Experimental and Numerical Investigation of Mesoscale Deformation-Induced Surface Roughening in Polycrystalline Metals and Alloys (Review)

1. Alekhin, V.P., Physics of Strength and Plasticity of Surface Layers of Materials, Moscow: Nauka, 1983.

2. Davidenkov, N.N., X-Ray Studies of Plastic Deformation, Zhur. Tekh. Fiz., 1944, vol. 14, no. 9, pp. 507–514.

3. Kolb, K. and Macherauch, E., The Flow Stress of Surface Layers of Polycrystalline Nickel and Its Influence on the Residual Stresses in Deformed Specimens, Philos. Mag., 1962, vol. 7, no. 75, pp. 415–426. https://doi.org/10.1080/1478643620821217410.1080/14786436208212174 ↗

4. Gillman, J.J. and Johnston, W.G., Dislocation Nucleation in LiF Crystals at Low Stresses, in Dislocations and Mechanical Properties of Crystals, New York: J. Wiley, 1957.

5. Orlov, L.G., Dislocation Nucleation on External and Internal Surfaces of Crystals, Fiz. Tv. Tela, 1967, vol. 9, no. 8, pp. 2345–2349.

6. Surface Layers and Internal Interfaces in Heterogeneous Materials, Panin, V.E., Ed., Novosibirsk: Izd-vo SO RAN, 2006

7. Nix, W.D., Micro-Pillar Plasticity Controlled by Dislocation Nucleation at Surfaces, Philos. Mag., 2011, vol. 91, no. 7-9, pp. 1084–1096. https://doi.org/10.1080/14786435.2010.50214110.1080/14786435.2010.502141 ↗

8. Panin, V.E. and Panin, A.V., Effect of the Surface Layer in a Solid under Deformation, Phys. Mesomech., 2005, vol. 8, no. 5–6, pp. 7–14.

9. Egorushkin, V.E., Panin, V.E. and Panin, A.V., Influence of Multiscale Localized Plastic Flow on Stress-Strain Patterns, Phys. Mesomech., 2015, vol. 18, no. 1, pp. 8–12.10.1134/S1029959915010026 ↗

10. Panin, A.V., Plastic Deformation and Fracture of Commercial Titanium and Low-Carbon Steel Subjected to Ultrasonic Treatment, Fiz. Met. Metalloved., 2004, vol. 98, no. 1, pp. 109–118.

11. Panin, V.E., Grinyaev, Yu.V., Elsukova, T.F., and Ivanchin, A.G., Structural Levels of Deformation of Solids, Sov. Phys. J., 1982, vol. 25, pp. 479–497.10.1007/BF00898745 ↗

12. Beaudoin, A.J., Bryant, J.D., and Korzekwa, D.A., Analysis of Ridging in Aluminum Auto Body Sheet Metal, Metall. Mater. Trans. A, 1998, vol. 29, no. 9, pp. 2323–2332. https://doi.org/10.1007/s11661-998-0109-y10.1007/s11661-998-0109-y ↗

13. Becker, R., Effects of Strain Localization on Surface Roughening during Sheet Forming, Acta Mater., 1998, vol. 46, no. 4, pp. 1385–1401. https://doi.org/10.1016/S1359-6454(97)00182-110.1016/S1359-6454(97)00182-1 ↗

14. Chao, H.C., Recent Studies into the Mechanism of Ridging in Ferritic Stainless Steels, Metall. Trans., 1973, vol. 4, no. 4, pp. 1183–1186. https://doi.org/10.1007/BF0264563010.1007/BF02645630 ↗

15. Raabe, D., Sachtleber, M., Weiland, H., Scheele, G., and Zhao, Z., Grain-Scale Micromechanics of Polycrystal Surfaces during Plastic Straining, Acta Mater., 2003, vol. 51, pp. 1539–1560. https://doi.org/10.1016/S1359-6454(02)00557-810.1016/S1359-6454(02)00557-8 ↗

