Phase Formation in Reactive Sintering with Reduction
Source abstract
Abstract
Abstract Among the increasingly popular materials are composites combining the properties of metals and ceramic, and also the properties that result from the interaction of their dissimilar components. This paper provides a brief review of methods used to prepare components for synthesizing oxide-doped composites. The review is supplemented with experimental data on the sintering of Ti-based powder mixtures and with an analysis of physicochemical stages that may accompany the sintering of Ti–Al–Fe2O3 and Ti–Fe–Al2O3 powders of the same elemental composition under controlled heating. It is found that the sequence of phase formation stages depends on the factors of interparticle contacts. The sintering of powder mixtures composed of two metals and an oxide phase creates conditions for the formation of complex solutions (TiFeAl for Ti–Al–Fe2O3) and double oxides (FeAl2O4 for Ti–Fe–Al2O3) and decreases the probability of intermetallic compound formation. Of importance for Ti–Al–Fe2O3 is the mode of mixing as it determines the stages of mesoscale processes.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Klimov, D.A., Myktybekov, B., Nizovtsev, V.E., and Ukhov, P.A., Perspective Application of Nanostructured Composite Materials Based on High-Melting Carbides and Oxides for Aerospace Objects, Trudy MAI, 2011, no. 46. www.mai.ru/science/trudy
2. Falodun, O.E., Obadele, B.A., Oke, S.R., Okoro, A.M., and Olubambi, P.A., Titanium-Based Matrix Composites Reinforced with Particulate, Microstructure, and Mechanical Properties Using Spark Plasma Sintering Technique: A Review, Int. J. Adv. Manuf. Technol., 2019, vol. 102, pp. 1689–1701. https://doi.org/10.1007/s00170-018-03281-x10.1007/s00170-018-03281-x ↗
3. Yeh, Ch.-L. and Ke, Ch.-Y., Combustion Synthesis of FeAl–Al2O3 Composites with TiB2 and TiC Additions via Metallothermic Reduction of Fe2O3 and TiO2, Trans. Nonferrous Met. Soc. China, 2020, vol. 30, pp. 2510–2517. https://doi.org/10.1016/S1003-6326(20)65397-310.1016/S1003-6326(20)65397-3 ↗
4. Yeh, C.L. and Ke, C.Y., Synthesis of TiB2–Al2O3–FeAl Composites Via Self-Sustaining Combustion with Fe2O3/ TiO2-Based Thermite Mixtures, Ceramics Int., 2018, vol. 44, pp. 16030–16034. https://doi.org/10.1016/j.ceramint.2018.06.04010.1016/j.ceramint.2018.06.040 ↗
5. Leyens, C. and Peters, M., Titanium and Titanium Alloys: Fundamentals and Applications, Weinheim: Wiley-VCH, 2003. https://onlinelibrary.wiley.com/doi/book/10.1002/352760211910.1002/3527602119 ↗
6. Kolli, R.P. and Devaraj, A., A Review of Metastable beta Titanium Alloys, Metals, 2018, vol. 8(7), p. 506. https://doi.org/10.3390/met807050610.3390/met8070506 ↗
7. Yatsenko, I.V., Samboruk, A.R., and Kuznets, E.A., Production of TiС + Al2O3 + AlFe Composite from Granulated Batch by Using SHS, Sovr. Mater. Tekh. Tekhnol., 2016, no. 3(6), pp. 149–153.
