Effect of Cooling Rate on the Microstructure and Strength of Friction Stir Welded Joints in a High-Strength AA7075 Alloy
Source abstract
Abstract
Abstract The application of arc, plasma, laser, or electron beam welding methods to high-strength heat-treatable aluminum alloys, such as AA7075 belonging to a Al-Zn-Cu-Mg system, makes little sense because of the formation of weak heat-affected zones and hot cracks. Attempts were made to produce strong joints in these alloys using friction stir welding, which is a low heat input method. However, there are still problems with overaging and the formation of weak thermomechanically affected zones. In this research, we employ liquid flow cooling of the weld zone to eliminate overaging. It is found that the microhardness in the stir zone and the joint strength are maximum due to cooling at a medium liquid flow rate of ~4–6 l/min. All samples were subjected to artificial aging to eliminate weak thermomechanically affected zones, which further increased the microhardness and strength of joints. Structural studies reveal that the contribution from the dispersion strengthening mechanism under internal aging, which can be further enhanced by artificial aging, is maximum at medium cooling rates.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Mondolfo, L.F., Aluminum alloys: structure and properties, London-Boston, Butterworth, ISBN 978-0-408-70932-3, 1976
2. Liu, X., Wang, C., Li, X., Zhu, B. and Li, R., Investigation of 7075 aluminum alloy TIG welding joint using 7075 aluminum alloy wire before and after heat treatment. Materials Research Express, 2023, vol. 10, p. 046512, https://doi.org/10.1088/2053-1591/accac410.1088/2053-1591/accac4 ↗
3. Heidarzadeh, A., Mironov, S., Kaibyshev, R., Çam, G., Simar, A., Gerlich, A., Khodabakhshi, F., Mostafaei, A., Field, D.P., Robson, J.D., Deschamps, A., Withers, P.J., Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution, Progress in Materials Science, 2021, vol. 117, p. 100752, https://doi.org/10.1016/j.pmatsci.2020.10075210.1016/j.pmatsci.2020.100752 ↗
4. Kalashnikov, K.N., Tarasov, S.Y., Chumaevskii, A.V. et al. Towards aging in a multipass friction stir–processed АА2024, International Journal of Advanced Manufacturing Technology, 2019, vol. 103, pp. 2121–2132, https://doi.org/10.1007/s00170-019-03631-310.1007/s00170-019-03631-3 ↗
5. Mehri, A., Abdollah-zadeh, A., Entesari, S., Saeid, T., Wang, J.T., The effects of friction stir welding on microstructure and formability of 7075-T6 sheet, Results in Engineering, 2023, vol. 18, p. 101041, https://doi.org/10.1016/j.rineng.2023.10104110.1016/j.rineng.2023.101041 ↗
6. Wu, C., Wang, J., Wang, Q., Xia, P., Li, 7075 aluminum alloy Friction Stir Welding (FSW): Quality analysis and mechanical properties with WC-Co tool, Materials Today Communications, 2024, vol. 38, p. 108203, https://doi.org/10.1016/j.mtcomm.2024.10820310.1016/j.mtcomm.2024.108203 ↗
7. Su, J.-Q., Nelson, T.W., Mishra, R., Mahoney, M., Microstructural investigation of friction stir welded 7050-T651 aluminium, Acta Materialia, 2003, vol. 51(3), pp. 713-729, https://doi.org/10.1016/S1359-6454(02)00449-410.1016/S1359-6454(02)00449-4 ↗
8. Çetkin, E., Çelik, Y.H. & Temiz, Ş. Effect of welding parameters on microstructure and mechanical properties of AA7075/AA5182 alloys joined by TIG and MIG welding methods. Journal of Brazilian Society Mechanical Science and Engineering, 2020, vol. 42, p. 34, https://doi.org/10.1007/s40430-019-2119-710.1007/s40430-019-2119-7 ↗
9. El-Zathry, N.E., Akinlabi, S., Woo, W.L. et al. Friction Stir-Based Techniques: An Overview, Welding in the World, 2025, vol. 69, pp. 327–361, https://doi.org/10.1007/s40194-024-01847-w10.1007/s40194-024-01847-w ↗
