DataVXPhysical MesomechanicsPaper
journal article·2023-04

Microstructure, Biodegradation, and Mechanical Properties of Biodegradable Mg-Based Alloy Containing Calcium for Biomedical Applications

A. Rezaei-Baravati, M. Kasiri-Asgarani, H. R. Bakhsheshi-Rad, M. Omidi, E. Karamian

Physical Mesomechanics· Volume 26· Issue 2
Publisher page
Source abstract

Abstract

Abstract The influence of Ca on the microstructure characterization, mechanical performance, corrosion behavior, and cytocompatibility of Mg-Zn-Al magnesium alloy was studied. Mg-Zn-Al and Mg-Zn-Al-xCa alloys were evaluated as cast. Scanning electron microscopy demonstrated that the microstructure of the Ca-containing alloys was substantially finer and more uniform than the standard Mg-Zn-Al alloy. Hardness and compressive strength tests revealed that the addition of Ca boosted hardness and compressive strength while decreasing ductility. The corrosion resistance of the investigated alloys was enhanced initially but dropped as the Ca concentration increased. The corrosion resistance performance of Mg-Zn-Al-0.5Ca alloy was the best, with a corrosion rate of 3.7 mm/y due to the specific microstructure and dense products related to the corrosion on the sample surface. Cytotoxicity experiments showed that Mg-based alloys with a low Ca content have higher cell viability than Mg-Zn-Al and Mg-based alloys with a high Ca concentration, indicating improved biocompatibility. As a result, Mg-Zn-Al-0.5Ca alloys can be termed alloys with superior corrosion resistance and great mechanical properties that display high corrosion resistance as well as good biocompatibility.
Source: openalex_inverted_index · Quality: baseline

Research context

Metals & alloysBiomaterials

OpenAlex topics: Magnesium Alloys: Properties and Applications · Hydrogen Storage and Materials · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (79)

Show source-provided references
1. Han, H.-S., Minghui, Y., Seok, H.-K., Byun, J.-Y., Cha, P.-R., Yang, S.-J., and Kim, Y.C., The Modification of Microstructure to Improve the Biodegradation and Mechanical Properties of a Biodegradable Mg Alloy, J. Mech. Behav. Biomed. Mater., 2013, vol. 20, pp. 54–60. https://doi.org/10.1016/j.jmbbm.2012.12.00710.1016/j.jmbbm.2012.12.007 ↗
2. Li, Y., Wen, C., Mushahary, D., Sravanthi, R., Harishankar, N., Pande, G., and Hodgson, P., Mg–Zr–Sr Alloys as Biodegradable Implant Materials, Acta Biomater., 2012, vol. 8, no. 8, pp. 3177–3188. https://doi.org/10.1016/j.actbio.2012.04.02810.1016/j.actbio.2012.04.028 ↗
3. Kumar, K., Gill, R., and Batra, U., Challenges and Opportunities for Biodegradable Magnesium Alloy Implants, Mater. Technol., 2018, vol. 33, no. 2, pp. 153–172. https://doi.org/10.1080/10667857.2017.137797310.1080/10667857.2017.1377973 ↗
4. Sharipova, A.F., Psakhie, S.G., Gotman, I., and Gutmanas, E.Y., Smart Nanocomposites Based on Fe–Ag and Fe–Cu Nanopowders for Biodegradable High-Strength Implants with Slow Drug Release, Phys. Mesomech., 2020, vol. 23, no. 2, pp. 128–134. https://doi.org/10.1134/S102995992002004610.1134/S1029959920020046 ↗
