Microstructure-Based Mechanical Models of Materials Manufactured by Laser Powder Bed Fusion Using Stainless Steel as an Example (Review)
Source abstract
Abstract
Abstract The paper reviews numerical models that explicitly consider structural features of additively manufactured austenitic stainless steel 316L on different scales. Experimental studies on hierarchical structures and the corresponding mechanical properties of the material are summarized. Key methods for generating two- and three-dimensional structures are discussed. Numerical studies on the features of plastic strain localization and stress concentration associated with interfaces of different nature, geometry, and scale in additively manufactured stainless steel 316L are overviewed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Engineering Technology and Methodologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. Kolubaev, E.A., Rubtsov, V.E., Chumaevsky, A.V., and Astafurova, E.G., Micro-, meso- and macrostructural design of bulk metallic and polymetallic materials by wire-feed electron-beam additive manufacturing, Physical Mesomechanics, 2022, vol. 25, no. 6, pp. 479–491. https://doi.org/10.1134/S102995992206001710.1134/S1029959922060017 ↗
2. Panin, A.V., Kazachenok, M.S., Krukovsky, K.V., Kazantseva, L.A., and Martynov, S.A., Comparative analysis of weld microstructure in Ti-6Al-4V samples produced by rolling and wire-feed electron beam additive manufacturing, Physical Mesomechanics, 2023, vol. 26, no. 6, pp. 643–655. https://doi.org/10.1134/S102995992306004810.1134/S1029959923060048 ↗
3. Jiang, Z., Sun, J., Berto, F., Wang, X., and Qian, G., Fatigue and fracture behavior of AlSi10Mg manufactured by selective laser melting: a review, Physical Mesomechanics, 2023, vol. 26, no. 4, pp. 367–390. https://doi.org/10.1134/S102995992304001X10.1134/S102995992304001X ↗
4. Panin, P.V., Lukina, E.A., Naprienko, S.A., and Alekseev, E.B., Effect of heat treatment on the structure and properties of titanium aluminide alloy Ti–Al–V–Nb–Cr–Gd produced by selective electron beam melting, Physical Mesomechanics, 2024, vol. 27, no. 2, pp. 163–174. https://doi.org/10.1134/S102995992402005X10.1134/S102995992402005X ↗
5. Rahmat, N., Kadkhodapour, J., and Arbabtafti, M., Mechanical characterization of additively manufactured orthopedic cellular implants: case study on different cell types and effect of defects, Physical Mesomechanics, 2023, vol. 26, no. 4, pp. 443–458. https://doi.org/10.1134/S102995992304006910.1134/S1029959923040069 ↗
6. Zykova, A.P., Nikolaeva, A.V., Vorontsov, A.V., Chumaevskii, A.V., Nikonov, S.Yu., Moskvichev, E.N., Gurianov, D.A., Savchenko, N.L., Kolubaev, E.A., and Tarasov, S.Yu., Effect of copper content on grain structure evolution in additively manufactured Ti-6Al-4V alloy, Physical Mesomechanics, 2023, vol. 26, no. 2, pp. 107–125. https://doi.org/10.1134/S102995992302001710.1134/S1029959923020017 ↗
7. Razorenov, S.V., Garkushin, G.V., Savinykh, A.S., and Klimova-Korsmik, O.G., Spall strength of 09CrNi2MoCu steel manufactured by hot rolling and direct laser deposition in the submicrosecond loading range, Physical Mesomechanics, 2023, vol. 26, no. 1, pp. 48–55. https://doi.org/10.1134/S102995992301006X10.1134/S102995992301006X ↗
8. Chaubey, S.K. and Gupta, K., A review on Wire-EDM of bio titanium, Reports in Mechanical Engineering, 2023, vol. 4, no. 1, pp. 141–152. https://doi.org/10.31181/rme040103092023c10.31181/rme040103092023c ↗
