ↗
36. Solidification microstructure and dynamics of metastable phase transformation in undercooled liquid Cu–Fe alloys10.1016/j.actamat.2005.12.023 ↗
37. Movement of minor phase in undercooled immiscible Fe–Co–Cu alloys10.1016/j.jallcom.2012.10.050 ↗
38. Phase separation in monotectic alloys as a route for liquid state fabrication of composite materials10.1007/s10853-012-6660-3 ↗
39. A new coarsening mechanism of droplet spinodal decomposition10.1063/1.469658 ↗
40. Coarsening mechanisms of droplet spinodal decomposition in binary fluid mixtures10.1063/1.472839 ↗
41. In situ synthesis and characterization of Fep/Cu composite coating on SAE 1045 carbon steel by laser cladding10.1016/S0921-5093(02)00451-3 ↗
42. Enhanced corrosion and wear resistance properties of carbon fiber reinforced Ni-based composite coating by laser cladding10.1016/j.surfcoat.2017.11.051 ↗
43. Sacrificial anode cathodic protection of aluminum-coated steel for automotive muffles10.5006/1.3278403 ↗