5. Sumitomo, T., Cáceres, C., and Veidt, M., The Elastic Modulus of Cast Mg–Al–Zn Alloys, J. Light Met., 2002, vol. 2, no. 1, pp. 49–56. https://doi.org/10.1016/S1471-5317(02)00013-510.1016/S1471-5317(02)00013-5 ↗
6. Hunt, K., O'Loughlin, V.D., Fitting, D., and Adler, L., Ultrasonic Determination of the Elastic Modulus of Human Cortical Bone, Med. Biol. Eng. Comput., 1998, vol. 36, no. 1, pp. 51–56. https://doi.org/10.1007/BF0252285710.1007/BF02522857 ↗
7. Shuai, C., Li, S., Peng, S., Feng, P., Lai, Y., and Gao, C., Biodegradable Metallic Bone Implants, Mater. Chem. Front., 2019, vol. 3, no. 4, pp. 544–562. https://doi.org/10.1039/C8QM00507A10.1039/C8QM00507A ↗
8. Kumar, R. and Katyal, P., Effects of Alloying Elements on Performance of Biodegradable Magnesium Alloy, Mater. Today. Proc., 2022, vol. 56, pp. 2443–2450. https://doi.org/10.1016/j.matpr.2021.08.23310.1016/j.matpr.2021.08.233 ↗
9. Tadic, D. and Epple, M., A Thorough Physicochemical Characterisation of 14 Calcium Phosphate-Based Bone Substitution Materials in Comparison to Natural Bone, Biomaterials, 2004, vol. 25, no. 6, pp. 987–994. https://doi.org/10.1016/S0142-9612(03)00621-510.1016/S0142-9612(03)00621-5 ↗
10. Dorozhkin, S.V. and Epple, M., Biological and Medical Significance of Calcium Phosphates, Angew. Chem., Int. Ed., 2002, vol. 41, no. 17, pp. 3130–3146. https://doi.org/10.1002/1521-3773(20020902)4110.1002/1521-3773(20020902)41 ↗
11. Pan, Y., He, S., Wang, D., Huang, D., Zheng, T., Wang, S., Dong, P., and Chen, C., In Vitro Degradation and Electrochemical Corrosion Evaluations of Microarc Oxidized Pure Mg, Mg–Ca and Mg–Ca–Zn Alloys for Biomedical Applications, Mater. Sci. Eng. C, 2015, vol. 47, pp. 85–96. https://doi.org/10.1016/j.msec.2014.11.04810.1016/j.msec.2014.11.048 ↗
12. Chen, J., Tan, L., and Yang, K., Recent Advances on the Development of Biodegradable Magnesium Alloys: A Review, Mater. Technol., 2016, vol. 31, no. 12, pp. 681–688. https://doi.org/10.1080/10667857.2016.121258710.1080/10667857.2016.1212587 ↗
13. Shchitsyn, Yu.D., Krivonosova, E.A., Neulybin, S.D., Nikulin, R.G., Hassel, T., and Trushnikov, D.N., Characteristics of Structure and Properties of Magnesium Alloys during Plasma Additive Deposition, Phys. Mesomech., 2021, vol. 24, no. 6, pp. 716–723. https://doi.org/10.1134/S102995992106010210.1134/S1029959921060102 ↗
14. Saberi, A., Bakhsheshi-Rad, H.R., Karamian, E., Kasiri-Asgarani, M., Ghomi, H., Omidi, M., Abazari, S., Ismail, A.F., Sharif, S., and Berto, F., Synthesis and Characterization of Hot Extruded Magnesium-Zinc Nano-Composites Containing Low Content of Graphene Oxide for Implant Applications, Phys. Mesomech., 2021, vol. 24, no. 4, pp. 486–502. https://doi.org/10.1134/S102995992104013510.1134/S1029959921040135 ↗
15. Lu, Y., Bradshaw, A., Chiu, Y.-L., and Jones, I., Effects of Secondary Phase and Grain Size on the Corrosion Of Biodegradable Mg–Zn–Ca Alloys, Mater. Sci. Eng. C, 2015, vol. 48, pp. 480–486. https://doi.org/10.1016/j.msec.2014.12.04910.1016/j.msec.2014.12.049 ↗