8. Musa, C., Licheri, R., Locci, A.M., Orru, R., Cao, G., Rodriguez, M.A., and Jaworska, L., Energy Efficiency during Conventional and Novel Sintering Processes: The Case of Ti–Al2O3–TiC Composites, J. Clean. Product., 2009, vol. 17, pp. 877–882. https://doi.org/10.1016/j.jclepro.2009.01.01210.1016/j.jclepro.2009.01.012 ↗
9. Yan, Y., Zou, J., Zhang, X., Xiao, Q., Chen, B., Huang, F., Li, X., Yang, B., and Liang, T., Investigation on Microstructure and Properties of TiC0.5–Al2O3/Cu Composites Fabricated by a Novel In-Situ Reactive Synthesis, Ceramics Int., 2021, vol. 47, pp. 18858–18865. https://doi.org/10.1016/j.ceramint.2021.03.22510.1016/j.ceramint.2021.03.225 ↗
10. Kobyakov, V.P. and Kovalev, D.Yu., Phase Constitution of the Combustion Products of Thermite Mixtures Modified by Titanium Oxide, Combust. Expl. Shock Waves, 2007, vol. 43, no. 6, pp. 674–681. https://doi.org/10.1007/s10573-007-0090-610.1007/s10573-007-0090-6 ↗
11. Oke, S.R., Falodun, O.E., Motsa, B.G., Ige, O.O., and Olubambi, P.A., Spark Plasma Sintering of Al-Ti-Al2O3 Composite, ICMPC-2019. Mater. Today Proc., 2019, vol. 18, pp. 3946–3951. https://doi.org/10.1016/j.matpr.2019.07.33510.1016/j.matpr.2019.07.335 ↗
12. Matsugi, K., Kuramoto, H., Hatayama, T., and Yanagisawa, O., Temperature Distribution at Steady State under Constant Current Discharge in Spark Sintering Process of Ti and Al2O3 Powders, J. Mater. Process. Technol., 2004, vol. 146, pp. 274–281. https://doi.org/10.1016/j.jmatprotec.2003.11.00210.1016/j.jmatprotec.2003.11.002 ↗
13. Bakulin, A.V., Kulkov, S.S., and Kulkova, S.E., Adhesive Properties of the TiAl/Al2O3 Interfaces, Russ. Phys. J., 2020, vol. 63, pp. 3–9. https://doi.org/10.1007/s11182-020-02089-110.1007/s11182-020-02089-1 ↗
14. Bakulin, A.V., Hocker, S., and Kulkova, S.E., Role of Intermediate Metal and Oxide Layers in Change of Adhesion Properties of TiAl/Al2O3 Interface, Phys. Mesomech., 2021, vol. 24, no. 5, pp. 523–532. https://doi.org/10.1134/S102995992105003910.1134/S1029959921050039 ↗
15. Cai, Z.H. and Zhang, D.L., Sintering Behaviour and Microstructures of Ti(Al, O)/Al2O3, Ti3Al(O)/Al2O3 and TiAl(O)/Al2O3 In Situ Composites, Mater. Sci. Eng. A, 2006, vol. 419, pp. 310–317. https://doi.org/10.1016/j.msea.2006.01.03010.1016/j.msea.2006.01.030 ↗
16. Rafiei, M., Enayati, M.H., and Karimzadeh, F., Kinetic Analysis of Thermite Reaction in Al–Ti–Fe2O3 System to Produce (Fe, Ti)3Al–Al2O3 Nanocomposite, Powder Technol., 2014, vol. 253, pp. 553–560. https://doi.org/10.1016/j.powtec.2013.12.02810.1016/j.powtec.2013.12.028 ↗
17. Varma, A., Rogachev, A.S., Mukasyan, A.S., and Hwang, S., Combustion Synthesis of Advanced Materials: Principles and Applications, Adv. Chem. Eng., 1998, vol. 24, pp. 79–226. https://doi.org/10.1016/S0065-2377(08)60093-910.1016/S0065-2377(08)60093-9 ↗
18. Kobyakov, V.P. and Kovalev, D.Yu., Effect of Heat Release Conditions on the Phase Composition of the Combustion Products of a Fe2O3/TiO2/Al/C Thermite Mixture, Combust. Explos. Shock Waves, 2008, vol. 44, no. 4, pp. 405–409. https://doi.org/10.1007/s10573-008-0066-110.1007/s10573-008-0066-1 ↗
19. Gao, Z.-F., Wu, Z.-J., and Liu, W.-M., Preparation and Chemical Looping Combustion Properties of Fe2O3/Al2O3 Derived from Metallurgy Iron-Bearing Dust, J. Environment. Chem. Eng., 2016, vol. 4, pp. 1653–1663. https://doi.org/10.1016/j.jece.2016.02.03110.1016/j.jece.2016.02.031 ↗
20. Rogachev, A.S. and Mukasyan, A.G., Combustion for Materials Synthesis: Introduction to Structural Macrokinetics, CRC Press, 2014. https://www.routledge.com/Combustion-for-Material-Synthesis/Rogachev-Mukasyan/p/book/978148223951510.1201/b17842 ↗
21. Smolyakov, V.K., Maksimov, Yu.M., and Prokofiev, V.G., Dynamics of Structure Formation in Combustion Products of Gasless Systems, Mathematical Modeling of Combustion and Explosion of High-Energy Systems, Vesenin, I.M., Ed., Tomsk: Tomsk State Univ. Press, 2006, pp. 221–315.
22. Smolyakov, V.K., Structural Mechanics of a Substance in the Wave of Self-Propagating High-Temperature Synthesis, Phys. Mesomech., 1999, vol. 2, no. 3, p. 55.
