Multilevel crystal plasticity models of single- and polycrystals. Statistical models
Source abstract
Abstract
The paper provides a brief review of multilevel models (mostly, two-level models) that allow the description of deformation of single- and polycrystals and attendant microstructure evolution. Particular attention is given to models of texture formation. The paper covers models that are based on a statistical determination of characteristics of higher levels by appropriate characteristics of lower levels.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Physical Mesomechanics of Heterogeneous Media and Computer-Aided Design of Materials, Panin, V.E., Ed., Cambridge: Cambridge Interscience Publishing, 1998.
2. Lin, T.H., Physical Theory of Plasticity, Advances in Applied Mechanics, 1971, no. 11, p. 255.10.1016/S0065-2156(08)70344-2 ↗
3. Vishnyakov, Ya.D., Babareko, A.A., Vladimirov, S.A., and Egiz, I.V, Theory of Texture Formation in Metals and Alloys, Moscow: Nauka, 1979.
4. Bunge, H.J., Texture Analysis in Materials Science. Mathematical Methods, London: Butterworths, 1982.
5. Van Houtte, P., Calculation of the Yield Locus of Textured Polycrystals Using the Taylor and the Relaxed Taylor Theory, Texture Microstruct., 1987, vol. 7, pp. 29–72.10.1155/TSM.7.29 ↗
6. Raabe, D. and Roters, E, Using Texture Components in Crystal Plasticity Finite Element Simulations, Int. J. Plasticity, 2004, vol. 20, pp. 339–361.10.1016/S0749-6419(03)00092-5 ↗
7. Leffers, T. and Ray, R.K., The Brass-Type Texture and its Deviation from the Copper-Type Texture, Prog. Mater. Sci., 2009, vol. 54, pp. 351–396.10.1016/j.pmatsci.2008.09.002 ↗
8. Trusov, P.V. and Shveikin, A.I., Theory of Constitutive Relations. Part 2. Theory of Plasticity, Perm: Izd-vo PGTU, 2008.
9. Trusov, P.V. and Volegov, P.S., Crystal Plasticity Theories and Their Applications to the Description of Inelastic Deformations of Materials. Part 1: Rigid-Plastic and Elastoplastic Theories, Vestnik PGTU: Mechanics, 2011, no. 1, pp. 5–45.
10. Trusov, P.V. and Volegov, P.S., Crystal Plasticity Theories and Their Applications to the Description of Inelastic Deformations of Materials. Part 2: Viscoplastic and Elastovis-coplastic Theories, Vestnik PGTU: Mechanics, 2011, no. 2, p. 101–131.
11. Van Houtte, P., Delannay, L., and Samajdar, I., Quantitative Prediction of Cold Rolling Textures in Low-Carbon Steel by Means of the LAMEL Model, Texture Microstruct, 1999, vol. 31, pp. 109–149.10.1155/TSM.31.109 ↗
12. Bishop, J.F and Hill, R., A Theory of the Plastic Distortion of a Polycrystalline Aggregate under Combined Stresses, Phil. Mag. Ser. 7, 1951, vol. 42, no. 327, pp. 414–427.10.1080/14786445108561065 ↗
13. Bishop, J.F.W. and Hill, R., A Theoretical Derivation of the Plastic Properties of a Polycrystalline Face-Centered Metal, Phil. Mag. Ser. 7, 1951, vol. 42, no. 334, pp. 1298–1307.10.1080/14786444108561385 ↗
14. Taylor, G.I., Plastic Strain in Metals, J. Inst. Metals, 1938, vol. 62, pp. 307–324.
15. Habraken, A.M., Modelling the Plastic Anisotropy of Metals, Arch. Comput. Meth. Engng, 2004, vol. 11, no. 1, pp. 3–96.10.1007/BF02736210 ↗
16. Anand, L., Single-Crystal Elasto-Viscoplasticity: Application to Texture Evolution in Polycrystalline Metals at Large Strains, Comput. Method Appl. Mech., 2004, vol. 193, pp. 5359–5383.10.1016/j.cma.2003.12.068 ↗
17. Clayton, J.D. and McDowell, D.L., A Multiscale Multiplicative Decomposition for Elastoplasticity of Polycrystals, Int. J. Plasticity, 2003, vol. 19, pp. 1401–1444.10.1016/S0749-6419(02)00109-2 ↗
18. Deshpande, VS., Needleman, A., and van der Giessen, E., Finite Strain Discrete Dislocation Plasticity, J. Mech. Phys. Solids, 2003, vol. 51, pp. 2057–2083.10.1016/j.jmps.2003.09.012 ↗
19. Van Bael, A., van Houtte, P., Aernoudt, E., Hall, F.R., Pillinger, I., Hartley, P., and Sturgess, C.E.N., Anisotropic Finite-Element Analysis of Plastic Metalforming Processes, Texture Microstruct, 1991, vol. 14–18, pp. 1007–1012.10.1155/TSM.14-18.1007 ↗
20. Asaro, R.J. and Needleman, A., Texture Development and Strain Hardening in Rate Dependent Polycrystals, Acta Metall, 1985, vol. 33, no. 6, pp. 923–953.10.1016/0001-6160(85)90188-9 ↗
21. Van Houtte, P. and Aernoudt, E., Solution of the Generalized Taylor Theory of Plastic Flow. Part I. Introduction and Linear Programming. Part II. The Taylor Theory, Z Metallkunde, 1975, vol. 66, no. 4, pp. 202–209.