16. Surmeneva, M., Vladescu, A., Cotrut, C., Tyurin, A., Pirozhkova, T., Shuvarin, I., Elkin, B., Oehr, C., and Surmenev, R., Effect of Parylene C Coating on the Antibiocorrosive and Mechanical Properties of Different Magnesium Alloys, Appl. Surf. Sci., 2018, vol. 427, pp. 617–627. https://doi.org/10.1016/j.apsusc.2017.08.06610.1016/j.apsusc.2017.08.066 ↗
17. Zhou, Y.-L., Li, Y., Luo, D.-M., Ding, Y., and Hodgson, P., Microstructures, Mechanical and Corrosion Properties and Biocompatibility of as Extruded Mg–Mn–Zn–Nd Alloys for Biomedical Applications, Mater. Sci. Eng. C, 2015, vol. 49, pp. 93–100. https://doi.org/10.1016/j.msec.2014.12.05710.1016/j.msec.2014.12.057 ↗
18. Yang, W., Zhang, P., Liu, J., and Xue, Y., Effect of Long-Term Intake of Y3+ in Drinking Water on Gene Expression in Brains of Rats, J. Rare Earths, 2006, vol. 24, no. 3, pp. 369–373. https://doi.org/10.1016/S1002-0721(06)60126-910.1016/S1002-0721(06)60126-9 ↗
19. Nakamura, Y., Tsumura, Y., Tonogai, Y., Shibata, T., and Ito, Y., Differences in Behavior among the Chlorides of Seven Rare Earth Elements Administered Intravenously to Rats, Toxicol. Sci., 1997, vol. 37, no. 2, pp. 106–116. https://doi.org/10.1093/toxsci/37.2.10610.1093/toxsci/37.2.106 ↗
20. Abd El-Rahman, S.S., Neuropathology of Aluminum Toxicity in Rats (Glutamate and GABA Impairment), Pharmacol. Res., 2003, vol. 47, no. 3, pp. 189–194. https://doi.org/10.1016/S1043-6618(02)00336-510.1016/S1043-6618(02)00336-5 ↗
21. Song, G., Control of Biodegradation of Biocompatable Magnesium Alloys, Corros. Sci., 2007, vol. 49, no. 4, pp. 1696–1701. https://doi.org/10.1016/j.corsci.2007.01.00110.1016/j.corsci.2007.01.001 ↗
22. Tan, L., J. Dong, J. Chen, and K. Yang, Development of Magnesium Alloys for Biomedical Applications: Structure, Process to Property Relationship, Mater. Technol., 2018, vol. 33, no. 3, pp. 235–243. https://doi.org/10.1080/10667857.2017.140589010.1080/10667857.2017.1405890 ↗
23. Tashkinov, M.A. and Shalimov, A.S., Modeling of the Effect of Microscale Morphological Parameters on the Deformation Behavior of Porous Materials with a Metal Matrix, Phys. Mesomech., 2021, vol. 24, no. 5, pp. 618–624. https://doi.org/10.1134/S102995992105013110.1134/S1029959921050131 ↗
24. Panin, A.V. and Shugurov, A.R., Local Curvature of Internal and External Interfaces in Mass Transfer Responsible for Thin Film Degradation, Phys. Mesomech., 2013, vol. 16, no. 4, pp. 348–354. https://doi.org/10.1134/S102995991304008510.1134/S1029959913040085 ↗
25. Zhang, E., Yang, L., Xu, J., and Chen, H., Microstructure, Mechanical Properties and Bio-Corrosion Properties of Mg–Si (–Ca, Zn) alloy for Biomedical Application, Acta Biomater., 2010, vol. 6, no. 5, pp. 1756–1762. https://doi.org/10.1016/j.actbio.2009.11.02410.1016/j.actbio.2009.11.024 ↗
26. Nam, N.D., Corrosion Behavior of Mg–5Al Based Magnesium Alloy with 1 wt % Sn, Mn and Zn Additions in 3.5 wt % NaCl Solution, J. Magnesium Alloys, 2014, vol. 2, no. 2, pp. 190–195. https://doi.org/10.1016/j.jma.2014.06.00210.1016/j.jma.2014.06.002 ↗
27. Zhang, E. and Yang, L., Microstructure, Mechanical Properties and Bio-Corrosion Properties of Mg–Zn–Mn–Ca Alloy for Biomedical Application, Mater. Sci. Eng. A, 2008, vol. 497, no. 1–2, pp. 111–118. https://doi.org/10.1016/j.msea.2008.06.01910.1016/j.msea.2008.06.019 ↗