16. Lee, P.S., Piehler, H.R., Adams, B.L., Jarvis, G., Hampel, H., and Rollett, A.D., Influence of Surface Texture on Orange Peel in Aluminum, J. Mater. Process. Technol., 1998, vol. 80–81, pp. 315–319. https://doi.org/10.1016/S0924-0136(98)00189-710.1016/S0924-0136(98)00189-7 ↗

17. Guilhem, Y., Basseville, S., Curtit, F., Stephan, J.-M., and Cailletaud, G., Numerical Investigations of the Free Surface Effect in Three-Dimensional Polycrystalline Aggregates, Comput. Mater. Sci., 2013, vol. 70, pp. 150–162. https://doi.org/10.1016/j.commatsci.2012.11.05210.1016/j.commatsci.2012.11.052 ↗

18. Stoudt, M.R. and Hubbard, J.B., Analysis of Deformation-Induced Surface Morphologies in Steel Sheet, Acta Mater., 2005, vol. 53, pp. 4293–4304. https://doi.org/10.1016/j.actamat.2005.05.03810.1016/j.actamat.2005.05.038 ↗

19. Stoudt, M.R. and Ricker, R.E., The Relationship between Grain Size and the Surface Roughening Behavior of Al-Mg Alloys, Metall. Mater. Trans. A, 2002, vol. 33, no. 9, pp. 2883–2889. https://doi.org/10.1007/s11661-002-0273-410.1007/s11661-002-0273-4 ↗

20. Stoudt, M.R., Levine, L.E., Creuziger, A., and Hubbard, J.B., The Fundamental Relationships between Grain Orientation, Deformation-Induced Surface Roughness and Strain Localization in an Aluminum Alloy, Mater. Sci. Eng. A, 2011, vol. 530, pp. 107–116. https://doi.org/10.1016/j.msea.2011.09.05010.1016/j.msea.2011.09.050 ↗

21. Thomson, P.F. and Nayak, P.U., The Effect of Plastic Deformation on the Roughening of Free Surfaces of Sheet Metal, Int. J. Mach. Tools Manuf., 1980, vol. 20, no. 1, pp. 73–86. https://doi.org/10.1016/0020-7357(80)90020-710.1016/0020-7357(80)90020-7 ↗

22. Popov, V.L., Coefficients of Restitution in Normal Adhesive Impact between Smooth and Rough Elastic Bodies, Rep. Mech. Eng., 2020, vol. 1, pp. 103–109. https://doi.org/10.31181/rme200101103p10.31181/rme200101103p ↗

23. Daghbouj, N., Sen, H.S., Callisti, M., Vronka, M., Karlik, M., Duchoň, J., Čech, J., Havránek, V., and Polcar, T., Revealing Nanoscale Strain Mechanisms in Ion-Irradiated Multilayers, Acta Mater., 2022, vol. 229, p. 117807. https://doi.org/10.1016/j.actamat.2022.11780710.1016/j.actamat.2022.117807 ↗

24. Starzynski, G., Buczkowski, R., and Zylinski, B., Deformation-Induced Roughening by Contact Compression in the Presence of Oils with Different Viscosity: Experiment and Numerical Simulation, Tribol. Let., 2020, vol. 68, no. 4, p. 117. https://doi.org/10.1007/s11249-020-01353-210.1007/s11249-020-01353-2 ↗

25. Engler, O., Schäfer, C., and Brinkman, H.-J., Crystal-Plasticity Simulation of the Correlation of Microtexture and Roping in AA 6xxx Al–Mg–Si Sheet Alloys for Automotive Applications, Acta Mater., 2012, vol. 60, no. 13–14, pp. 5217–5323. https://doi.org/10.1016/j.actamat.2012.06.03910.1016/j.actamat.2012.06.039 ↗