10. Cui, L., Yang, X., Zhou, G., Xu, X., Shen, Z., Characteristics of defects and tensile behaviors on friction stir welded AA6061-T4 T-joints, Materials Science and Engineering A, 2012, vol. 543, pp. 58-68, https://doi.org/10.1016/j.msea.2012.02.04510.1016/j.msea.2012.02.045 ↗
11. Bansal, A., Singla, A.K., Dwivedi, V., Goyal, D.K., Singla, J., Gupta, M.K., Krolczyk, G.M., Influence of cryogenic treatment on mechanical performance of friction stir Al-Zn-Cu alloy weldments, Journal of Manufacturing Processes, 2020, vol. 56, pp. 43-53, https://doi.org/10.1016/j.jmapro.2020.04.06710.1016/j.jmapro.2020.04.067 ↗
12. Ahamed, S.A.A., Devaraju, A., Narasimha Rao, K.V., Effect of Cryogenic Coolant on Mechanical Properties and Micrographs of Solid State Welding of 2014 Al Plates. In: Pujari, S., Srikiran, S., Subramonian, S. (eds) Recent Advances in Material Sciences. Lecture Notes on Multidisciplinary Industrial Engineering, 2019, Springer, Singapore, https://doi.org/10.1007/978-981-13-7643-6_910.1007/978-981-13-7643-6_9 ↗
13. Fernandes, M.X., Sheikh-Ahmad, J., Ozturk, F., and Jarrar, F., Effect of Cold Air Jet Cooling on Weld Quality in Friction Stir Welding of AA2024-T351, Research & Development in Material Science, 2022, vol.16 (3), https://doi.org/10.31031/RDMS.2022.16.00089010.31031/RDMS.2022.16.000890 ↗
14. Dong, J., Zhang, D., Luo, X., Zhang, W., Zhang, W., Qiu, C., EBSD study of underwater friction stir welded AA7003-T4 and AA6060-T4 dissimilar joint, Journal of Materials Research and Technology, 2020, vol. 9(3), pp. 4309-4318, https://doi.org/10.1016/j.jmrt.2020.02.05610.1016/j.jmrt.2020.02.056 ↗
15. Abdollahzadeh, A, Bagheri, B, Abbasi, M, Sharifi, F, Mirsalehi, S.E., Moghaddam, A.O., A modified version of friction stir welding process of aluminum alloys: Analyzing the thermal treatment and wear behavior. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2021, vol. 235(10), pp. 2291-2309, https://doi.org/10.1177/1464420721102398710.1177/14644207211023987 ↗
16. Wang, Q., Zhao, Z., Zhao, Y., Yan, K., Liu, C., Zhang, H., The strengthening mechanism of spray forming Al-Zn-Mg-Cu alloy by underwater friction stir welding, Materials & Design, 2016, vol. 102, pp. 91-99, https://doi.org/10.1016/j.matdes.2016.04.03610.1016/j.matdes.2016.04.036 ↗
17. Kosturek, R., Sniezek, L., Torzewski, J., The Effect of Water Cooling on the Mechanical Properties of FSW Butt Joints Made of Aluminum Alloy AA7075-T651. Materials Science and Welding Technologies, 2025, vol. 68(1-4), pp. 327-361, https://doi.org/10.32730/mswt.2024.68.5.410.32730/mswt.2024.68.5.4 ↗
18. Ivanov, A., Chumaevskii, A., Amirov, A., Utyaganova, V., Savchenko, N., Rubtsov, V., & Tarasov, S., Features of Structure and Properties of Lap-Welded Joints of Aluminum Alloy Al–4Cu–1Mg with Titanium Alloy Ti–6Al–4V, Obtained by Friction Stir Welding. Metals, 2023, vol. 13(8), pp. 1385, https://doi.org/10.3390/met1308138510.3390/met13081385 ↗
19. Vijay, A., Radhika, N., A comprehensive review on underwater welding: Methods, property evaluations and challenges. Advanced Materials Processing Technology, 2024, vol. 10(2), pp. 923-959, https://doi.org/10.1080/2374068X.2023.218458210.1080/2374068X.2023.2184582 ↗
20. Christian, B.F., Mahoney, M.W., Calabrese, M., Micona, L., Evolution of microstructure and mechanical properties in naturally aged 7050 and 7075 Al friction stir welds, Materials Science and Engineering: A, 2010, vol. 527(9), pp.2233-2240, https://doi.org/10.1016/j.msea.2009.11.05710.1016/j.msea.2009.11.057 ↗
21. Sharma, C., Dwivedi, D.K., Kumar, P., Effect of post weld heat treatments on microstructure and mechanical properties of friction stir welded joints of Al-Zn-Mg alloy AA7039. Materials & Design, 2013, vol. 43, pp.134-143, https://doi.org/10.1016/j.matdes.2012.06.01810.1016/j.matdes.2012.06.018 ↗