28. Homayun, B. and Afshar, A., Microstructure, Mechanical Properties, Corrosion Behavior and Cytotoxicity of Mg-Zn-Al-Ca Alloys as Biodegradable Materials, J. Alloys Compd., 2014, vol. 607, pp. 1–10. https://doi.org/10.1016/j.jallcom.2014.04.05910.1016/j.jallcom.2014.04.059 ↗
29. Kamado, S., Ikeya, N., Rudi, R.S., Araki, T., and Kojima, Y., Application of Semi-Solid Forming to Mg-Zn-Al-Ca Alloys, Mater. Sci. Forum. Trans. Tech. Publ., 2000, p. 205. https://doi.org/10.4028/www.scientific.net/MSF.350-351.20510.4028/www.scientific.net/MSF.350-351.205 ↗
30. Zhang, W., Xiao, W., Wang, F., and Ma, C., Development of Heat Resistant Mg-Zn-Al-Based Magnesium Alloys by Addition of La and Ca: Microstructure and Tensile Properties, J. Alloys Compd., 2016, vol. 684, pp. 8–14. https://doi.org/10.1016/j.jallcom.2016.05.13710.1016/j.jallcom.2016.05.137 ↗
31. Nakata, T., Xu, C., Binti Osman, N.A.S., Geng, L., and Kamado, S., Development of corrosion-resistant Mg-Al-Ca-Mn-Zn alloy sheet with good tensile properties and stretch formability, J. Alloys Compd., 2022, vol. 910, p. 164752. https://doi.org/10.1016/j.jallcom.2022.16475210.1016/j.jallcom.2022.164752 ↗
32. Bian, M., Huang, X., and Chino, Y., Substantial Improvement in Cold Formability of Concentrated Mg–Al–Zn–Ca Alloy Sheets by High Temperature Final Rolling, Acta Mater., 2021, vol. 220, p. 117328. https://doi.org/10.1016/j.actamat.2021.11732810.1016/j.actamat.2021.117328 ↗
33. Du, Y., Qiao, X., Zheng, M.-Y., Wang, D., Wu, K., and Golovin, I., Effect of Microalloying with Ca on the Microstructure and Mechanical Properties of Mg–6 mass % Zn Alloys, Mater. Des., 2016, vol. 98, pp. 285–293. https://doi.org/10.1016/j.matdes.2016.03.02510.1016/j.matdes.2016.03.025 ↗
34. Ciapetti, G., Granchi, D., Stea, S., Savarino, L., Verri, E., Gori, A., Savioli, F., and Montanaro, L., Cytotoxicity Testing of Materials with Limited In Vivo Exposure Is Affected by the Duration of Cell–Material Contact, J. Biomed. Mater. Res. A, 1998, vol. 42, no. 4, pp. 485–490. https://doi.org/10.1002/(SICI)1097-4636(19981215)4210.1002/(SICI)1097-4636(19981215)42 ↗
35. Montanaro, L., Arciola, C., Cenni, E., Ciapetti, G., Savioli, F., Filippini, F., and Barsanti, L., Cytotoxicity, Blood Compatibility and Antimicrobial Activity of Two Cyanoacrylate Glues for Surgical Use, Biomaterials, 2000, vol. 22, no. 1, pp. 59–66. https://doi.org/10.1016/S0142-9612(00)00163-010.1016/S0142-9612(00)00163-0 ↗
36. Wang, Y., He, Y., Zhu, Z., Jiang, Y., Zhang, J., Niu, J., Mao, L., and Yuan, G., In Vitro Degradation and Biocompatibility of Mg-Nd-Zn-Zr Alloy, Chin. Sci. Bull., 2012, vol. 57, no. 17, pp. 2163–2170. https://doi.org/10.1007/s11434-012-5066-610.1007/s11434-012-5066-6 ↗
37. Gao, J.-C., Qiao, L.-Y., and Xin, R.-L., Effect of Mg2+ Concentration on Biocompatibility of Pure Magnesium, Front. Mater. Sci., 2010, vol. 4, no. 2, pp. 126–131. https://doi.org/10.1007/s11706-010-0030-310.1007/s11706-010-0030-3 ↗