23. Baras, F. and Kondepudi, D., A Multilayer Model for Self-Propagating High-Temperature Synthesis of Intermetallic Compounds, J. Phys. Chem. B, 2007, vol. 111, pp. 6457–6468. https://pubs.acs.org/doi/10.1021/jp066776p10.1021/jp066776p ↗
24. Knyazeva, A. and Kryukova, O., Simulation of the Synthesis of Multiphase Composites on a Substrate, Taking into Account the Staging of Chemical Reactions, Appl. Solid State Chem., 2019, no. 1, pp. 32–44. https://doi.org/10.18572/2619-0141-2018-2-3-2-1610.18572/2619-0141-2018-2-3-2-16 ↗
25. Makarov, P.V., Beketov, K.A., Atamanov, O.A., and Kulkov, S.N., Tough Structural Ceramics, in Physical Mesomechanics of Heterogeneous Media and Computer-Aided Design of Materials, Cambridge: Cambridge Int. Sci. Publ., 1995, pp. 298–312. http://www.demon.co.uk/cambsci/homepaje.htm
26. Skorokhod, V.V., Solonin, Yu.M., and Uvarov, I.V., Chemical, Diffusion, and Rheological Processes in Powder Materials Technologies, Kiev: Naukova Dumka, 1990.
27. Andrievsky, R.A. and Ragulya A.V., Nanostructured Materials. Textbook, Moscow: Academia, 2005.
28. Panin, V.E., The Physical Foundations of the Mesomechanics of a Medium with Structure, Russ. Phys. J., 1992, vol. 35, no. 4, pp. 305–315. https://doi.org/10.3103/S002565441004002310.3103/S0025654410040023 ↗
29. Nekrasov, E.A., Maksimov, Yu.M., and Adlushin, A.P., Calculations of Critical Thermal Explosion Conditions in Hafnium–Boron and Tantalum–Carbon Systems Using State Diagrams, Combust, Explos. Shock Waves, 1980, vol. 16, no. 3, pp. 342–347. https://link.springer.com/content/pdf/10.1007/BF00742138.pdf10.1007/BF00742138 ↗
30. Filimonov, V.Yu, and Koshelev, K.B., Adiabatic Thermal Explosion in Disperse Condensed Systems with Limited Solubility of the Reactants in the Product Layer, Combust. Explos. Shock Waves, 2013, vol. 49, no. 4, pp. 463–471. https://doi.org/10.1134/S001050821304009610.1134/S0010508213040096 ↗
31. Lapshin, O.V. and Ovcharenko, V.E., A Mathematical Model of High-Temperature Synthesis of Nickel Aluminide Ni3Al by Thermal Shock of a Powder Mixture of Pure Elements, Combust. Explos. Shock Waves, 1996, vol. 32, no. 3, pp. 299–305. https://doi.org/10.1007/BF0199846010.1007/BF01998460 ↗
32. Evstegneev, V.V., Filionov, V.Yu, and Koshelev, K.B., Mathematical Model of Phase-Formation Processes in a Binary Mixture of Ti and Al Powders in the Regime of a Nonadiabatic Thermal Explosion, Combust. Explos. Shock Waves, 2007, vol. 43, no. 2, pp. 170–175. https://doi.org/10.1007/s10573-007-0023-410.1007/s10573-007-0023-4 ↗
33. Knyazeva, A.G., Sorokova, S.N., Pobol, A.I., and Goransky, G.G., Modeling of Pulse Electrocontact Sintering of Hard-Alloy Compounds, Chem. Phys. Mesoscop., 2015, vol. 17, no. 2, pp. 239–252.
34. Sorokova, S.N., Knyazeva, A.G., Pobol, A.I., and Goranskyi, G.G., Mathematical Modeling of Pulsed Electric-Sintering Powders, Appl. Mech. Mater., 2015, vol. 756, pp. 534–539. https://doi.org/10.4028/www.scientific.net/AMM.756.53410.4028/www.scientific.net/AMM.756.534 ↗
35. Knyazeva, A.G. and Buyakova, S.P., Mathematical Model of Three-Layer Composite Synthesis during Hot Isostatic Pressing, AIP Conf. Proc., 2016, vol. 1783, p. 020092. https://doi.org/10.1063/1.496638510.1063/1.4966385 ↗
36. Olevsky, E. and Froyen, L., Constitutive Modeling of Spark-Plasma Sintering of Conductive Materials, Scripta Mater., 2006, vol. 55, pp. 1175–1178. https://doi.org/10.1016/j.scriptamat.2006.07.00910.1016/j.scriptamat.2006.07.009 ↗
37. Olevsky, E., Tikare, V., and Garino, T., Multiscale Modeling of Sintering: A Review, J. Am. Ceram. Soc., 2006, vol. 89(6), pp. 1914–1922. https://doi.org/10.1111/j.1551-2916.2006.01054.x10.1111/j.1551-2916.2006.01054.x ↗
38. Yang, Y., Ragnvaldsen, O., Bai, Y., Yi, M., and Xu, B.-X., 3D Non-Isothermal Phase-Field Simulation of Microstructure Evolution during Selective Laser Sintering, npj Comput. Mater., 2019, vol. 5, article 81. https://doi.org/10.1038/s41524-019-0219-710.1038/s41524-019-0219-7 ↗
39. Jones, W.D., Fundamental Principles of Powder Metallurgy, London: E. Arnold Ltd., 1960.
40. German, R.M., Powder Metallurgy and Particulate Materials Processing, Princeton, NJ, USA: Metal Powder Industries Federation, 2005.
