Mechanical Behavior of Differently Oriented (CoCrFeNi)94Ti2Al4 Single Crystals
Source abstract
Abstract
The paper analyzes the mechanical behavior and plastic deformation mechanisms (slip, twinning) in single-crystalline high-entropy fcc alloy (CoCrFeNi)94Ti2Al4 (at %) in relation to the crystal orientation ( $$[\bar 144]$$ , [001]), type of deformation (tension, compression), and heat treatment (quenching, aging at 923 K for 4 h). The analysis shows that after aging at 923 K for 4 h, compared to quenching, the critical shear stress of such crystals increases by 20–30 MPa at 77–973 K due precipitated γ′-phase particles of size 3–5 nm. The onset of their plastic flow, irrespective of the heat treatment, is associated with slip such that their critical shear stress depends neither on the crystal orientation nor on the type of deformation (tension, compression) at 77–973 K. When deformed at 77–973 K after quenching or aging, the $$[\bar 144]$$ and [001] crystals reveal a planar structure with dislocation pileups. In the quenched and aged $$[\bar 144]$$ crystals, twinning occurs after previous tensile slip deformation to 40% at 77 K. The stages of flow curves, the strain hardening coefficient, and the plasticity of the crystals are found to depend on their orientation, test temperature, and heat treatment. The dependences of the strain hardening coefficient of the crystals on their orientation and temperature in tension are discussed. A method is proposed for attaining a high yield strength in single-crystalline high-entropy (CoCrFeNi)94Ti2Al4 under tension at above 296 K.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Wu, Z., Bei, H., Pharr, G.M., and George, E.P., Temperature Dependence of the Mechanical Properties of Equiatomic Solid Solution Alloys with Face-Centered Cubic Crystal Structures, Acta Mater., 2014, vol. 81, pp. 428–441. https://doi.org/10.1016/j.actamat.2014.08.02610.1016/j.actamat.2014.08.026 ↗
2. Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E.H., George, E.P., and Ritchie, R.O., A Fracture-Resistant High-Entropy Alloy for Cryogenic Applications, Science, 2014, vol. 345(6201), pp. 1153–1158. https://doi.org/10.1126/science.125458110.1126/science.1254581 ↗
3. Otto, F., Dlouhy, A., Somsen, Ch., Bei, H., Eggeler, G., and George, E.P., The Influences of Temperature and Microstructure on the Tensile Properties of a CoCrFeMnNi High-Entropy Alloy, Acta Mater., 2013, vol. 61, no. 15, pp. 5743–5755. https://doi.org/10.1016/j.actamat.2013.06.01810.1016/j.actamat.2013.06.018 ↗
4. Kireeva, I.V., Chumlyakov, Yu.I., Pobedennaya, Z.V., Vyrodova, A.V., Kuksgauzen, I.V., and Kuksgauzen, D.A., Orientation and Temperature Dependence of a Planar Slip and Twinning in Single Crystals of Al0.3CoCrFeNi High-Entropy Alloy, Mater. Sci. Eng. A, 2018, vol. 737, pp. 47–60. https://doi.org/10.1016/j.msea.2018.09.02510.1016/j.msea.2018.09.025 ↗
5. Kireeva, I.V., Chumlyakov, Yu.I., Vyrodova, A.V., Pobedennaya, Z.V., and Karaman, I., Effect of Twinning on the Orientation Dependence of Mechanical Behaviour and Fracture in Single Crystals of the Equiatomic CoCrFeMnNi High-Entropy Alloy at 77 K, Mater. Sci. Eng. A, 2020, vol. 784, pp. 139315(1–14). https://doi.org/10.1016/j.msea.2020.13931510.1016/j.msea.2020.139315 ↗
6. Astafurova, E.G., Reunova, K.A., Melnikov, E.V., Panchenko, M.Yu., Astafurov, S.V., Maier, G.G., and Moskvina, V.A., On the Difference in Carbon- and Nitrogen-Alloying of Equiatomic FeMnCrNiCo High-Entropy Alloy, Mater. Lett., 2020, vol. 276, p. 128183. https://doi.org/10.1016/j.matlet.2020.12818310.1016/j.matlet.2020.128183 ↗
7. Kireeva, I.V., Chumlyakov, Yu.I., and Pobedennaya, Z.V., Solid-Solution Hardening with Nitrogen of CoCrFeMnNi High-Entropy Alloy Single Crystals, AIP Conf. Proc., 2020, vol. 2310, pp. 020147(1–4). https://doi.org/10.1063/5.003426310.1063/5.0034263 ↗