26. Sneddon, S., Xu, Y., Dixon, M., Rugg, D., Li, P., and Mulvihill, D.M., Sensitivity of Material Failure to Surface Roughness: A Study on Titanium Alloys Ti64 and Ti407, Mater. Des., 2021, vol. 200, pp. 109438-1–14. https://doi.org/10.1016/j.matdes.2020.10943810.1016/j.matdes.2020.109438 ↗

27. Belov, V.K., Gubarev, E.V., Krivko, O.V., and Begletsov, D.O., Study of Microtopography of Free Surface of IF-Steel at the Uniaxial Stretching, Ferrous Metall. Bullet. Sci. Tech. Econom. Inform., 2021, vol. 77, no. 12, pp. 1268–1278. https://doi.org/10.32339/0135-5910-2021-12-1268-127810.32339/0135-5910-2021-12-1268-1278 ↗

28. Love, J.C., Smith, G.F., Pharaoh, M., and Coates, R., Orange Peel: Who cares?, Proc. Inst. Mech. Eng. D: J. Automob. Eng., 2001, vol. 215, no. 12, pp. 1241–1244. https://doi.org/10.1243/095440701152877010.1243/0954407011528770 ↗

29. Boér, J. and Blaga, P., Reducing Production Costs by Monitoring the Roughness of Raw Product Surfaces, Proc. Manuf., 2018, vol. 22, pp. 202–208. https://doi.org/10.1016/j.promfg.2018.03.03110.1016/j.promfg.2018.03.031 ↗

30. Adam, K.F. and Field, D.P., Developing Novel Heterogenous Microstructures to Balance between Strength and Ductility without Restoration Processes in Commercial Al Alloys, Mech. Adv. Mater. Struct., 2022, vol. 29, no. 16, pp. 2371–2379. https://doi.org/10.1080/15376494.2020.186294110.1080/15376494.2020.1862941 ↗

31. Lychagin, D.V., Starenchenko, V.A., and Solov’eva, Yu.V., Classification and Scale Hierarchy of Structure Elements in Compression-Strained FCC Single Crystals, Phys. Mesomech., 2006, vol. 9, no. 1–2, p. 63–72.

32. Alfyorova, E.A. and Lychagin, D.V., Self-Organization of Plastic Deformation and Deformation Relief in FCC Single Crystals, Mech. Mater., 2018, vol. 117, pp. 202–213. https://doi.org/10.1016/j.mechmat.2017.11.01110.1016/j.mechmat.2017.11.011 ↗

33. Yang, Y., Wang, L., Zambaldi, C., Eisenlohr, P., Barabash, R., Liu, W., Stoudt, M.R., Crimp, M.A., and Bieler, T.R., Characterization and Modeling of Heterogeneous Deformation in Commercial Purity Titanium, JOM, 2011, vol. 63, pp. 66–72. https://doi.org/10.1007/s11837-011-0161-810.1007/s11837-011-0161-8 ↗

34. Miranda-Medina, M.L., Somkuti, P., Bianchi, D., Cihak-Bayr, U., Bader, D., Jech, M., and Vernes, A., Characterisation of Orange Peel on Highly Polished Steel Surfaces, Surf. Eng., 2015, vol. 31, pp. 519–525. https://doi.org/10.1179/1743294414Y.000000040710.1179/1743294414Y.0000000407 ↗

35. Zhang, H., Liu, J., and Sui, D., Study of Microstructural Grain and Geometric Size Effects on Plastic Heterogeneities at Grain-Level by Using Crystal Plasticity Modeling with High-Fidelity Representative Microstructures, Int. J. Plast., 2018, vol. 100, pp. 69–89. https://doi.org/10.1016/j.ijplas.2017.09.01110.1016/j.ijplas.2017.09.011 ↗

36. Panin, V.E., Balokhonov, R.R., Derevyagina, L.S., and Romanova, V.A., The Effect of Plastic Flow in the Neck on the Scale Levels of Fracture in Polycrystals. Experiment and Modeling, Phys. Mesomech., 2011, vol. 14, no. 1–2, pp. 16–23.10.1016/j.physme.2011.04.003 ↗