41. Geguzin, Yu.E., Physics of Sintering, Moscow: Nauka, 1984.
42. Phase Diagrams of Binary Metal Systems: Reference Book, Lyakishev, N.P., Ed., Moscow: Metallurgia, 1996.
43. Mei, J., Halldearn, R.D., and Xiao, P., Mechanisms of the Aluminium-Iron Oxide Thermite Reaction, J. Scripta Mater., 1999, vol. 41(5), pp. 541–548. https://doi.org/10.1016/S1359-6462(99)00148-710.1016/S1359-6462(99)00148-7 ↗
44. Wang, Yi., Song, X., Jiang, W., Deng, G., Guo, X., Liu, H., and Li, F., Mechanism for Thermite Reactions of Aluminum/Iron-Oxide Nanocomposites Based on Residue Analysis, Trans. Nonferrous Met. Soc. China, 2014, vol. 24, pp. 263–270. https://doi.org/10.1016/S1003-6326(14)63056-910.1016/S1003-6326(14)63056-9 ↗
45. Loginov, P.A., Levashov, E.A., Potanin, A.Yu., Kudryashov, A.E., Manakova, O.S., Shvyndina, N.V., and Sukhorukova, I.V., Peculiarities of Formation of Sintered Electrodes of the Ti–Ti3P–CaO Composition and Their Application in Technology of Pulsed Electric-Discharge Machining of Titanium, Izv. Vyssh. Uchebn. Zaved. Poroshk. Metall. Funkts. Pokryt., 2015, vol. 4. pp. 45–58. dx.doi.org/10.17073/1997-308X-2015-4-45-5810.17073/1997-308X-2015-4-45-58 ↗
46. Boldyrev, V.V., Mechanochemical Processes with the Reaction-Induced Mechanical Activation. Chemo-Mechanical Effect, Russ. Chem. Bull., 2018, vol. 67, pp. 933–948. https://doi.org/10.1007/s11172-018-2162-z10.1007/s11172-018-2162-z ↗
47. Kachanov, M. and Sevostianov, I., Micromechanics of Materials, with Applications, Bøger: Springer, 2018. https://link.springer.com/book/10.1007/978-3-319-76204-310.1007/978-3-319-76204-3 ↗
48. Chen, Y., Ma, Y., Yin, Q., Pan, F., Cui, C., Zhang, Z., and Liu, B., Advances in Mechanics of Hierarchical Composite Materials, Compos. Sci. Technol., 2021, vol. 214, p. 108970. https://doi.org/10.1016/j.compscitech.2021.10897010.1016/j.compscitech.2021.108970 ↗
49. Tsalis, D., Charalambakis, N., Bonnay, K., and Chatzigeorgiou, G., Effective Properties of Multiphase Composites Made of Elastic Materials with Hierarchical Structure, Math. Mech. Solids, 2017, vol. 22, no. 4, pp. 751–770. https://doi.org/10.1177/108128651561214210.1177/1081286515612142 ↗
50. Brinson, L.C. and Lin, W.S., Comparison of Micromechanics Methods for Effective Properties of Multiphase Viscoelastic Composites, Compos. Struct., 1998, vol. 41, no. 3–4, pp. 353–367. https://doi.org/10.1016/S0263-8223(98)00019-110.1016/S0263-8223(98)00019-1 ↗
51. Wang, M. and Pan, N., Predictions of Effective Physical Properties of Complex Multiphase Materials, Mater. Sci. Eng. R, 2008, vol. 63, pp. 1–30. https://doi.org/10.1016/j.mser.2008.07.00110.1016/j.mser.2008.07.001 ↗
52. Guo, Q., Yao, W., Li, W., and Gupta, N., Constitutive Models for the Structural Analysis of Composite Materials for the Finite Element Analysis: A Review of Recent Practices, Compos. Struct., 2021, vol. 260, p. 113267. https://doi.org/10.1016/j.compstruct.2020.11326710.1016/j.compstruct.2020.113267 ↗