22. Van Houtte, P. and Aernoudt, E., Solution of the Generalized Taylor Theory of Plastic Flow. Part III. Applications, Z Metallkunde, 1975, vol. 66, no. 5, pp. 303–306.
23. Van Houtte, P., Mols, K., van Bael, A., and Aernoudt, E., Application of Yield Loci Calculated from Texture Data, Texture Microstruct, 1989, vol. 11, pp. 23–39.10.1155/TSM.11.23 ↗
24. Wagner, F., Canova, G., van Houtte, P., and Molinari, A., Comparison of Simulated and Experimental Deformation Textures for BCC Metals, Texture Microstruct, 1991, vol. 14–18, pp. 1135–1140.10.1155/TSM.14-18.1135 ↗
25. Peeters, B., Seefeldt, M., van Houtte, P., and Aernoudt, E., Taylor Ambiguity in bcc Polycrystalls: A Non-Problem if Substructural Anisotropy is Considered, Scripta Mater, 2001, vol. 45, pp. 1349–1356.10.1016/S1359-6462(01)01168-X ↗
26. Van Houtte, P., Li, S., Seefeldt, M., and Delannay, L., Deformation Texture Prediction: from the Taylor Model to 11. the Advanced LAMEL, Int. J. Plasticity, 2005, vol. 21, pp. 589–624.10.1016/j.ijplas.2004.04.011 ↗
27. Hill, R., Generalized Constitutive Relations for Incremental Deformation of Metal Crystals for Multislip, J. Mech. Phys. Solids, 1996, vol. 14, pp. 95–102.10.1016/0022-5096(66)90040-8 ↗
28. Peeters, B., Bacroix, B., Teodosiu, C., van Houtte, P., and Aernoudt, E., Work Hardening-Softening Behaviour of bcc Polycrystals during Changing Strain Paths: II. TEM Observations of Dislocation Sheets in an IF Steel during Two-Stage Strain Paths and their Representation in Terms of Dislocation Densities, Acta Mater., 2001, vol. 49, pp. 1621–1632.10.1016/S1359-6454(01)00067-2 ↗
29. Peeters, B., Kalidindi, S.R., Teodosiu, C., van Houtte, P., and Aernoudt, E., A Theoretical Investigation of the Influence of Dislocation Sheets on Evolution of Yield Surfaces in Single-Phase bcc Polycrystalls, J. Mech. Phys. Solids, 2002, vol. 50, no. 4, pp. 783–807.10.1016/S0022-5096(01)00094-1 ↗
30. Peeters, B., Seefeldt, M., Teodosiu, C., van Houtte, P., and Aernoudt, E., Work Hardening-Softening Behaviour of bcc Polycrystals during Changing Strain Paths: I. An Integrated Model Based on Substructure and Texture Evolution, and its Prediction of the Stress-Strain of an IF Steel during Two-Stage Strain Paths, Acta Mater., 2001, vol. 49, pp. 1607–1619.10.1016/S1359-6454(01)00066-0 ↗
31. Van Houtte, P. and Peeters, B., Effect of Deformation-Induced Intragranular Microstructure on Plastic Anisotropy and Deformation Textures, Mater. Sci. Forum, 2002, vol. 408–412, pp. 985–990.10.4028/www.scientific.net/MSF.408-412.985 ↗
32. Toth, L.S., Gilormini, P., and Jonas, J.J., Effect of Rate Sensitivity on the Stability of Torsion Textures, Acta Metall., 1988, vol. 36, no. 12, pp. 3077–3091.10.1016/0001-6160(88)90045-4 ↗
33. Van Houtte, P., Crystal Plasticity Based Modelling of Deformation Textures, Microstructure and Texture in Steels, Haldar, A., Suwas, S., and Bhattacharjee, D., Eds., London: Springer, 2009, pp. 209–224.10.1007/978-1-84882-454-6_12 ↗
34. Van Houtte, P., Kanjarla, A.K., Seefeldt, M., and Delannay, L., Study of Plastic Strain Heterogeneity in a Polycrystal at Mesoscale, Vopr. Materialoved., 2007, vol. 4, no. 52, pp. 7–12.
