Modeling the Response of Additively Manufactured Heterogeneous Metal-Ceramic Specimens to Dynamic Impact
Source abstract
Abstract
Abstract The paper reports on experiments and numerical simulation of high-speed impact loading of additively manufactured heterogeneous specimens. It is shown that the proposed model of direct numerical simulation of a heterogeneous material based on random distribution of given materials over difference cells accurately reproduces the processes of deformation, fracture, and cratering under impact loading. A series of calculations are made to determine the ballistic efficiency of additively manufactured heterogeneous metal-ceramic specimens using the DoP (depth-of-penetration) method. A procedure is proposed for estimating the efficiency of heterogeneous metal-ceramic specimens, revealing local maxima in it.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Ruktuev, A.A., Lazurenko, D.V., Kolubaev, E.A., Ogneva, T.S., and Malyutina, Yu.N., Additive Manufacturing Technologies, Novosibirsk: NSTU, 2023.
2. Fomin, V.M., Golyshev, A.A., Kosarev, V.F., Malikov, A.G., Orishich, A.M., and Filippov, A.A., Deposition of Cermet Coatings on the Basis of Ti, Ni, WC, and B4C by Cold Gas Dynamic Spraying with Subsequent Laser Irradiation, Phys. Mesomech., 2020, vol. 23, no. 4, pp. 291–300. https://doi.org/10.1134/S102995992004002510.1134/S1029959920040025 ↗
3. Mendagaliev, R.V., Shalnova, S.A., Gushchina, M.O., Zemlyakov, E.V., Turichin, G.A., and Klimova-Korsmik, O.G., Features of Production of Dissimilar Graded Materials Using Additive Manufacturing Methods, Uproch. Tekhn. Pokr., 2024, vol. 20, no. 1, pp. 41–45. https://doi.org/10.36652/1813-1336-2024-20-1-41-4510.36652/1813-1336-2024-20-1-41-45 ↗
4. Additive Manufacturing for the Aerospace Industry, Froes, F. and Boyer, R., Eds., Elsevier, 2019. https://doi.org/10.1016/C2017-0-00712-710.1016/C2017-0-00712-7 ↗
5. Laser Additive Manufacturing, Brandt, M., Ed., Elsevier, 2017. https://doi.org/10.1016/C2014-0-03891-910.1016/C2014-0-03891-9 ↗
6. Razorenov, S.V., Garkushin, G.V., Savinykh, A.S., Klimova-Korsmik, O.G., Shalnova, S.A., and Gushchina, M.O., Dynamic Strength of VT6 Titanium Alloy Manufactured by Laser Metal Deposition, Phys. Mesomech., 2022, vol. 25, no. 1, pp. 26–32. https://doi.org/10.1134/S102995992201004010.1134/S1029959922010040 ↗
7. Razorenov, S.V., Garkushin, G.V., Savinykh, A.S., and Klimova-Korsmik, O.G., Spall Strength of 09CrNi2MoCu Steel Manufactured by Hot Rolling and Direct Laser Deposition in the Submicrosecond Loading Range, Phys. Mesomech., 2023, vol. 26, no. 1, pp. 48–55. https://doi.org/10.1134/S102995992301006X10.1134/S102995992301006X ↗
8. Krokhalev, A.V., Kharlamov, V.O., Kuzmin, S.V., and Lysak, V.I., Fundamentals of Wear-Resistant Coating Production from Chromium Carbide Powder Mixture with Metal Binder by Explosive Compaction, Izv. Vuzov. Tsvetn. Metall., 2018, no. 3, pp. 68–83. https://doi.org/10.17073/0021-3438-2018-3-68-8310.17073/0021-3438-2018-3-68-83 ↗