37. Ma, X., Zhao, J., Du, W., Zhang, X., Jiang, L., and Jiang, Zh., Quantification of Texture-Induced Ridging in Ferritic Stainless Steels 430 and 430LR during Tensile Deformation, J. Mater. Res. Technol., 2019, vol. 8, pp. 2041–2051. https://doi.org/10.1016/j.jmrt.2018.12.01910.1016/j.jmrt.2018.12.019 ↗

38. Qin, L., Van Houtte, P., and Seefeldt, M., Meso-Scale Modelling on Ridging or Roping of Aluminium Alloys, Mater. Sci. Technol., 2013, vol. 2, pp. 1274–1283.

39. Panin, A.V., Klimenov, V.A., Abramovskaya, N.L. and Son, A.A., Initiation and Development of Defect Flows at the Solid Surface under Loading, Phys. Mesomech., 2000, vol. 3, no. 1, pp. 83–91.

40. Panin, V.E., Panin, A.V., and Moiseenko, D.D., Physical Mesomechanics of a Deformed Solid as a Multilevel System. II. Chessboard-Like Mesoeffect of the Interface in Heterogeneous Media in External Fields, Phys. Mesomech., 2007, vol. 10, no. 1–2, pp. 5–14.10.1016/j.physme.2007.06.001 ↗

41. Romanova, V., Balokhonov, R., Emelianova, E., Sinyakova, E., and Kazachenok, M., Early Prediction of Macroscale Plastic Strain Localization in Titanium from Observation of Mesoscale Surface Roughening, Int. J. Mech. Sci., 2019, vol. 161–162, p. 105047. https://doi.org/10.1016/j.ijmecsci.2019.10504710.1016/j.ijmecsci.2019.105047 ↗

42. Panin, A.V., Romanova, V.A., Balokhonov, R.R., Perevalova, O.B., Sinyakova, E.A., Emelyanova, O.S., Leontieva-Smirnova, M.V., and Karpenko, N.I., Mesoscopic Surface Folding in EK-181 Steel Polycrystals under Uniaxial Tension, Phys. Mesomech., 2012, vol. 15, no. 1–2, pp. 94–103.10.1134/S1029959912010109 ↗

43. Zasimchuk, E.E. and Yarmatov, I.T., In Situ Observation of the Surface Relief Formation in the Single-Crystalline Aluminum Foil during Constrained Tension, Fiz. Mezomekh., 2009, vol. 12, no. 3, pp. 55–60.

44. Kuznetsov, P.V., Petrakova, I.V., Gordienko, Yu.G., Zasimchuk, E.E., and Karbovskii, V.L., Formation of Self-Similar Structures on {100}<001> Aluminum Single-Crystal Foils under Cyclic Tension, Phys. Mesomech., 2009, vol. 12, no. 1–2, p. 85–93.10.1016/j.physme.2009.03.011 ↗

45. Lychagin, D.V., Fragmentation of Plastically Deformed FCC Metallic Materials, Phys. Mesomech., 2006, vol. 9, no. 3–4, pp. 95–105.

46. Starenchenko, V.A., Chernykh, L.G., and Ivanova, N.Yu., Deformation-Induced Roughness of Deeply Deformed Ni and Cu Single Crystals, Izv. Vyssh. Ucheb. Zaved. Fiz., 1989, vol. 32, no. 8, pp. 116–118.

47. Teplyakova, L.A., Bespalova, I.V., and Lychagin, D.V., Spatial Organization of Deformation in Aluminum Single Crystals in Compression, Phys. Mesomech., 2009, vol. 12, no. 3–4, p. 166.10.1016/j.physme.2009.07.009 ↗

48. Lychagin, D.V., Teplyakova, L.A., Shaekhov, R.V., Koneva, N.A., and Kozlov, E.V., Evolution of the Deformation Relief in Al Single Crystals with a Compression Axis Orientation [001], Phys. Mesomech., 2003, vol. 6, no. 1–2, pp. 101–108.