35. Dancette, S., Delannay, L., Jodlowski, T., and Giovanola, J., Multisite Model Prediction of Texture Induced Anisotropy in Brass, Int. J. Mater. Form., 2010, vol. 3,suppl. 1, pp. 251–254.10.1007/s12289-010-0754-8 ↗
36. Poynting, J.H., On Pressure Perpendicular to the Shear Planes in Finite Pure Shears and on the Lengthening of Loaded Wires when Twisted, Proc. Roy. Soc. (London) A, 1909, vol. 82, pp. 546–559.10.1098/rspa.1909.0059 ↗
37. Poynting, J.H., On the Changes in the Dimensions of a Steel Wire when Twisted, and on the Pressure of Distortion Waves in Steel, Proc. Roy. Soc. (London) A, 1912, vol. 86, pp. 534–561.10.1098/rspa.1912.0045 ↗
38. Swift, H.W., Length Changes in Metals under Torsional Overstrain, Engineering, 1947, vol. 163, p. 253.
39. Mahesh, S., A Hierarchical Model for Rate-Dependent Polycrystals, Int. J. Plasticity, 2009, vol. 25, pp. 752–767.10.1016/j.ijplas.2008.06.011 ↗
40. Ahzi, S. and M’Guil, S., A New Intermediate Model for Polycrystalline Viscoplastic Deformation and Texture Evolution, Acta Mater, 2008, vol. 56, pp. 5359–5369.10.1016/j.actamat.2008.07.007 ↗
41. M’Guil, S., Ahzi, S., Youssef, H., Baniassadi, M., and Gracio, J.J., A Comparison of Viscoplastic Intermediate Approaches for Deformation Texture Evolution in Face-Centered Cubic Polycrystals, Acta Mater., 2009, vol. 51, no. 8, p. 2496.10.1016/j.actamat.2009.02.001 ↗
42. M’Guil, S., Wen, W., and Ahzi, S., Numerical Study of Deformation Textures, Yield Locus, Rolling Components and Lankford Coefficients for fcc Polycrystals Using the New Polycrystalline ϕ-model, Int. J. Mech. Sci., 2010, vol. 52, no. 10, p. 1313.10.1016/j.ijmecsci.2010.06.006 ↗
43. Franz, G., Abed-Meraim, F., Ben Zineb, T., Lemoine, X., and Berveiller, M., Strain Localization Analysis Using a Multiscale Model, Comp. Mater. Sci., 2009, vol. 45, pp. 768–773.10.1016/j.commatsci.2008.05.033 ↗
44. Makarov, P.V, Modeling of Deformation and Fracture at the Mesolevel, Izv. AN: Mekh. Tv. Tela, 1999, no. 5, pp. 109–130.
45. Makarov, P.V, Loaded Material as a Nonlinear Dynamical System. Simulation Problems, Phys. Mesomech., 2005, vol. 9, no. 1–2, pp. 37–56.
46. Makarov, P.V, Evolutionary Nature of Structure Formation in Lithospheric Material: Universal Principle for Fractality of Solids, Russ. Geol. Geophys., 2007, vol. 48, no. 7, pp. 558–746.10.1016/j.rgg.2007.06.003 ↗
47. Makarov, P.V., Smolin, I.Yu., Stefanov, Yu.P., Kuznetsov, P.V., Trubitsyn, A.A., Trubitsyna, N.V., Voroshilov, S.P., and Voroshilov, Ya.S., Nonlinear Mechanics of Geomaterials and Geomedia, Zuev, L.B., Ed., Novosibirsk: Akadem. Izd-vo GEO, 2007.
48. Aris, S., Pyzalla, A., and Reimers, W., Simulation of the Development of Deformation Textures and Residual Stresses Using the Taylor-Bishop-Hill Theory, Comput. Mater. Sci., 1999, vol. 16, pp. 76–80.10.1016/S0927-0256(99)00048-8 ↗
49. Kowalczyk, K. and Gambin, W., Model of Plastic Anisotropy Evolution with Texture-Dependent Yield Surface, Int. J. Plasticity, 2004, vol. 20, pp. 19–54.10.1016/S0749-6419(03)00010-X ↗
50. Hill, R., The Mathematical Theory of Plasticity, Oxford: Clarendon Press, 1998.10.1093/oso/9780198503675.001.0001 ↗
51. Cleja-Tigoiu, S., Nonlinear Elasto-Plastic Deformations of Transversely Isotropic Material and Plastic Spin, Int. J. Eng. Sci., 2000, vol. 38, pp. 737–763.10.1016/S0020-7225(99)00039-7 ↗
52. Darrieulat, M. and Montheillet, F., A Texture Based Continuum Approach for Predicting the Plastic Behaviour of Rolled Sheet, Int. J. Plasticity, 2003, vol. 19, pp. 517–546.10.1016/S0749-6419(01)00071-7 ↗
53. Li, S., Hoferlin, E., van Bael, A., van Houtte, P., and Teodosiu, C., Finite Element Modeling of Plastic Anisotropy Induced by Texture and Strain-Path Change, