Effect of local curvature of the coating-substrate interface on deformation and fracture of ceramic coatings under uniaxial tension
Source abstract
Abstract
Scanning electron microscopy and atomic force microscopy have been applied to study the fracture of SiAlN coatings on Cu substrates under uniaxial tension. It is shown that coating spalling occurs in the zones of local curvature of the SiAlN-Cu interface which form due to dislocation glide in the substrate. Preliminary ion bombardment of the substrate suppresses dislocation-induced kinking at the coating-substrate interface and increases the adhesive strength of the coatings, thus preventing their edge delamination. At the same time, the wavy coatingsubstrate interface resulting from ion bombardment gives rise to normal stresses that lead to the buckling and spalling of the coatings in the zones of positive local curvature of the interface.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Numerical methods in engineering · Material Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Hutchinson, J.W., Delamination of Compressed Films on Curved Substrates, J. Mech. Phys. Solids, 2001, vol. 49, pp. 1847–1864.10.1016/S0022-5096(01)00029-1 ↗
2. Clarke, D.R. and Pompe, W., Critical Radius for Interface Separation of a Compressively Stressed Film from a Rough Surface, Acta Mater., 1999, vol. 47, no. 6, pp.1749–1756.10.1016/S1359-6454(99)00078-6 ↗
3. Faulhaber, S., Mercer, C., Moon, M.-W., Hutchinson, J.W., and Evans, A.G., Buckling Delamination in Compressed Multilayers on Curved Substrates with Accompanying Ridge Cracks, J. Mech. Phys. Solids, 2006, vol. 54, pp. 1004–1028.10.1016/j.jmps.2005.11.005 ↗
4. Liu, D., Seraffon, M., Flewitt, P.E.J., Simms, N.J., Nicholls, J.R., and Rickerby, D.S., Effect of Substrate Curvature on Residual Stresses and Failure Modes of an Air Plasma Sprayed Thermal Barrier Coating System, J. Eur. Ceram. Soc, 2013, vol. 33, pp. 3345–3357.10.1016/j.jeurceramsoc.2013.05.018 ↗
5. Rogers, J.A., Someya, T., and Huang, Y., Materials and Mechanics for Stretchable Electronics, Science, 2010, vol. 327, pp. 1603–1607.10.1126/science.1182383 ↗
6. Panin, A.V., Shugurov, A.R., Kazachenok, M.S., and Sergeev, V.P., Effect of the Nanostructuring of a Cu Substrate on the Fracture of Heat-Resistant Si-Al-N Coatings during Uniaxial Tension, Tech. Phys. J. Appl. Phys., 2012, vol. 15, no. 6, pp. 779–786.
7. Zhou, Y.C., Tonomori, T., Yoshida, A., Liu, L., Bignall, G., and Hashida, T., Fracture Characteristics of Thermal Barrier Coatings after Tensile and Bending Tests, Surf. Coat. Tech., 2002, vol. 157, pp. 118–127.10.1016/S0257-8972(02)00154-8 ↗
8. Wang, J., Hoagland, R.G., Liu, X.Y., and Misra, A., The Influence of Interface Shear Strength on the Glide Dislocation-Interface Interactions, Acta Mater., 2011, vol. 59, pp.3164–3173.10.1016/j.actamat.2011.01.056 ↗
9. Ruffini, A., Durinck, J., Colin, J., Coupeau, C., and Grilhe, J., Interface Step-Induced Thin-Film Delamination and Buckling, Acta Mater., 2013, vol. 61, pp. 4429–4438.10.1016/j.actamat.2013.04.012 ↗
10. Freund, L.B. and Suresh, S., Thin Film Materials: Stress, Defect Formation and Surface Evolution, Cambridge: Cambridge University Press, 2003.
11. Yu, H.H., He, M.Y., and Hutchinson, J.W., Edge Effects in Thin Film Delamination, Acta Mater., 2001, vol. 49, pp. 93–107.10.1016/S1359-6454(00)00293-7 ↗
12. Balint, D.S. and Hutchinson, J.W., Mode II Edge Delamination of Compressed Thin Films, J. Appl. Mech., 2001, vol. 68, pp. 725–730.10.1115/1.1388012 ↗
13. Jia, Z., Peng, C., Lou, J., and Li, T., A Map of Competing Buckling-Driven Failure Modes of Substrate-Supported Thin Brittle Films, Thin Solid Films, 2012, vol. S20, pp. 6S76–6S80.
14. Hutchinson, J.W. and Suo, Z., Mixed Mode Cracking in Layered Materials, Adv. Appl. Mech., 1991, vol. 29, pp. 63–191.10.1016/S0065-2156(08)70164-9 ↗
15. d’Heurle, F.M., Aluminum Films Deposited by RF Sputtering, Metall. Trans., 1970, vol. 1, iss. 3, pp. 725–732.10.1007/BF02811600 ↗
16. Gong, X.-Y. and Clarke, D.R., On the Measurement of Strain in Coatings Formed on a Wrinkled Elastic Substrate, Oxid. Met, 1998, vol. S0, no. S-6, pp. 355–376.10.1023/A:1018848607100 ↗
17. Shugurov, A.R. and Panin, A.V., Mechanisms of Periodic Deformation of the Film-Substrate System under Com-pressive Stress, Phys. Mesomech., 2010, vol. 13, no. 1–2, pp. 79–87.10.1016/j.physme.2010.03.010 ↗
18. Hutchinson, J.W., He, M.Y., and Evans, A.G., The Influence of Imperfections on the Nucleation and Propagation of Buckling Driven Delaminations, J. Mech. Phys. Solids, 2000, vol. 48, pp. 709–734.10.1016/S0022-5096(99)00050-2 ↗
19. Merle, B. and Goken, M., Fracture Toughness of Silicon Nitride Thin Films of Different Thicknesses as Measured by Bulge Tests, Acta Mater., 2011, vol. 59, pp. 1772–1779.10.1016/j.actamat.2010.11.043 ↗
20. Kataria, S., Srivastava, S.K., Kumar, P., Srinivas, G., Si ju, Khan, J., Sridhar Rao, D.V., and Barshilla, H.C., Nanocrystalline TiN Coatings with Improved Toughness Deposited by Pulsing the Nitrogen Flow Rate, Surf. Coat. Tech., 2012, vol. 206, pp. 4279–4286.10.1016/j.surfcoat.2012.04.040 ↗
21. Shugurov, A.R., Akulinkin, A.A., Panin, A.V., Sergeev, V.P., Kalashnikov, M.P., Voronov, A.V., and Cheng, C.-H., Study of Crack Resistance of TiAlN Coatings by Scratch Testing, Phys. Mesomech., 2017, vol. 20, no. 2, pp. 185–192.10.1134/S1029959917020084 ↗