Defects/CMAS corrosion resistance relationship in plasma sprayed YPSZ coating
Source abstract
Abstract
Abstract This study aims to elaborate the effect of microstructural defects in plasma sprayed yttria partially stabilized zirconia (YPSZ) coating on its corrosion resistance to CaO-MgO-Al 2 O 3 -SiO 2 (CMAS). The microstructural evolution of YPSZ coating under corrosion condition was comparatively studied. The results suggested that the defects that existed in the as-sprayed coating significantly decreased its corrosion resistance to CMAS. The penetration of CMAS could be effectively suppressed through depositing low-defected YPSZ coating by controlling the velocity and temperature of in-flight particles before they impacted onto the substrate. The dissolution of Y 2 O 3 into CMAS caused the phase transformation from the metastable tetragonal phase (t′-ZrO 2 ) to the monoclinic phase (m-ZrO 2 ) and some components in CMAS can act as sintering additives to accelerate the densification of coatings. The stress caused by the thermal gradient and sintering resulted in the initiation and propagation of coarse cracks, which were basically vertical to the coating surface. These vertical cracks can greatly promote the penetration of CMAS, and vice versa.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Thermal barrier coatings for gas-turbine engine applications10.1126/science.1068609 ↗
2. Mechanisms controlling the durability of thermal barrier coatings10.1016/S0079-6425(00)00020-7 ↗
3. Thermal cycling behavior of plasma sprayed lanthanum zirconate based coatings under concurrent infiltration by a molten glass concoction10.1016/j.ceramint.2012.07.084 ↗
4. Thermochemical interaction of thermal barrier coatings with molten CaO-MgO-Al2O3-SiO2 (CMAS) deposits10.1111/j.1551-2916.2006.01209.x ↗
5. Deposition of volcanic materials in the hot sections of two gas turbine engines10.1115/1.2906754 ↗
6. Erosion and deposition in turbomachinery10.2514/1.18462 ↗
7. Microstructure and thermo-physical properties of yttria stabilized zirconia coatings with CMAS deposits10.1016/j.jeurceramsoc.2011.04.006 ↗
8. Microstructural characterization of the interaction between 8YPSZ(EB-PVD) thermal barrier coatings and synthetic CAS10.1016/j.surfcoat.2013.11.014 ↗
9. Plasma-sprayed La2Ce2O7 thermal barrier coatings against calcium-magnesium-alumina-silicate penetration10.1016/j.jeurceramsoc.2014.02.031 ↗
10. Degradation of EB-PVD thermal barrier coatings caused by CMAS deposits10.1016/j.pnsc.2012.06.007 ↗
11. 2ZrO2·Y2O3 thermal barrier coatings resistant to degradation by molten CMAS: partⅠ, optical basicity considerations and processing10.1111/jace.13210 ↗
12. A delamination mechanism for thermal barrier coatings subject to calcium- magnesium-alumino-silicate (CMAS) infiltration10.1016/j.actamat.2004.11.028 ↗
13. Mechanisms of cracking and delamination within thick thermal barrier systems in aero-engines subject to calcium-magnesium-alumino-silicate (CMAS) penetration10.1016/j.msea.2008.01.006 ↗
14. Environmental degradation of thermal barrier coatings by molten deposits10.1557/mrs.2012.230 ↗
15. Calcia-magnesia-alumino-silicate (CMAS)-induced degradation and failure of air plasma sprayed yttria-stabilized zirconia thermal barrier coatings10.1016/j.actamat.2015.12.044 ↗
16. CMAS-resistant thermal barrier coatings10.1111/j.1744-7402.2009.02373.x ↗
17. Electrophoretically deposited alumina as protective overlay for thermal barrier coatings against CMAS degradation10.1016/j.surfcoat.2009.09.055 ↗
18. Plasma-Sprayed thermal barrier coatings with enhanced splat bonding for CMAS and corrosion protection10.1007/s11666-015-0345-9 ↗
19. Deposition and properties of a multilayered thermal barrier coating10.1016/j.surfcoat.2016.01.001 ↗
20. Structure and properties differences between supersonic and conventional atmospheric plasma sprayed zirconia thermal barrier coatings10.1016/j.surfcoat.2011.01.056 ↗
21. Fine-lamellar structured thermal barrier coatings fabricated by high efficiency supersonic atmospheric plasma spraying10.1016/j.vacuum.2013.05.013 ↗
22. Effect of particle in-flight behavior on the composition of thermal barrier coatings10.1016/j.apsusc.2013.09.045 ↗
23. The effect of sintering additives on the hydrothermal and corrosive degradation of Y-TZP10.4028/www.scientific.net/KEM.113.199 ↗
24. Influence of sintering aids on sintering and mechanical properties of 3Y-TZP/Al2O3 (40 vol %) composite10.1023/A:1019975002162 ↗
25. Microstructural analysis of sintered high- conductivity zirconia with Al2O3 additions10.1111/j.1151-2916.1982.tb10336.x ↗
26. Enhancement of the ionic conductivity of mixed calcia/yttria stabilized zirconia10.1016/S0167-577X(00)00152-X ↗
27. A sintering model for plasma-sprayed zirconia TBCs, Part I: free-standing coatings10.1016/j.actamat.2008.10.024 ↗
28. A sintering model for plasma-sprayed zirconia thermal barrier coatings, Part II: coatings bonded to a rigid substrate10.1016/j.actamat.2008.10.058 ↗
29. Novel thermal barrier coatings that are resistant to high-temperature attack by glassy deposits10.1016/j.actamat.2007.08.028 ↗
30. The mechanics of coating delamination in thermal gradients10.1016/j.surfcoat.2007.03.029 ↗
31. An improved Vickers indentation fracture toughness model to assess the quality of thermally sprayed coatings10.1016/j.engfracmech.2014.07.015 ↗
32. Thermal shock resistance and mechanical properties of La2Ce2O7 thermal barrier coatings with segmented structure10.1016/j.ceramint.2009.02.025 ↗
33. Elastic/plastic indentation damage in ceramics: the median/radial crack system10.1111/j.1151-2916.1980.tb10768.x ↗
34. Melting index characterization and thermal conductivity model of plasma sprayed YSZ coatings10.1016/j.jeurceramsoc.2012.05.030 ↗
35. Residual stresses and constrained sintering of YSZ/Al2O3 composite coatings10.1016/j.actamat.2004.02.007 ↗
36. Surface and grain-boundary energies in yttria-stabilized zirconia(YSZ-8 mol %)10.1007/BF01159310 ↗
37. A transmission electron microscopy study of the microstructure and interface of zirconia-based thermal barrier coatings10.1016/j.jallcom.2014.09.058 ↗
38. On the delamination of thermal barrier coatings in a thermal gradient10.1016/S0257-8972(01)01451-7 ↗