9. Liović, D., Franulović, M., Ferlič, L., and Gubeljak, N., Surface roughness of Ti6Al4V alloy produced by laser powder bed fusion, Facta Universitatis, Series: Mechanical Engineering, 2024, vol. 22, no. 1, pp. 63–76. https://doi.org/10.22190/FUME230719030L10.22190/FUME230719030L ↗
10. DebRoy, T., Wei, H.L., Zuback, J.S., Mukherjee, T., Elmer, J.W., Milewski, J.O., Beese, A.M., Wilson-Heid, A., De, A., and Zhang, W., Additive manufacturing of metallic components – process, structure and properties, Progress in Materials Science, 2018, vol. 92, pp. 112–224. https://doi.org/10.1016/j.pmatsci.2017.10.00110.1016/j.pmatsci.2017.10.001 ↗
11. Wang, Y.M., Voisin, T., McKeown, J.T., Ye, J., Calta, N.P., Li, Z., Zeng, Z., Zhang, Y., Chen, W., Roehling, T.T., Ott, R.T., Santala, M.K., Depond, Ph.J., Matthews, M.J., Hamza, A.V., and Zhu, T., Additively manufactured hierarchical stainless steels with high strength and ductility, Nature Materials, 2018, vol. 17, no. 1, pp. 63–71. https://doi.org/10.1038/nmat502110.1038/nmat5021 ↗
12. Gorsse, S., Hutchinson, C., Gouné, M., and Banerjee, R., Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys, Science and Technology of Advanced Materials, 2017, vol. 18, no. 1, pp. 584–610. https://doi.org/10.1080/14686996.2017.136130510.1080/14686996.2017.1361305 ↗
13. Peng, T. and Chen, C., Influence of energy density on energy demand and porosity of 316L stainless steel fabricated by selective laser melting, International Journal of Precision Engineering and Manufacturing-Green Technology, 2018, vol. 5, no. 1, pp. 55–62. https://doi.org/10.1007/s40684-018-0006-910.1007/s40684-018-0006-9 ↗
14. Scipioni Bertoli, U., Wolfer, A.J., Matthews, M.J., Delplanque, J.-P.R., and Schoenung, J.M., On the limitations of volumetric energy density as a design parameter for selective laser melting, Materials and Design, 2017, vol. 113, pp. 331–340. https://doi.org/10.1016/j.matdes.2016.10.03710.1016/j.matdes.2016.10.037 ↗
15. Song, Y., Sun, Q., Guo, K., Wang, X., Liu, J., and Sun, J., Effect of scanning strategies on the microstructure and mechanical behavior of 316L stainless steel fabricated by selective laser melting, Materials Science and Engineering A, 2020, vol. 793, p. 139879. https://doi.org/10.1016/j.msea.2020.13987910.1016/j.msea.2020.139879 ↗
16. Salman, O.O., Brenne, F., Niendorf, T., Eckert, J., Prashanth, K.G., He, T., and Scudino, S., Impact of the scanning strategy on the mechanical behavior of 316L steel synthesized by selective laser melting, Journal of Manufacturing Processes, 2019, vol. 45, pp. 255–261. https://doi.org/10.1016/j.jmapro.2019.07.01010.1016/j.jmapro.2019.07.010 ↗
17. Marattukalam, J.J., Karlsson, D., Pacheco, V., Beran, P., Wiklund, U., Jansson, U., Hjörvarsson, B., and Sahlberg, M., The effect of laser scanning strategies on texture, mechanical properties, and site-specific grain orientation in selective laser melted 316L SS, Materials and Design, 2020, vol. 193, p. 108852. https://doi.org/10.1016/j.matdes.2020.10885210.1016/j.matdes.2020.108852 ↗
18. Spierings, A.B., Herres, N., and Levy, G., Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts, Rapid Prototyping Journal, 2011, vol. 17, no. 3, pp. 195–202. https://doi.org/10.1108/1355254111112477010.1108/13552541111124770 ↗
19. Li, R., Shi, Y., Wang, Z., Wang, L., Liu, J., and Jiang, W., Densification behavior of gas and water atomized 316L stainless steel powder during selective laser melting, Applied Surface Science, 2010, vol. 256, no. 13, pp. 4350–4356. https://doi.org/10.1016/j.apsusc.2010.02.03010.1016/j.apsusc.2010.02.030 ↗
20. Wang, H., Lee, H.-W., Tran, M. T., and Kim, D.-K., Microstructure-based modeling of deformation and damage behavior of extruded and additively manufactured 316L stainless steels, Materials, 2024, vol. 17, no. 10, p. 2360. https://doi.org/10.3390/ma1710236010.3390/ma17102360 ↗
21. Kavousi, M., McGarry, P., McHugh, P., and Leen, S., Geometrical and crystal plasticity modelling: towards the establishment of a process-structure-property relationship for additively manufactured 316L struts, European Journal of Mechanics A/Solids, 2023, vol. 102, p. 105115. https://doi.org/10.1016/j.euromechsol.2023.10511510.1016/j.euromechsol.2023.105115 ↗
22. Ahmadi, A., Mirzaeifar, R., Moghaddam, N.S., Turabi, A.S., Karaca, H.E., and Elahinia, M., Effect of manufacturing parameters on mechanical properties of 316L stainless steel parts fabricated by selective laser melting: a computational framework, Materials and Design, 2016, vol. 112, pp. 328–338. https://doi.org/10.1016/j.matdes.2016.09.04310.1016/j.matdes.2016.09.043 ↗
23. Taheri Andani, M., Ghodrati, M., Karamooz-Ravari, M.R., Mirzaeifar, R., and Ni, J., Damage modeling of metallic alloys made by additive manufacturing, Materials Science and Engineering A, 2019, vol. 743, pp. 656–664. https://doi.org/10.1016/j.msea.2018.11.12510.1016/j.msea.2018.11.125 ↗
24. Charmi, A., Falkenberg, R., Ávila, L., Mohr, G., Sommer, K., Ulbricht, A., Sprengel, M., Saliwan Neumann, R., Skrotzki, B., and Evans, A., Mechanical anisotropy of additively manufactured stainless steel 316L: an experimental and numerical study, Materials Science and Engineering A, 2021, vol. 799, p. 140154. https://doi.org/10.1016/j.msea.2020.14015410.1016/j.msea.2020.140154 ↗
25. Lyu, X., Weber, F., Gebhardt, C., Chen, G., and Broeckmann, C., Crystal plasticity enhanced direct cyclic analysis of cyclic behaviour of LPBF-manufactured AISI 316L, Materials and Design, 2024, vol. 240, p. 112864. https://doi.org/10.1016/j.matdes.2024.11286410.1016/j.matdes.2024.112864 ↗
26. Ghodrati, M. and Mirzaeifar, R., Computational study of fatigue in sub-grain microstructure of additively manufactured alloys, Journal of Materials Engineering and Performance, 2020, vol. 29, no. 7, pp. 4631–4640. https://doi.org/10.1007/s11665-020-04935-210.1007/s11665-020-04935-2 ↗
27. Liang, X., Robert, C., Hor, A., and Morel, F., Numerical investigation of the surface and microstructure effects on the high cycle fatigue performance of additive manufactured stainless steel 316L, International Journal of Fatigue, 2021, vol. 149, p. 106273. https://doi.org/10.1016/j.ijfatigue.2021.10627310.1016/j.ijfatigue.2021.106273 ↗
28. Roters, F., Eisenlohr, P., Hantcherli, L., Tjahjanto, D.D., Bieler, T.R., and Raabe, D., Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: theory, experiments, applications, Acta Materialia, 2010, vol. 58, no. 4, pp. 1152–1211. https://doi.org/10.1016/j.actamat.2009.10.05810.1016/j.actamat.2009.10.058 ↗
29. Roters, F., Eisenlohr, P., Bieler, T.R., and Raabe, D., Crystal plasticity finite element methods, In Materials Science and Engineering, 1st ed., Wiley, 2010. https://doi.org/10.1002/978352763148310.1002/9783527631483 ↗
30. Trusov, P.V., Shveykin, A.I., Kondratyev, N.S., and Yants, A.Yu., Multilevel models in physical mesomechanics of metals and alloys: results and prospects, Physical Mesomechanics, 2021, vol. 24, no. 4, pp. 391–417. https://doi.org/10.1134/S102995992104005610.1134/S1029959921040056 ↗
31. Shveykin, A.I., Vshivkova, A.A., and Trusov, P.V., Methods of accounting for temperature and strain rate variation in multilevel constitutive models of metal deformation (analytical review), Physical Mesomechanics, 2024, vol. 27, no. 2, pp. 133–151. https://doi.org/10.1134/S102995992402003610.1134/S1029959924020036 ↗