9. Savinykh, A.S., Mandel, K., Razorenov, S.V., and Kruger, L., The Influence of the Cobalt Content on the Strength Properties of Tungsten Carbide Ceramics under Dynamic Loads, Tech. Phys., 2018, vol. 63, pp. 357–362. https://doi.org/10.1134/S106378421803021010.1134/S1063784218030210 ↗
10. Krokhalev, A.V., Kharlamov, V.O., Chernikov, D.R., Chernikov, D.R., Kosova, E.A., Kuzmin, S.V., and Lysak, V.I., Research of the Compaction Mechanism of Mixtures of Refractory Carbide Powders with Metal Binder during Explosive Compaction on the Metal Substrate, Izv. VGTU, 2021, no. 4(251), pp. 42–47. https://doi.org/10.35211/1990-5297-2021-4-251-42-4710.35211/1990-5297-2021-4-251-42-47 ↗
11. Zhang, J., Guo, Z., Sang, S., Li, C., Li, B., Zhang, D., and Xie, L., Preparation of Bulk Nano-Aluminum Materials from Nanopowder Using Explosive Consolidation, J. Appl. Phys., 2022, vol. 131, no. 16. https://doi.org/10.1063/5.008805310.1063/5.0088053 ↗
12. Kolubaev, E.A., Rubtsov, V.E., Chumaevsky, A.V., and Astafurova, E.G., Micro-, Meso- and Macrostructural Design of Bulk Metallic and Polymetallic Materials by Wire-Feed Electron-Beam Additive Manufacturing, Phys. Mesomech., 2022, vol. 25, no. 6, pp. 479–491. https://doi.org/10.1134/S102995992206001710.1134/S1029959922060017 ↗
13. Zykova, A.P., Nikolaeva, A.V., Vorontsov, A.V., Chumaevskii, A.V., Nikonov, S.Yu., Moskvichev, E.N., Gurianov, D.A., Savchenko, N.L., Kolubaev, E.A., and Tarasov, S.Yu., Effect of Copper Content on Grain Structure Evolution in Additively Manufactured Ti-6Al-4V Alloy, Phys. Mesomech., 2023, vol. 26, no. 2, pp. 107–125. https://doi.org/10.1134/S102995992302001710.1134/S1029959923020017 ↗
14. French, M.R., Iii, W.A.Y., Pawlowski, A.E., Shyam, A., Splitter, D.A., Elliott, A.M., Carver, J.K., and Cordero, Z.C., Hypervelocity Impact of Additively Manufactured A356/316L Interpenetrating Phase Composites, in Solid Freeform Fabrication 2017: Proceedings of the 28th Annual International Solid Freeform Fabrication Symposium—An Additive Manufacturing Conference Hypervelocity, 2017. https://doi.org/10.26153/1694610.26153/16946 ↗
15. Poole, L.L., Gonzales, M., French, M.R., Yarberry, W.A., Moustafa, A.R., and Cordero, Z.C., Hypervelocity Impact of PrintCast 316L/A356 Composites, Int. J. Impact Eng., 2020, vol. 136, p. 103407. https://doi.org/10.1016/j.ijimpeng.2019.10340710.1016/j.ijimpeng.2019.103407 ↗
16. Cheng, J., Gussev, M., Allen, J., Hu, X., Moustafa, A.R., Splitter, D.A., and Shyam, A., Deformation and Failure of PrintCast A356/316 L Composites: Digital Image Correlation and Finite Element Modeling, Mater. Design, 2020, vol. 195, p. 109061. https://doi.org/10.1016/j.matdes.2020.10906110.1016/j.matdes.2020.109061 ↗
17. Physical Mesomechanics of Heterogeneous Media and Computer-Aided Design of Materials, Panin, V.E., Ed., Cambridge: Cambridge Interscience Publishing, 1998.
18. Karakulov, V.V., Smolin, I.Y., and Skripnyak, V.A., Numerical Investigation of Effective Mechanical Properties of Metal-Ceramic Composites with Reinforcing Inclusions of Different Shapes under Intensive Dynamic Impacts, AIP Conf. Proc., 2016, vol. 1783, p. 020081. https://doi.org/10.1063/1.496637410.1063/1.4966374 ↗
19. Mikushina, V.A., Smolin, I.Y., and Sidorenko, Y.N., Numerical Modeling and Prediction of Mechanical Properties of Ceramic Composite, J. Phys. Conf. Ser., 2017, vol. 919, no. 1, p. 012013. https://doi.org/10.1088/1742-6596/919/1/01201310.1088/1742-6596/919/1/012013 ↗
20. Romanova, V. and Balokhonov, R., A Method of Step-by-Step Packing and Its Application in Generating 3D Microstructures of Polycrystalline and Composite Materials, Eng. Comput., 2021, vol. 37, no. 1, pp. 241–250. https://doi.org/10.1007/s00366-019-00820-210.1007/s00366-019-00820-2 ↗
21. Karakulov, V.V., Smolin, I.Yu, and Kulkov, S.N., About Mechanical Behaviour of Metal Matrix Composites under Shock Wave Loading, J. Phys. Conf. Ser., 2020, vol. 1527, no. 1, p. 012020. https://doi.org/10.1088/1742-6596/1527/1/01202010.1088/1742-6596/1527/1/012020 ↗
22. Balokhonov, R.R., Sergeev, M.V., and Romanova, V.A., Simulation of Deformation and Fracture in Polycrystalline Aluminum Alloy under Dynamic Loading, Phys. Mesomech., 2023, vol. 26, no. 3, pp. 267–281. https://doi.org/10.1134/S102995992303003710.1134/S1029959923030037 ↗
23. Wriggers, P. and Moftah, S.O., Mesoscale Models for Concrete: Homogenisation and Damage Behaviour, Finite Elem. Analys. Design, 2006, vol. 42, no. 7, pp. 623–636. https://doi.org/10.1016/j.finel.2005.11.00810.1016/j.finel.2005.11.008 ↗
24. Karakulov, V.V, Smolin, I.Y., and Kulkov, S.N., Computer Simulation of Damage to Metal-Ceramic Composites under Shock Loading, IOP Conf. Ser. Mater. Sci. Eng., 2019, vol. 613, no. 1, p. 012010. https://doi.org/10.1088/1757-899x/613/1/01201010.1088/1757-899x/613/1/012010 ↗
25. Shilko, E.V., Smolin, A.Y., Dimaki, A.V., and Eremina, G.M., Particle-Based Approach for Simulation of Nonlinear Material Behavior in Contact Zones, in Springer Tracts in Mechanical Engineering, Springer Science and Business Media Deutschland GmbH, 2021, pp. 67–89. https://doi.org/10.1007/978-3-030-60124-9_410.1007/978-3-030-60124-9_4 ↗
26. Skripnyak, V.A., Skripnyak, E.G., Kozulin, A.A., Skripnyak, V.V., and Korobenkov, M.V., Computer Simulation of the Relation between Mechanical Behavior and Structural Evolution of Oxide Ceramics under Dynamic Loading, Russ. Phys. J., 2009, vol. 52, no. 12, pp. 1300–1308. https://doi.org/10.1007/s11182-010-9371-810.1007/s11182-010-9371-8 ↗
27. Radchenko, A.V., Batuev, S.P., Radchenko, P.A., and Melnikov, A.Y., Modeling of the Interaction of a Composite Orthotropic Plate with Ice Particles, Russ. Phys. J., 2023, vol. 66, no. 7, pp. 763–770. https://doi.org/10.1007/s11182-023-03003-110.1007/s11182-023-03003-1 ↗
28. Mishin, A.V., Various Methods of Averaging Heterogeneous Media, Novosibirsk: NSU, 2023.
29. Deng, Y., Zhang, W., and Cao, Z., Experimental Investigation on the Ballistic Resistance of Monolithic and Multi-Layered Plates against Ogival-Nosed Rigid Projectiles Impact, Mater. Design, 2013, vol. 44, pp. 228–239. https://doi.org/10.1016/j.matdes.2012.06.04810.1016/j.matdes.2012.06.048 ↗
30. Radchenko, P.A., Batuev, S.P., and Radchenko, A.V., Effect of Projectile Rotation on High-Velocity Impact Fracture, Phys. Mesomech., 2022, vol. 25, no. 2, pp. 119–128. https://doi.org/10.1134/S102995992202003510.1134/S1029959922020035 ↗
31. Kobylkin, I.F., and Selivanov, V.V., Materials and Structures of Light Armor Protection, Moscow: Publishing House of Bauman University, 2014.