49. Alferova, E.A., Influence of Crystallographic Orientation of Nickel Single Crystals on Deformation-Induced Roughness and Deformation Inhomogeneity under Compression, Cand. Sci. (Phys.-Math.) Dissertation, Tomsk: TGU, 2012.

50. Chumaevsky, A.V., Plastic Deformation in Copper Single Crystals under Uniaxial Compression and Friction, Cand. Sci. (Engng) Dissertation, Tomsk: IFPM SO RAN, 2014.

51. Batukhtina, E.E., Micromechanical Model of Deformation Behavior of Polycrystalline Aluminum Based on Crystal Plasticity Theory, Cand. Sci. (Phys.-Math.) Dissertation, Tomsk: TGU, 2019.

52. Zinovieva, O.S., Mechanical Aspects of Mesoscale Deformation-Induced Surface Roughening in Loaded Polycrystals, Cand. Sci. (Phys.-Math.) Dissertation, Tomsk: TGU, 2015.

53. Honeycombe, R.W.K., The Plastic Deformation of Metals, London–Baltimore: E. Arnold, 1984.

54. Berner, R. und Kronmüller, H., Plastische Verformung von Einkristallen, Berlin: Springer-Verlag, 1965.10.1007/978-3-662-36729-2_2 ↗

55. Harren, S.V., Deve, H.E., and Asaro, R.S., Shear Band Formation in Plane Strain Compression, Acta Metall., 1988, vol. 36, no. 9, pp. 2436–2480. https://doi.org/10.1016/0001-6160(88)90193-910.1016/0001-6160(88)90193-9 ↗

56. Zhao, Z., Radovitzky, R., and Cuitiño, A., A Study of Surface Roughening in FCC Metals Using Direct Numerical Simulation, Acta Mater., 2004, vol. 52, pp. 5791–5804. https://doi.org/10.1016/j.actamat.2004.08.03710.1016/j.actamat.2004.08.037 ↗

57. Wilson, D., Roberts, W., and Rodrigues, P., Effects of Grain Anisotropy on Limit Strains in Biaxial Stretching: Part I. Influence of Sheet Thickness and Grain Size in Weakly Textured Sheet, Metall. Trans. A, 1981, vol. 12, pp. 1603–1611. https://doi.org/10.1007/BF0264356510.1007/BF02643565 ↗

58. Ratnagar, D.D., Cheng, H.S., and Schey, J.A., The Surface Deformation of Aluminum Compressed with Viscous Lubricants, J. Tribol., 1974, vol. 96, no. 4, pp. 591–594. https://doi.org/10.1115/1.345250510.1115/1.3452505 ↗

59. Wilson, W.R.D and Lee, W., Mechanics of Surface Roughening in Metal Forming Processes, J. Manuf. Sci. Eng., 2001, vol. 123, pp. 279–283. https://doi.org/10.1115/1.136359610.1115/1.1363596 ↗

60. Lee, W., Surface Roughening in Metal Forming Processes: Ph.D. Thesis, Evanston: Northwestern University, 1996.

61. Dautzenberg, J.H. and Kals, J.A.G., Stress State and Surface Roughness, Adv. Technol. Plasticity, 1984, vol. 1, pp. 186–191.

62. Dautzenberg, J.H. and Kals, J.A.G., Surface Roughness Caused by Metal Forming, CIRP Annals-Manuf. Technol., 1985, vol. 34, no. 1, pp. 477–479. https://doi.org/10.1016/S0007-8506(07)61815-010.1016/S0007-8506(07)61815-0 ↗

63. Wright, R.N., Anisotropic Plastic Flow in Ferritic Stainless Steels and the “Roping” Phenomenon, Metall. Trans., 1972, vol. 3, no. 1, pp. 83–91. https://doi.org/10.1007/BF0268058810.1007/BF02680588 ↗

64. Davidkov, A., Jain, M.K., Petrov, R.H., Wilkinson, D.S., and Mishra, R.K., Strain Localization and Damage Development during Bending of Al–Mg Alloy Sheets, Mater. Sci. Eng. A, 2012, vol. 550, pp. 395–407. https://doi.org/10.1016/j.msea.2012.04.09310.1016/j.msea.2012.04.093 ↗

65. Yoshida, K., Effects of Grain-Scale Heterogeneity on Surface Roughness and Sheet Metal Necking, Int. J. Mech. Sci., 2014, vol. 83, pp. 48–56. https://doi.org/10.1016/j.ijmecsci.2014.03.01810.1016/j.ijmecsci.2014.03.018 ↗

66. Muhammad, W., Ali, U., Brahme, A.P., Kang, J., and Mishra, R.K., Experimental Analyses and Numerical Modeling of Texture Evolution and the Development of Surface Roughness during Bending of an Extruded Aluminum Alloy Using a Multiscale Modeling Framework, Int. J. Plast., 2017, vol. 117, pp. 93–121. https://doi.org/10.1016/j.ijplas.2017.09.01310.1016/j.ijplas.2017.09.013 ↗

67. Shi, Y., Wu, P.D., Lloyd, D.J., and Embury, D., Numerical Study of Surface Roughening in Blow-Formed Aluminum Bottle with Crystal Plasticity, Mater. Sci. Eng. A, 2015, vol. 638, pp. 97–105. https://doi.org/10.1016/j.msea.2015.04.06310.1016/j.msea.2015.04.063 ↗

68. Romanova, V., Balokhonov, R., Panin, A., Kazachenok, M., and Kozelskaya, A., Micro- and Mesomechanical Aspects of Deformation-Induced Surface Roughening in Polycrystalline Titanium, Mater. Sci. Eng. A, 2017, vol. 697, pp. 248–258. https://doi.org/10.1016/j.msea.2017.05.02910.1016/j.msea.2017.05.029 ↗

69. Gorodetskyi, O., Hütter, M., and Geers, M.G.D., Detecting Precursors of Localization by Strain-Field Analysis, Mech. Mater., 2017, vol. 110, pp. 84–97. https://doi.org/10.1016/j.mechmat.2017.05.00110.1016/j.mechmat.2017.05.001 ↗

70. Ottenklev, F., Adell, M., and Orlov, D., Non-Monotonic Evolution of Surface Roughness in a Stainless Steel during Cold Deformation, Mater. Sci. Eng. A, 2021, vol. 799, p. 140150. https://doi.org/10.1016/j.msea.2020.14015010.1016/j.msea.2020.140150 ↗

71. Fomin, V.M., Golyshev, A.A., Kosarev, V.F., Malikov, A.G., Orishich, A.M., and Filippov, A.A., Deposition of Cermet Coatings on the Basis of Ti, Ni, WC, and B4C by Cold Gas Dynamic Spraying with Subsequent Laser Irradiation, Phys. Mesomech., 2020, vol. 23, no. 4, pp. 291–300. https://doi.org/10.1134/S102995992004002510.1134/S1029959920040025 ↗

72. GOST 2789-73: Surface Roughness. Parameters and Characteristics, Moscow: Standartinform, 2018.

73. GOST R ISO 4287-2014: Geometrical Product Specifications (GPS). Surface Texture. Profile Method. Terms, Definitions and Surface Texture Parameters, Moscow: Standartinform, 2015.

74. Leveling and Form Removal, in Surface Metrology Guide-Digital Surf., 2020. https://guide.digitalsurf.com/en/guide-leveling-form-removal.html

75. Feder, J., Fractals, New York–London: Plenum Press, 1988.10.1007/978-1-4899-2124-6 ↗

76. Mandelbrot, B.B., Fractals: Form, Chance, and Dimension, San Francisco: Freeman, 1977.

77. Mandelbrot, B.B., Fractals and Chaos, New York: Springer, 2004. https://doi.org/10.1007/978-1-4757-4017-210.1007/978-1-4757-4017-2 ↗

78. Gao, K., Qi, Zh., Liu, Y., and Zhang, J., Calculation Model for Ventilation Friction Resistance Coefficient by Surrounding Rock Roughness Distribution Characteristics of Mine Tunnel, Sci. Rep., 2022, vol. 12, no. 1, p. 3193. https://doi.org/10.1038/s41598-022-07115-510.1038/s41598-022-07115-5 ↗

79. Den Outer, A., Kaashoek, J.F., and Hack, H.R.G.K., Difficulties with Using Continuous Fractal Theory for Discontinuity Surfaces, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 1995, vol. 32, no. 1, pp. 3–9. https://doi.org/10.1016/0148-9062(94)00025-X10.1016/0148-9062(94)00025-X ↗

80. Majumdar, A. and Bhushan, B., Fractal Model of Elastic-Plastic Contact between Rough Surfaces, J. Tribol., 1991, vol. 113, no. 1, pp. 1–11. https://doi.org/10.1115/1.292058810.1115/1.2920588 ↗

81. Romanova, V., Emelianova, E., Pisarev, M., Zinovieva, O., and Balokhonov, R., Quantification of Mesoscale Deformation-Induced Surface Roughness in α-Titanium, Metals, 2023, vol. 13, no. 2, pp. 440-1–440-18. https://doi.org/10.3390/met1302044010.3390/met13020440 ↗

82. Kuznetsov, P.V., Panin, V.E., Levin, K.V., Lipnitskii, A.G., Pavlenko, V.I., and Schreiber, J., Fractal Dimension and Effects of Correlation of the Mesostructure of the Surface of Plastically Deformed Iron Silicide Polycrystals and Austenitic Corrosion-Resistant Steel, Met. Sci. Heat Treat., 2001, vol. 43, pp. 89–94. https://doi.org/10.1023/A:101058491479710.1023/A:1010584914797 ↗

83. Shimizu, I. and Abe, T., Surface Roughening and Fractal Dimension during Plastic Deformation of Polycrystalline Iron, JSME Int. J. A. Mech. Mater. Eng., 1994, vol. 37, no. 4, pp. 403–411. https://doi.org/10.1299/KIKAIA.59.36710.1299/KIKAIA.59.367 ↗

84. Berry, M.V. and Lewis, Z.V., On the Weierstrass–Mandelbrot Fractal Function, Proc. R. Soc. Lond., 1980, vol. 370, pp. 459–484. https://doi.org/10.1098/rspa.1980.004410.1098/rspa.1980.0044 ↗

85. Hurst, H.E., Long-Term Storage Capacity of Reservoirs, Trans. Am. Soc. Civ. Eng., 1951, vol. 116, no. 1, pp. 770–799. https://doi.org/10.1061/TACEAT.000651810.1061/TACEAT.0006518 ↗

86. Mandelbrot, B.B. and Wallis, J.R., Robustness of the Rescaled Range R/S in the Measurement of Noncyclic Long Run Statistical Dependence, Water Resour. Res., 1969, vol. 5, no. 5, pp. 967–988. https://doi.org/10.1029/WR005i005p0096710.1029/WR005i005p00967 ↗

87. Sánchez Granero, M.A., Trinidad Segovia, J.E., and García Pérez, J., Some Comments on Hurst Exponent and the Long Memory Processes on Capital Markets, Phys. A. Stat. Mech., 2008, vol. 387, no. 2, pp. 5543–5551. https://doi.org/10.1016/j.physa.2008.05.05310.1016/j.physa.2008.05.053 ↗

88. Vstovsky, G.V., Kolmakov, A.G., and Bunin, I.Zh., Introduction to Multifractal Parameterization of Material Structures, Izhevsk: Regulyarn. Khaotich. Dinamika, 2001.