38. Han, H.-S., Kim, H.-K., Kim, Y.-C., Seok, H.-K., and Kim, Y.-Y., Conventional and Improved Cytotoxicity Test Methods of Newly Developed Biodegradable Magnesium Alloys, Met. Mater. Int., 2015, vol. 21, no. 6, pp. 1108–1117. https://doi.org/10.1007/s12540-015-5069-310.1007/s12540-015-5069-3 ↗
39. Zheng, Q., Wang, Z., Sun, Z., Wen, J., Duan, T., and Zhang, B., In Vivo and In Vitro Performances of Chitosan-Coated Mg–Zn–Zr–Gd–Ca Alloys as Bone Biodegradable Materials in Rat Models, J. Biomater. Appl., 2022, vol. 36, no. 10, pp. 1786–1799. https://doi.org/10.1177/0885328221105238510.1177/08853282211052385 ↗
40. Harandi, S.E., Mirshahi, M., Koleini, S., Idris, M.H., Jafari, H., and Kadir, M.R.A., Effect of Calcium Content on the Microstructure, Hardness and In-Vitro Corrosion Behavior of Biodegradable Mg-Ca Binary Alloy, Mater. Res., 2013, vol. 16, no. 1, pp. 11–18. https://doi.org/10.1590/S1516-1439201200500015110.1590/S1516-14392012005000151 ↗
41. Zhang, X., Dai, J., Yang, H., Liu, S., He, X., and Wang, Z., Influence of Gd and Ca on Microstructure, Mechanical and Corrosion Properties of Mg–Gd–Zn(–Ca) Alloys, Mater. Technol., 2017, vol. 32, no. 7, pp. 399–408. https://doi.org/10.1080/10667857.2016.126231010.1080/10667857.2016.1262310 ↗
42. Armstrong, R.W., Dislocation and Grain Size Roles in Physical Mesomechanics, Phys. Mesomech., 2021, vol. 24, no. 4, pp. 418–425. https://doi.org/10.1134/S102995992104006810.1134/S1029959921040068 ↗
43. Liu, Q., Cheng, W., Zhang, H., Xu, C., and Zhang, J., The Role of Ca on the Microstructure and Corrosion Behavior of Mg–8Sn–1Al–1Zn–Ca Alloys, J. Alloys Compd., 2014, vol. 590, pp. 162–167. https://doi.org/10.1016/j.jallcom.2013.12.07710.1016/j.jallcom.2013.12.077 ↗
44. Chaudry, U.M., Hamad, K., and Ko, Y.G., Effect of Calcium on the Superplastic Behavior of AZ31 Magnesium Alloy, Mater. Sci. Eng. A, 2021, vol. 815, p. 140874. https://doi.org/10.1016/j.msea.2021.14087410.1016/j.msea.2021.140874 ↗
45. Zheng, M., Xu, G., Liu, D., Zhao, Y., Ning, B., and Chen, M., Study on the Microstructure, Mechanical Properties and Corrosion Behavior of Mg-Zn-Ca Alloy Wire for Biomaterial Application, J. Mater. Eng. Perform., 2018, vol. 27, no. 4, pp. 1837–1846. https://doi.org/10.1007/s11665-018-3278-x10.1007/s11665-018-3278-x ↗
46. Mandal, M., Moon, A., Deo, G., Mendis, C., and Mondal, K., Corrosion Behavior of Mg–2.4Zn Alloy Micro-Alloyed with Ag and Ca, Corros. Sci., 2014, vol. 78, pp. 172–182. https://doi.org/10.1016/j.corsci.2013.09.01210.1016/j.corsci.2013.09.012 ↗
47. Kim, J.H., Kang, N.E., Yim, C.D., and Kim, B.K., Effect of Calcium Content on the Microstructural Evolution and Mechanical Properties of Wrought Mg–3Al–1Zn Alloy, Mater. Sci. Eng. A, 2009, vol. 525, no. 1–2, pp. 18–29. https://doi.org/10.1016/j.msea.2009.07.04810.1016/j.msea.2009.07.048 ↗
48. Jeong, Y. and Kim, W., Enhancement of Mechanical Properties and Corrosion Resistance of Mg–Ca Alloys through Microstructural Refinement by Indirect Extrusion, Corros. Sci., 2014, vol. 82, pp. 392–403. https://doi.org/10.1016/j.corsci.2014.01.04110.1016/j.corsci.2014.01.041 ↗