32. Boldin, M.S., Berendeev, N.N., Melekhin, N.V., Popov, A.A., Nokhrin, A.V., and Chuvildeev, V.N., Review of Ballistic Performance of Alumina: Comparison of Alumina with Silicon Carbide and Boron Carbide, Ceramics Int., 2021, vol. 47, no. 18, pp. 25201–25213. https://doi.org/10.1016/j.ceramint.2021.06.06610.1016/j.ceramint.2021.06.066 ↗
33. Shevchenko, V.Ya., Silnikov, M.V., Dolgin, A.S., Sychev, M.M., Perevislov, S.N., Mikhailin, A.I., and Silnikov, N.M., Study of the Protective Properties of the New Ceramic Material “Ideal”, Izv. RARAS, 2021, vol. 4, no. 119, pp. 87–96. https://doi.org/10.53816/20753608_2021_4_8710.53816/20753608_2021_4_87 ↗
34. Bespalov, I.A., Scientific and Methodological Basis of Lightweight Armor Development, Izv. TGU. Tekh. Nauki, 2019, no. 5, pp. 404–413.
35. Bhatnagar, A., Lightweight Ballistic Composites, Elsevier, 2016. https://doi.org/10.1016/c2014-0-03657-x10.1016/c2014-0-03657-x ↗
36. Fomin, V.M., Golyshev, A.A., Kosarev, V.F., Malikov, A.G., Orishich, A.M., Ryashin, N.S., Filippov, A.A., and Shikalov, V.S., Creation of Heterogeneous Materials on the Basis of B4C and Ni Powders by the Method of Cold Spraying with Subsequent Layer-by-Layer Laser Treatment, J. Appl. Mech. Tech. Phys., 2017, vol. 58, pp. 947–955. https://doi.org/10.1134/S002189441705022410.1134/S0021894417050224 ↗
37. Lee, M., Park, S., Jo, I., and Lee, S., Analysis of Metal Matrix Composite (MMC) Applied Armor System, Proc. Eng., 2017, vol. 204, pp. 100–107. https://doi.org/10.1016/j.proeng.2017.09.76110.1016/j.proeng.2017.09.761 ↗
38. Kraus, E.I. and Shabalin, I.I., Comparison of Ballistic Resistance of Layered and Gradient Barriers to Impact, AIP Conf. Proc., 2019, vol. 2125, p. 030065. https://doi.org/10.1063/1.511744710.1063/1.5117447 ↗
39. York Duran, J.L., Kuhn, C., and Müller, R., Modeling of the Effective Properties of Metal Matrix Composites Using Computational Homogenization, Appl. Mech. Mater., 2017, vol. 869, pp. 94–111. https://doi.org/10.4028/www.scientific.net/amm.869.9410.4028/www.scientific.net/amm.869.94 ↗
40. Smirnov, S.V., Konovalov, A.V., Myasnikova, M.V., Khalevitsky, Y.V., and Smirnov, A.S., Hierarchical Modeling of Deformation and Damage of Metal Matrix Composite under Uniaxial Loading Conditions, IOP Conf. Ser. Mater. Sci. Eng., 2017, vol. 208, no. 1, p. 012037. https://doi.org/10.1088/1757-899x/208/1/01203710.1088/1757-899x/208/1/012037 ↗
41. Kraus, E.I., Shabalin, I.I., and Shabalin, T.I., Numerical Analysis of Wave Propagation in a Cermet Composite, AIP Conf. Proc., 2017, vol. 1893, p. 030130. https://doi.org/10.1063/1.500758810.1063/1.5007588 ↗
42. Kraus, A.E., Kraus, E.I., and Shabalin, I.I., A Heterogeneous Medium Model and Its Application in a Target Perforation Problems, in Multiscale Solid Mechanics. Advanced Structured Materials, vol. 141, Altenbach, H., Eremeyev, V.A., and Igumnov, L.A., Eds., Springer, pp. 289–304. https://doi.org/10.1007/978-3-030-54928-2_2210.1007/978-3-030-54928-2_22 ↗
43. Fomin, V.M., Golyshev, A.A., Malikov, A.G., Filippov, A.A., Shikalov, V.S., Yadrenkin, M.A., and Orishich, A.M., Experimental Investigation of the Effect of Laser Treatment on the Resistance of a Cermet Coating to a High-Speed Impact, J. Eng. Phys. Thermophys., 2022, vol. 95, pp. 1773–1779. https://doi.org/10.1007/s10891-022-02649-x10.1007/s10891-022-02649-x ↗
44. Filippov, A.A., Golyshev, A.A., Shikalov, V.S., and Buzyurkin, A.E., Investigation of Ti/B4C Coatings Microstructure Obtained by Cold Gas-Dynamic Spraying and Selective Laser Melting, AIP Conf. Proc., 2020, vol. 2288, p. 030080. https://doi.org/10.1063/5.002837510.1063/5.0028375 ↗
45. Kraus, A.E., Kraus, E.I., and Shabalin, I.I., Reactor 3D Software Performance on Penetration and Perforation Problems, in Behavior of Materials under Impact, Explosion, High Pressures and Dynamic Strain Rates, vol. 176, Orlov, M.Y. and Visakh, P.M., Eds., Springer, 2023, pp. 83–101. https://doi.org/10.1007/978-3-031-17073-7_610.1007/978-3-031-17073-7_6 ↗
46. Fomin, V.M., Gulidov, A.I., Sapozhnikov, G.A., Shabalin, I.I., Babakov, V.A., Kuropatenko, V.F., Kiselev, A.B., Trishin, Yu.A., Sadyrin, A.I., Kiselev, S.P., and Golovnev, I.F., High-Speed Interaction of Bodies, Novosibirsk: SB RAS, 1999.
47. Wilkins, M.L., Computer Simulation of Dynamic Phenomena: Scientific Computation, Berlin: Springer, 1999.10.1007/978-3-662-03885-7 ↗
48. Kraus, E.I. and Shabalin, I.I., A New Model to Determine the Shear Modulus and Poisson’s Ratio of Shock-Compressed Metals up to the Melting Point, High Pressure Res., 2021, vol. 41, no. 4, pp. 353–365. https://doi.org/10.1080/08957959.2021.197677510.1080/08957959.2021.1976775 ↗
49. Kraus, A., Buzyurkin, A., Shabalin, I., and Kraus, E., Numerical Modelling of High-Speed Loading of Periodic Interpenetrating Heterogeneous Media with Adapted Mesostructure, Appl. Sci., 2023, vol. 13, no. 12, p. 7187. https://doi.org/10.3390/app1312718710.3390/app13127187 ↗
50. Gust, W.H., Holt, A.C., and Royce, E.B., Dynamic Yield, Compressional, and Elastic Parameters for Several Lightweight Intermetallic Compounds, J. Appl. Phys., 1973, vol. 44, no. 2, pp. 550–560. https://doi.org/10.1063/1.166222410.1063/1.1662224 ↗
51. Kanel‘, G.I. and Pityulin, A.N., Shock-Wave Deformation of Titanium Carbide-Based Ceramics, Combust. Explos. Shock Waves, 1984, vol. 20, pp. 436–438. https://doi.org/10.1007/BF0078239610.1007/BF00782396 ↗
52. Dandekar, D.P. and Benfanti, D.C., Strength of Titanium Diboride under Shock Wave Loading, J. Appl. Phys., 1993, vol. 73, no. 2, pp. 673–679. https://doi.org/10.1063/1.35335010.1063/1.353350 ↗
53. Dandekar, D.P., Shear Strengths of Aluminium Nitride and Titanium Diboride under Plane Shock Wave Compression, J. Phys. IV, 1994, vol. 04, pp. C8-379–C8-384. https://doi.org/10.1051/jp4:199485810.1051/jp4:1994858 ↗
54. Trunin, R.F., Gudarenko, L.F., Zhernokletov, M.V., and Simakov, G.V., Experimental Data on Shock-Wave Compression and Adiabatic Expansion of Condensed Matter, Sarov: RFNC-VNIIEF, 2006.