32. Lewandowski, J.J. and Seifi, M., Metal additive manufacturing: a review of mechanical properties, Annual Review of Materials Research, 2016, vol. 46, no. 1, pp. 151–186. https://doi.org/10.1146/annurev-matsci-070115-03202410.1146/annurev-matsci-070115-032024 ↗
33. Seifi, M., Salem, A., Beuth, J., Harrysson, O., and Lewandowski, J.J., Overview of materials qualification needs for metal additive manufacturing, JOM, 2016, vol. 68, no. 3, pp. 747–764. https://doi.org/10.1007/s11837-015-1810-010.1007/s11837-015-1810-0 ↗
34. Bajaj, P., Hariharan, A., Kini, A., Kürnsteiner, P., Raabe, D., and Jägle, E.A., Steels in additive manufacturing: a review of their microstructure and properties, Materials Science and Engineering A, 2020, vol. 772, p. 138633. https://doi.org/10.1016/j.msea.2019.13863310.1016/j.msea.2019.138633 ↗
35. Li, N., Huang, S., Zhang, G., Qin, R., Liu, W., Xiong, H., Shi, G., and Blackburn, J., Progress in additive manufacturing on new materials: a review, Journal of Materials Science & Technology, 2019, vol. 35, no. 2, pp. 242–269. https://doi.org/10.1016/j.jmst.2018.09.00210.1016/j.jmst.2018.09.002 ↗
36. Byun, T.S., Gussev, M.N., and Lach, T.G., Deformation and fracture behavior of additively manufactured 316L stainless steel, JOM, 2024, vol. 76, no. 1, pp. 362–378. https://doi.org/10.1007/s11837-023-06224-410.1007/s11837-023-06224-4 ↗
37. Zhou, B., Xu, P., Li, W., Liang, Y., and Liang, Y., Microstructure and anisotropy of the mechanical properties of 316L stainless steel fabricated by selective laser melting, Metals, 2021, vol. 11, no. 5, p. 775. https://doi.org/10.3390/met1105077510.3390/met11050775 ↗
38. Andreau, O., Koutiri, I., Peyre, P., Penot, J.-D., Saintier, N., Pessard, E., De Terris, T., Dupuy, C., and Baudin, T., Texture control of 316L parts by modulation of the melt pool morphology in selective laser melting, Journal of Materials Processing Technology, 2019, vol. 264, pp. 21–31. https://doi.org/10.1016/j.jmatprotec.2018.08.04910.1016/j.jmatprotec.2018.08.049 ↗
39. Antony, K., Arivazhagan, N., and Senthilkumaran, K., Numerical and experimental investigations on laser melting of stainless steel 316L metal powders, Journal of Manufacturing Processes, 2014, vol. 16, no. 3, pp. 345–355. https://doi.org/10.1016/j.jmapro.2014.04.00110.1016/j.jmapro.2014.04.001 ↗
40. Tang, M., Pistorius, P.C., and Beuth, J.L., Prediction of lack-of-fusion porosity for powder bed fusion, Additive Manufacturing, 2017, vol. 14, pp. 39–48. https://doi.org/10.1016/j.addma.2016.12.00110.1016/j.addma.2016.12.001 ↗
41. Tiller, W.A., Preferred growth direction of metals, JOM, 1957, vol. 9, pp. 847–855. https://doi.org/10.1007/BF0339792810.1007/BF03397928 ↗
42. Sofinowski, K.A., Raman, S., Wang, X., Gaskey, B., and Seita, M., Layer-wise engineering of grain orientation (LEGO) in laser powder bed fusion of stainless steel 316L, Additive Manufacturing, 2021, vol. 38, p. 101809. https://doi.org/10.1016/j.addma.2020.10180910.1016/j.addma.2020.101809 ↗
43. Sun, Z., Tan, X., Tor, S.B., and Chua, C.K., Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting, NPG Asia Materials, 2018, vol. 10, no. 4, pp. 127–136. https://doi.org/10.1038/s41427-018-0018-510.1038/s41427-018-0018-5 ↗
44. Suryawanshi, J., Prashanth, K.G., and Ramamurty, U., Mechanical behavior of selective laser melted 316L stainless steel, Materials Science and Engineering A, 2017, vol. 696, pp. 113–121. https://doi.org/10.1016/j.msea.2017.04.05810.1016/j.msea.2017.04.058 ↗