49. Kang, Q., Jiang, H., Zhang, Y., Xu, Z., Li, H., and Xia, Z., Effect of Various Ca Content on Microstructure and Fracture Toughness of Extruded Mg-2Zn Alloys, J. Alloys Compd., 2018, vol. 742, pp. 1019–1030. https://doi.org/10.1016/j.jallcom.2017.11.27610.1016/j.jallcom.2017.11.276 ↗
50. Bohlen, J., Meyer, S., Wiese, B., Luthringer-Feyerabend, B.J., Willumeit-Römer, R., and Letzig, D., Alloying and Processing Effects on the Microstructure, Mechanical Properties, and Degradation Behavior of Extruded Magnesium Alloys Containing Calcium, Cerium, or Silver, Materials, 2020, vol. 13, no. 2, p. 391. https://doi.org/10.3390/ma1302039110.3390/ma13020391 ↗
51. Zeng, Z., Zhu, Y., Xu, S., Bian, M., Davies, C., Birbilis, N., and Nie, J., Texture Evolution during Static Recrystallization of Cold-Rolled Magnesium Alloys, Acta Mater., 2016, vol. 105, pp. 479–494. https://doi.org/10.1016/j.actamat.2015.12.04510.1016/j.actamat.2015.12.045 ↗
52. Golovnev, I.F., Golovneva, E.I., and Merzhievskii, L.A., Effect of Nanostructure Size on Parameters of Rotational Fields Induced by External Compressive Stress, Phys. Mesomech., 2018, vol. 21, no. 3, pp. 242–248. https://doi.org/10.1134/S102995991803008610.1134/S1029959918030086 ↗
53. Moskvichev, E.N., Skripnyak, V.A., Skripnyak, V.V., Kozulin, A.A., and Lychagin, D.V., Structure and Mechanical Properties of Aluminum 1560 Alloy after Severe Plastic Deformation by Groove Pressing, Phys. Mesomech., 2018, vol. 21, no. 6, pp. 515–522. https://doi.org/10.1134/S102995991806006110.1134/S1029959918060061 ↗
54. Zhang, B., Hou, Y., Wang, X., Wang, Y., and Geng, L., Mechanical Properties, Degradation Performance and Cytotoxicity of Mg–Zn–Ca Biomedical Alloys with Different Compositions, Mater. Sci. Eng. C, 2011, vol. 31, no. 8, pp. 1667–1673. https://doi.org/10.1016/j.msec.2011.07.01510.1016/j.msec.2011.07.015 ↗
55. Yin, D.-S., Zhang, E.-L., and Zeng, S.-Y., Effect of Zn on Mechanical Property and Corrosion Property of Extruded Mg-Zn-Mn Alloy, Trans. Nonferrous Met. Soc. China, 2008, vol. 18, no. 4, pp. 763–768. https://doi.org/10.1016/S1003-6326(08)60131-410.1016/S1003-6326(08)60131-4 ↗
56. Blajan, A.I., Miculescu, F., Ciucă, I., Cotrut, M.C., Semenescu, A., and Antoniac, V.I., Effect of Calcium Content on the Microstructure and Degradation of Mg-Ca Binary Alloys Potentially Used as Orthopedic Biomaterials, Key Eng. Mater. Trans. Tech. Publ., 2015, p. 104. https://doi.org/10.4028/www.scientific.net/KEM.638.10410.4028/www.scientific.net/KEM.638.104 ↗
57. Chaudry, U.M., Farooq, A., Bin Tayyab, K., Malik, A., Kamran, M., Kim, J.-G., Li, C., Hamad, K., and Jun, T.-S., Corrosion Behavior of AZ31 Magnesium Alloy with Calcium Addition, Corros. Sci., 2022, vol. 199, p. 110205. https://doi.org/10.1016/j.corsci.2022.11020510.1016/j.corsci.2022.110205 ↗
58. Bakhsheshi-Rad, H., Hamzah, E., Farahany, S., and Staiger, M.P., The Mechanical Properties and Corrosion Behavior of Quaternary Mg-6Zn-0.8Mn-xCa Alloys, J. Mater. Eng. Perform., 2015, vol. 24, no. 2, pp. 598–608. https://doi.org/10.1007/s11665-014-1271-610.1007/s11665-014-1271-6 ↗