8. He, J.Y., Wang, H., Huang, H.L., Xu, X.D., Chen, M.W., Wu, Y., Liu, X.J., Nieh, T.G., An, K., and Lu, Z.P., A Precipitation-Hardened High-Entropy Alloy with Outstanding Tensile Properties, Acta Mater., 2016, vol. 102, pp. 187–196. https://doi.org/10.1016/actamat.2015.08.07610.1016/actamat.2015.08.076 ↗
9. Zhao, Y.Y., Chen, H.W., Lu, Z.P., and Nieh, T.G., Thermal Stability and Coarsening of Coherent Particles in a Precipitation-Hardened (NiCoFeCr)94Ti2Al4 High-Entropy Alloy, Acta Mater., 2018, vol. 147, pp. 184–194. https://doi.org/10.1016/actamat.2018.01.04910.1016/actamat.2018.01.049 ↗
10. Kireeva, I.V., Chumlyakov, Yu.I., Pobedennaya, Z.V., and Vyrodova, A.V., Effect of γ′-Phase Particles on the Orientation and Temperature Dependence of the Mechanical Behaviour of Al0.3CoCrFeNi High Entropy Alloy Single Crystals, Mater. Sci. Eng. A, 2020, vol. 772, pp. 138772(1–9). https://doi.org/10.1016/j.msea.2019.13877210.1016/j.msea.2019.138772 ↗
11. Okamoto, N.L., Fujimoto, S., Kambara, Y., Kawamura, M, Chen, Z.M.T., Matsunoshita, H., Tanaka, K., Inui, H., and George, E.P., Size Effect, Critical Resolved Shear Stress, Stacking Fault Energy, and Solid Solution Strengthening in the CrMnFeCoNi High-Entropy Alloy, Sci. Rep., 2016, vol. 10, pp. 6.35863(1–4). https://doi.org/10.1038/srep3586310.1038/srep35863 ↗
12. Yasuda, H.Y., Shigeno, K., and Nagase, T., Dynamic Strain Aging of Al0.3CoCrFeNi High Entropy Alloy Single Crystals, Scripta Mater., 2015, vol. 108, pp. 80–83. https://doi.org/10.1016/j.scriptamat.2015.06.02210.1016/j.scriptamat.2015.06.022 ↗
13. Kireeva, I.V., Chumlyakov, Yu.I., Pobedennaya, Z.V., Vyrodova, A.V., and Saraeva, A.A., High-Strength Behavior of the Al0.3CoCrFeNi High-Entropy Alloy Single Crystals, Metals, 2020, vol. 10, pp. 1149(1–11). https://doi.org/10.3390/met1009114910.3390/met10091149 ↗
14. Chowdhury, P., Canadinc, D., and Sehitoglu, H., On Deformation Behavior of Fe–Mn Based Structural Alloys, Mater. Sci. Eng. R, 2017, vol. 122, pp. 1–28. https://doi.org/10.1016/j.mser.2017.09.00210.1016/j.mser.2017.09.002 ↗
15. Bönisch, M., Wu, Y., and Sehitoglu, H., Hardening by Slip-Twin and Twin-Twin Interactions in FeMnNiCoCr, Acta Mater., 2018, vol. 153, pp. 391–403. https://doi.org/10.1016/j.actamat.2018.04.05410.1016/j.actamat.2018.04.054 ↗
16. Abuzaid, W. and Sehitoglu, H., Critical Resolved Shear Stress for Slip and Twin Nucleation in Single Crystalline FeNiCoCrMn High Entropy Alloy, Mater. Charact., 2017, vol. 129, pp. 288–299. https://doi.org/10.1016/j.matchar.2017.05.01410.1016/j.matchar.2017.05.014 ↗
17. Gwalani, B., Soni, V., Lee, M., Mantri, S.A., Ren, Y., and Banerjee, R., Optimizing the Coupled Effects of Hall–Petch and Precipitation Strengthening in an Al0.3CoCrFeNi High Entropy Alloy, Mater. Des., 2017, vol. 121, pp. 254–260. https://doi.org/10.1016/j.matdes.2017.02.07210.1016/j.matdes.2017.02.072 ↗
18. Nembach, E., Particle Strengthening of Metals and Alloys, New York: John Wiley & Sons, Inc., 1997.
19. Laplanche, G., Gadaud, P., Horst, O., Otto, F., Eggeler, G., and George, E.P., Temperature Dependencies of the Elastic Moduli and Thermal Expansion Coefficient of an Equiatomic Single-Phase CoCrFeMnNi High-Entropy Alloy, J. Alloy. Compd., 2015, vol. 623, pp. 348–353. https://doi.org/10.1016/j.jallcom.2014.11.06110.1016/j.jallcom.2014.11.061 ↗
20. Berner, R. and Kronmüller, H., Plastische Verformung von Einkristallen, Moderne Probleme der Metallphysik, vol. 1, A. Seeger, Ed., Berlin: Springer-Verlag, 1965.10.1007/978-3-642-87529-8_2 ↗
21. Gerold, V. and Karnthaler, H.P., On the Origin of Planar Slip in F.C.C. Alloys, Acta Metall., 1989, vol. 37, no. 8, pp. 2177–2183.10.1016/0001-6160(89)90143-0 ↗
22. Panin, V.E., Dudarev, E.F., and Bushnev, L.S., Structure and Mechanical Properties of Substitutional Solid Solutions, Moscow: Metallurgia, 1971.