45. Kong, D., Dong, C., Wei, S., Ni, X., Zhang, L., Li, R., Wang, L., Man, C., and Li, X., About metastable cellular structure in additively manufactured austenitic stainless steels, Additive Manufacturing, 2021, vol. 38, p. 101804. https://doi.org/10.1016/j.addma.2020.10180410.1016/j.addma.2020.101804 ↗
46. Bertsch, K.M., Meric De Bellefon, G., Kuehl, B., and Thoma, D.J., Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L, Acta Materialia, 2020, vol. 199, pp. 19–33. https://doi.org/10.1016/j.actamat.2020.07.06310.1016/j.actamat.2020.07.063 ↗
47. Sudmanns, M., Birnbaum, A.J., Gu, Y., Iliopoulos, A.P., Callahan, P.G., Michopoulos, J.G., and El-Awady, J.A., The interplay of local chemistry and plasticity in controlling microstructure formation during laser powder bed fusion of metals, Additive Manufacturing, 2022, vol. 55, p. 102791. https://doi.org/10.1016/j.addma.2022.10279110.1016/j.addma.2022.102791 ↗
48. Hong, Y., Zhou, C., Zheng, Y., Zhang, L., and Zheng, J., The cellular boundary with high density of dislocations governed the strengthening mechanism in selective laser melted 316L stainless steel, Materials Science and Engineering A, 2021, vol. 799, p. 140279. https://doi.org/10.1016/j.msea.2020.14027910.1016/j.msea.2020.140279 ↗
49. Pham, M.-S., Dovgyy, B., Hooper, P.A., Gourlay, C.M., and Piglione, A., The role of side-branching in microstructure development in laser powder-bed fusion, Nature Communications, 2020, vol. 11, no. 1, p. 749. https://doi.org/10.1038/s41467-020-14453-310.1038/s41467-020-14453-3 ↗
50. Biswas, P. and Ma, J., Development of crystallographic misorientation in laser powder bed fusion 316L stainless steel, Additive Manufacturing, 2024, vol. 80, p. 103951. https://doi.org/10.1016/j.addma.2023.10395110.1016/j.addma.2023.103951 ↗
51. Rukwied, A., Ruff, A.W., and Willard, W.A., Study of the cellular solidification structure in a continuously cast high purity copper, Metallurgical Transactions, 1971, vol. 2, no. 8, pp. 2105–2114. https://doi.org/10.1007/BF0291753810.1007/BF02917538 ↗
52. Shamsujjoha, Md., Agnew, S.R., Fitz-Gerald, J.M., Moore, W.R., and Newman, T.A., High strength and ductility of additively manufactured 316L stainless steel explained, Metallurgical and Materials Transactions A, 2018, vol. 49, no. 7, pp. 3011–3027. https://doi.org/10.1007/s11661-018-4607-210.1007/s11661-018-4607-2 ↗
53. Kong, D., Dong, C., Ni, X., Liang, Z., Man, C., and Li, X., Hetero-deformation-induced stress in additively manufactured 316L stainless steel, Materials Research Letters, 2020, vol. 8, no. 10, pp. 390–397. https://doi.org/10.1080/21663831.2020.177514910.1080/21663831.2020.1775149 ↗
54. Zhong, Y., Liu, L., Wikman, S., Cui, D., and Shen, Z., Intragranular cellular segregation network structure strengthening 316L stainless steel prepared by selective laser melting, Journal of Nuclear Materials, 2016, vol. 470, pp. 170– 178. https://doi.org/10.1016/j.jnucmat.2015.12.03410.1016/j.jnucmat.2015.12.034 ↗
55. Bahl, S., Mishra, S., Yazar, K.U., Kola, I.R., Chatterjee, K., and Suwas, S., Non-equilibrium microstructure, crystallographic texture and morphological texture synergistically result in unusual mechanical properties of 3D printed 316L stainless steel, Additive Manufacturing, 2019, vol. 28, pp. 65–77. https://doi.org/10.1016/j.addma.2019.04.01610.1016/j.addma.2019.04.016 ↗
56. Liu, L., Ding, Q., Zhong, Y., Zou, J., Wu, J., Chiu, Y.-L., Li, J., Zhang, Z., Yu, Q., and Shen, Z., Dislocation network in additive manufactured steel breaks strength–ductility trade-off, Materials Today, 2018, vol. 21, no. 4, pp. 354– 361. https://doi.org/10.1016/j.mattod.2017.11.00410.1016/j.mattod.2017.11.004 ↗