59. Bakhsheshi-Rad, H., Hamzah, E., Fereidouni-Lotfabadi, A., Daroonparvar, M., Yajid, M., Mezbahul-Islam, M., Kasiri-Asgarani, M., and Medraj, M., Microstructure and Bio-Corrosion Behavior of Mg–Zn and Mg–Zn–Ca Alloys for Biomedical Applications, Mater. Corros., 2014, vol. 65, no. 12, pp. 1178–1187. https://doi.org/10.1002/maco.20130758810.1002/maco.201307588 ↗
60. Bakhsheshi-Rad, H., Hamzah, E., Daroonparvar, M., Kasiri-Asgarani, M., and Medraj, M., Synthesis and Biodegradation Evaluation of Nano-Si and Nano-Si/TiO2 Coatings on Biodegradable Mg–Ca Alloy in Simulated Body Fluid, Ceram. Int., 2014, vol. 40, no. 9, pp. 14009–14018. https://doi.org/10.1016/j.ceramint.2014.05.12610.1016/j.ceramint.2014.05.126 ↗
61. Bakhsheshi-Rad, H., Idris, M., Abdul-Kadir, M., Ourdjini, A., Medraj, M., Daroonparvar, M., and Hamzah, E., Mechanical and Bio-Corrosion Properties of Quaternary Mg–Ca–Mn–Zn Alloys Compared with Binary Mg–Ca Alloys, Mater. Des., 2014, vol. 53, pp. 283–292. https://doi.org/10.1016/j.matdes.2013.06.05510.1016/j.matdes.2013.06.055 ↗
62. Yang, J., Peng, J., Li, M., Nyberg, E.A., and Pan, F.S., Effects of Ca Addition on the Mechanical Properties and Corrosion Behavior of ZM21 Wrought Alloys, Acta Metall. Sin., 2017, vol. 30, no. 1, pp. 53–65. https://doi.org/10.1007/s40195-016-0492-010.1007/s40195-016-0492-0 ↗
63. Frignani, A., Grassi, V., Zanotto, F., and Zucchi, F., Inhibition of AZ31 Mg Alloy Corrosion by Anionic Surfactants, Corros. Sci., 2012, vol. 63, pp. 29–39. https://doi.org/10.1016/j.corsci.2012.05.01210.1016/j.corsci.2012.05.012 ↗
64. Woo, S.K., Blawert, C., Yasakau, K., Yi, S., Scharnagl, N., Suh, B.-C., Kim, Y.M., You, B.S., and Yim, C.D., Effects of combined addition of Ca and Y on the corrosion behaviours of die-cast AZ91D magnesium alloy, Corros. Sci., 2020, vol. 166, p. 108451. https://doi.org/10.1016/j.corsci.2020.10845110.1016/j.corsci.2020.108451 ↗
65. Zander, D. and Zumdick, N.A., Influence of Ca and Zn on the Microstructure and Corrosion of Biodegradable Mg–Ca–Zn Alloys, Corros. Sci., 2015, vol. 93, pp. 222–233. https://doi.org/10.1016/j.corsci.2015.01.02710.1016/j.corsci.2015.01.027 ↗
66. Jamesh, M.I., Wu, G., Zhao, Y., McKenzie, D.R., Bilek, M.M., and Chu, P.K., Effects of Zirconium and Oxygen Plasma Ion Implantation on the Corrosion Behavior of ZK60 Mg Alloy in Simulated Body Fluids, Corros. Sci., 2014, vol. 82, pp. 7–26. https://doi.org/10.1016/j.corsci.2013.11.04410.1016/j.corsci.2013.11.044 ↗
67. Kuhlmann, J., Bartsch, I., Willbold, E., Schuchardt, S., Holz, O., Hort, N., Höche, D., Heineman, W.R., and Witte, F., Fast Escape of Hydrogen From Gas Cavities Around Corroding Magnesium Implants, Acta Biomater., 2013, vol. 9, no. 10, pp. 8714–8721. https://doi.org/10.1016/j.actbio.2012.10.00810.1016/j.actbio.2012.10.008 ↗
68. Mohemi, K., Ahmadi, T., Jafarzadeh, A., Bakhsheshi-Rad, H.R., Taghian Dehaghani, M., and Berto, F., Synthesis, Corrosion, and Bioactivity Evaluation of the Hybrid Anodized Polycaprolactone Fumarate/Silicon- and Magnesium-Codoped Fluorapatite Nanocomposite Coating on AZ31 Magnesium Alloy, Phys. Mesomech., 2022, vol. 25, no. 1, pp. 85–96. https://doi.org/10.1134/S102995992201010610.1134/S1029959922010106 ↗