89. Modeling and Experimental Investigation of Heterogeneous Bodies, Mayer, G.V., Ed., Tomsk: TGU, 2005.

90. Ivanova, V.S., Balankin, A.S., Bunin, I.Zh., and Oksogoev, A.A., Synergetics and Fractals in Materials Science, Moscow: Nauka, 1994.

91. Sevost’yanova, I.N. and Kul’kov, S.N., Fractal Characteristics of the Deformation Surfaces of a Composite Material and Their Correlation with the Structure, Tech. Phys. Lett., 1999, vol. 25, pp. 56–57.10.1134/1.1262354 ↗

92. Sevost’yanova, I.N. and Kul’kov, S.N., Fractal Characteristics of the Surface of a Plastically Deformed Tungsten Carbide/Iron Manganese Steel Composite, Pis’ma v ZhTF, 2003, vol. 73, no. 2, pp. 81–86.

93. Yasnikov, I.S., Vinogradov, A., and Estrin, Yu., Dislocation Model for the Behavior of Fractal Dimension of the Microstructure of a Strained Solid, Phys. Solid State, 2013, vol. 55, pp. 346–352.10.1134/S1063783413020352 ↗

94. Demchenko, A.A., Damage Assessment of Structural Materials by Changes in the Deformation-Induced Steel Surface Roughness, Cand. Sci. (Eng.) Dissertation, Ufa: UGNTU, 2013.

95. Romanova, V.A., Zinovieva, O.S., Balokhonov, R.R., Zinoviev, A.V., and Batukhtina, E.E., Effect of a Modified Surface Layer on the Deformation Relief of Polycrystalline Steel Specimens. Numerical Modeling, Fiz. Mezomekh., 2013, vol. 16, no. 6, pp. 59–69. https://doi.org/10.24411/1683-805X-2013-0004510.24411/1683-805X-2013-00045 ↗

96. Romanova, V., Balokhonov, R., and Zinovieva, O., A Micromechanical Analysis of Deformation-Induced Surface Roughening in Surface-Modified Polycrystalline Materials, Meccanica, 2016, vol. 51, pp. 359–370. https://doi.org/10.1007/s11012-015-0294-x10.1007/s11012-015-0294-x ↗

97. Romanova, V.A., Zinovyeva, O.S., Balokhonov, R.R., and Kovalev, V.A., Mesoscopic Surface Roughening in Polycrystalline Steel under Uniaxial Tension: Experiment and Modeling, Deform. Razrush. Mater., 2012, no. 5, pp. 32–40.

98. Romanova, V., Balokhonov, R., Zinovieva, O., Shakhidzhanov, V., Dymnich, E., and Nekhorosheva, O., The Relationship between Mesoscale Deformation-Induced Surface Roughness, In-Plane Plastic Strain and Texture Sharpness in an Aluminum Alloy, Eng. Fail. Anal., 2022, vol. 137, p. 106377. https://doi.org/10.1016/j.engfailanal.2022.10637710.1016/j.engfailanal.2022.106377 ↗

99. Romanova, V.A., Balokhonov, R.R., Shakhidzhanov, V.S., Vlasov, I.V., Moskvichev, E.N., and Nekhorosheva, O., Evolution of Mesoscopic Deformation-Induced Surface Roughness and Local Strains in Tensile Polycrystalline Aluminum, Phys. Mesomech., 2021, vol. 24, no. 5, pp. 570–577. https://doi.org/10.1134/S102995992105008810.1134/S1029959921050088 ↗

100. Emelianova, E., Romanova, V., Zinovieva, O., Pisarev, M., and Balokhonov, R., A Microstructure-Based Mechanical Model of Deformation-Induced Surface Roughening in Polycrystalline α-Titanium at the Mesoscale, Mech. Adv. Mater. Struct., 2022, vol. 29, no. 28, pp. 7364–7347. https://doi.org/10.1080/15376494.2021.199591610.1080/15376494.2021.1995916 ↗