57. Salman, O.O., Gammer, C., Chaubey, A.K., Eckert, J., and Scudino, S., Effect of heat treatment on microstructure and mechanical properties of 316L steel synthesized by selective laser melting, Materials Science and Engineering A, 2019, vol. 748, pp. 205–212. https://doi.org/10.1016/j.msea.2019.01.11010.1016/j.msea.2019.01.110 ↗
58. Kaya, A.C., Salamci, M.U., and Fleck, C., Influence of anisotropy on the deformation behaviour in microtensile 316L steel specimens fabricated by laser powder bed fusion (PBF-LB/M), Materials Science and Engineering A, 2023, vol. 863, p. 144521. https://doi.org/10.1016/j.msea.2022.14452110.1016/j.msea.2022.144521 ↗
59. Dixit, S., Liu, S., Murdoch, H.A., and Smith, P.M., Investigating build orientation-induced mechanical anisotropy in additive manufacturing 316L stainless steel, Materials Science and Engineering A, 2023, vol. 880, p. 145308. https://doi.org/10.1016/j.msea.2023.14530810.1016/j.msea.2023.145308 ↗
60. Wang, H., Jiang, P., Yang, G., and Yan, Y., An investigation of the anisotropic mechanical properties of additive-manufactured 316L SS with SLM, Materials, 2024, vol. 17, no. 9, p. 2017. https://doi.org/10.3390/ma1709201710.3390/ma17092017 ↗
61. Im, Y.-D., Kim, K.-H., Jung, K.-H., Lee, Y.-K., and Song, K.-H., Anisotropic mechanical behavior of additive manufactured AISI 316L steel, Metallurgical and Materials Transactions A, 2019, vol. 50, no. 4, pp. 2014–2021. https://doi.org/10.1007/s11661-019-05139-710.1007/s11661-019-05139-7 ↗
62. Qu, H., Li, J., Zhang, F., and Bai, J., Anisotropic cellular structure and texture microstructure of 316L stainless steel fabricated by selective laser melting via rotation scanning strategy, Materials and Design, 2022, vol. 215, p. 110454. https://doi.org/10.1016/j.matdes.2022.11045410.1016/j.matdes.2022.110454 ↗
63. Dryepondt, S., Nandwana, P., Fernandez-Zelaia, P., and List, F., Microstructure and high temperature tensile properties of 316L fabricated by laser powder-bed fusion, Additive Manufacturing, 2021, vol. 37, p. 101723. https://doi.org/10.1016/j.addma.2020.10172310.1016/j.addma.2020.101723 ↗
64. Ronneberg, T., Davies, C.M., and Hooper, P.A., Revealing relationships between porosity, microstructure and mechanical properties of laser powder bed fusion 316L stainless steel through heat treatment, Materials and Design, 2020, vol. 189, p. 108481. https://doi.org/10.1016/j.matdes.2020.10848110.1016/j.matdes.2020.108481 ↗
65. Hu, D., Guo, Z., Grilli, N., Tay, A., Lu, Z., and Yan, W., Understanding the strain localization in additively manufactured materials: micro-scale tensile tests and crystal plasticity modeling, International Journal of Plasticity, 2024, vol. 177, p. 103981. https://doi.org/10.1016/j.ijplas.2024.10398110.1016/j.ijplas.2024.103981 ↗
66. Yang, Y., Bai, Y., Wang, Y., Zhang, Y., Weng, C., Lu, W.F., and Wang, H., Compressive mechanical response and microstructures in low strain rate plastic deformation of stainless steel 316L fabricated by selective laser melting, Journal of Materials Research and Technology, 2024, vol. 29, pp. 4327–4344. https://doi.org/10.1016/j.jmrt.2024.02.12310.1016/j.jmrt.2024.02.123 ↗
67. Taheri Andani, M., Karamooz-Ravari, M.R., Mirzaeifar, R., and Ni, J., Micromechanics modeling of metallic alloys 3D printed by selective laser melting, Materials and Design, 2018, vol. 137, pp. 204–213. https://doi.org/10.1016/j.matdes.2017.10.02610.1016/j.matdes.2017.10.026 ↗
68. Romanova, V., Pisarev, M., Emelianova, E., and Balokhonov, R., Mesoscale deformation-induced surface roughening in additively manufactured stainless steel, In AIP Conference Proceedings, 2025, 3177, 020005. https://doi.org/10.1063/5.029481810.1063/5.0294818 ↗