55. Kraus, A.E., Buzyurkin, A.E., Shabalin, I.I., and Kraus, E.I., Identification of the Spallation Properties and Ultimate Spall Strength of Heterogeneous Materials in Dynamic Processes, Phys. Mesomech., 2024, vol. 27, no. 3, pp. 269–284. https://doi.org/10.1134/S102995992403004410.1134/S1029959924030044 ↗
56. Rozenberg, Z. and Yeshurun, Y., The Relation between Ballastic Efficiency and Compressive Strength of Ceramic Tiles, Int. J. Impact Eng., 1988, vol. 7, no. 3, pp. 357–362. https://doi.org/10.1016/0734-743x(88)90035-810.1016/0734-743x(88)90035-8 ↗
57. Alternative Test Methodology for Ballistic Performance Ranking of Armour Ceramics, Woolsey, P., Kokidko, D., and Mariano, S., Eds., Watertown, MA, 1989.
58. Roberson, C. and Hazell, P.J., Resistance of Silicon Carbide to Penetration by a Tungsten Carbide Cored Projectile, in Ceramic Transactions, John Wiley & Sons, Ltd., 2006, vol. 151, pp. 165–174. https://doi.org/10.1002/9781118406793.ch1410.1002/9781118406793.ch14 ↗
59. Rosenberg, Z., Bless, S., Yeshurun, Y., and Okajima, K., A New Definition of Ballistic Efficiency of Brittle Materials Based on the Use of Thick Backing Plates, in Proceedings of IMPACT 87 Symposium: Impact Loading and Dynamic Behavior of Materials, Chiem, C.Y., Kunze, H.-D., and Meyer, L.W., Eds., DCM Informationsgesellschaft Verlag, 1988, pp. 491–498.
60. Carton, E.P., Johnsen, B.B., Rahbek, D.-B., Broos, H., and Snippe, A., Round Robin Using the Depth of Penetration Test Method on an Armour Grade Alumina, Defence Technol., 2019, vol. 15, no. 6, pp. 829–836. https://doi.org/10.1016/j.dt.2019.07.01410.1016/j.dt.2019.07.014 ↗
61. Kraus, A.E., Kraus, E.I., and Shabalin, I.I., Impact Resistance of Ceramics in a Numerical Experiment, J. Appl. Mech. Tech. Phys., 2020, vol. 61, pp. 847–854. https://doi.org/10.1134/S002189442005020X10.1134/S002189442005020X ↗
62. Xiao, Y.K., Wu, H., Fang, Q., Zhang, W., and Kong, X.Z., Hemispherical Nosed Steel Projectile High-Speed Penetration into Aluminum Target, Mater. Design, 2017, vol. 133, pp. 237–254. https://doi.org/10.1016/j.matdes.2017.08.00210.1016/j.matdes.2017.08.002 ↗
63. Lu, Z.C. and Wen, H.M., On the Penetration of High Strength Steel Rods into Semi-Infinite Aluminium Alloy Targets, Int. J. Impact Eng., 2018, vol. 111, pp. 1–10. https://doi.org/10.1016/j.ijimpeng.2017.08.00610.1016/j.ijimpeng.2017.08.006 ↗