69. Zeng, R., Qi, W., Zhang, F., Cui, H., and Zheng, Y., In Vitro Corrosion of Mg–1.21Li–1.12Ca–1Y Alloy, Prog. Nat. Sci. Mater. Int., 2014, vol. 24, no. 5, pp. 492–499. https://doi.org/10.1016/j.pnsc.2014.08.00510.1016/j.pnsc.2014.08.005 ↗
70. Zeng, R.-C., Qi, W.-C., Cui, H.-Z., Zhang, F., Li, S.Q., and Han, E.-H., In Vitro Corrosion of As-Extruded Mg–Ca Alloys—The Influence of Ca Concentration, Corros. Sci., 2015, vol. 96, pp. 23–31. https://doi.org/10.1016/j.corsci.2015.03.01810.1016/j.corsci.2015.03.018 ↗
71. Baek, S.-M., Kim, H.J., Jeong, H.Y., Sohn, S.-D., Shin, H.-J., Choi, K.-J., Lee, K.-S., Lee, J.G., Yim, C.D., and You, B.S., Effect of Alloyed Ca on the Microstructure and Corrosion Properties of Extruded AZ61 Mg Alloy, Corros. Sci., 2016, vol. 112, pp. 44–53. https://doi.org/10.1016/j.corsci.2016.07.01110.1016/j.corsci.2016.07.011 ↗
72. Pulido-González, N., Torres, B., García-Rodríguez, S., Rodrigo, P., Bonache, V., Hidalgo-Manrique, P., Mohdano, M., and Rams, J., Mg–1Zn–1Ca Alloy for Biomedical Applications. Influence of the Secondary Phases on the Mechanical and Corrosion Behaviour, J. Alloys Compd., 2020, vol. 831, p. 154735. https://doi.org/10.1016/j.jallcom.2020.15473510.1016/j.jallcom.2020.154735 ↗
73. Feng, A. and Han, Y., Mechanical and In Vitro Degradation Behavior of Ultrafine Calcium Polyphosphate Reinforced Magnesium-Alloy Composites, Mater. Des., 2011, vol. 32, no. 5, pp. 2813–2820. https://doi.org/10.1016/j.matdes.2010.12.05410.1016/j.matdes.2010.12.054 ↗
74. Bakhsheshi-Rad, H., Abdul-Kadir, M., Idris, M., and Farahany, S., Relationship between the Corrosion Behavior and the Thermal Characteristics and Microstructure of Mg–0.5Ca–xZn Alloys, Corros. Sci., 2012, vol. 64, pp. 184–197. https://doi.org/10.1016/j.corsci.2012.07.01510.1016/j.corsci.2012.07.015 ↗
75. Zhen, Z., Xi, T.-F., and Zheng, Y.-F., A Review on In Vitro Corrosion Performance Test of Biodegradable Metallic Materials, Trans. Nonferrous Met. Soc. China, 2013, vol. 23, no. 8, pp. 2283–2293. https://doi.org/10.1016/S1003-6326(13)62730-210.1016/S1003-6326(13)62730-2 ↗
76. Gonzalez, J., Lamaka, S.V., Mei, D., Scharnagl, N., Feyerabend, F., Zheludkevich, M.L., and Willumeit-Römer, R., Mg Biodegradation Mechanism Deduced from the Local Surface Environment under Simulated Physiological Conditions, Adv. Healthcare Mater., 2021, vol. 10, no. 13, p. 2100053. https://doi.org/10.1002/adhm.20210005310.1002/adhm.202100053 ↗
77. Xin, Y., Hu, T., and Chu, P., In Vitro Studies of Biomedical Magnesium Alloys in a Simulated Physiological Environment: A Review, Acta Biomater., 2011, vol. 7, no. 4, pp. 1452–1459. https://doi.org/10.1016/j.actbio.2010.12.00410.1016/j.actbio.2010.12.004 ↗
78. Matsunaga, K., First-Principles Study of Substitutional Magnesium and Zinc in Hydroxyapatite and Octacalcium Phosphate, J. Chem. Phys., 2008, vol. 128, no. 24, p. 06B618. https://doi.org/10.1063/1.294033710.1063/1.2940337 ↗
79. Wang, J., Huang, S., Li, Y., Wei, Y., Xi, X., and Cai, K., Microstructure, Mechanical and Bio-Corrosion Properties of Mn-Doped Mg–Zn–Ca Bulk Metallic Glass Composites, Mater. Sci. Eng., C, 2013, vol. 33, no. 7, pp. 3832–3838. https://doi.org/10.1016/j.msec.2013.05.02010.1016/j.msec.2013.05.020 ↗