69. Yan, W., Lian, Y., Yu, C., Kafka, O.L., Liu, Z., Liu, W.K., and Wagner, G.J., An integrated process–structure–property modeling framework for additive manufacturing, Computer Methods in Applied Mechanics and Engineering, 2018, vol. 339, pp. 184–204. https://doi.org/10.1016/j.cma.2018.05.00410.1016/j.cma.2018.05.004 ↗
70. Köhnen, P., Létang, M., Voshage, M., Schleifenbaum, J.H., and Haase, C., Understanding the process-microstructure correlations for tailoring the mechanical properties of L-PBF produced austenitic advanced high strength steel, Additive Manufacturing, 2019, vol. 30, p. 100914. https://doi.org/10.1016/j.addma.2019.10091410.1016/j.addma.2019.100914 ↗
71. Zinovieva, O., Zinoviev, A., Ploshikhin, V., Romanova, V., and Balokhonov, R., Strategy of computational predictions for mechanical behaviour of additively manufactured materials, Materials Science and Technology, 2018, vol. 34, no. 13, pp. 1591–1605. https://doi.org/10.1080/02670836.2018.148993910.1080/02670836.2018.1489939 ↗
72. Chen, Y., Wang, Y., Lu, Y., Han, B., Huang, K., Fang, X., and Zhang, Q., A multiscale model for efficiently simulating laser powder bed fusion process with detailed microstructure and mechanical performance results, Materials Science and Engineering A, 2024, vol. 918, p. 147435. https://doi.org/10.1016/j.msea.2024.14743510.1016/j.msea.2024.147435 ↗
73. Kuna, L., Birnbaum, A.J., and Teferra, K., A framework for predicting residual mechanical response fields for laser powder bed fusion at the polycrystalline length scale, Additive Manufacturing, 2023, vol. 78, p. 103830. https://doi.org/10.1016/j.addma.2023.10383010.1016/j.addma.2023.103830 ↗
74. Romanova, V., Mohebbi, M.S., Dymnich, E., Balokhonov, R., and Ploshikhin, V., A physically-based computational approach for processing-microstructure-property linkage of materials additively manufactured by laser powder bed fusion, The International Journal of Mechanical Sciences, 2022, vol. 219, p. 107103. https://doi.org/10.1016/j.ijmecsci.2022.10710310.1016/j.ijmecsci.2022.107103 ↗
75. Zinovieva, O., Romanova, V., and Balokhonov, R., Effects of scanning pattern on the grain structure and elastic properties of additively manufactured 316L austenitic stainless steel, Materials Science and Engineering A, 2022, vol. 832, p. 142447. https://doi.org/10.1016/j.msea.2021.14244710.1016/j.msea.2021.142447 ↗
76. Kavousi, M., McGarry, P., McHugh, P., and Leen, S., Cellular automata and crystal plasticity modelling for metal additive manufacturing, Materials Research Proceedings, 2024, vol. 41, pp. 2429–2436. https://doi.org/10.21741/9781644903131-26710.21741/9781644903131-267 ↗
77. Zinovieva, O., Romanova, V., Zinoviev, A., Nekhorosheva, O., and Balokhonov, R., Elastic properties of additively manufactured steel produced with different scan strategies, The International Journal of Mechanical Sciences, 2023, vol. 244, p. 108089. https://doi.org/10.1016/j.ijmecsci.2022.10808910.1016/j.ijmecsci.2022.108089 ↗
78. Voigt, W., Lehrbuch der Kristallphysik. Vieweg+Teubner Verlag, Wiesbaden, 1966.10.1007/978-3-663-15884-4 ↗
79. Reuss, A., Berechnung der fließgrenze von mischkristallen auf grund der plastizitätsbedingung für einkristalle, Journal of Applied Mathematics and Mechanics, 1929, vol. 9, no. 1, pp. 49–58. https://doi.org/10.1002/zamm.1929009010410.1002/zamm.19290090104 ↗
80. Hill, R., The elastic behaviour of a crystalline aggregate, Proceedings of the Physical Society. Section A, 1952, vol. 65, no. 5, pp. 349–354. https://doi.org/10.1088/0370-1298/65/5/30710.1088/0370-1298/65/5/307 ↗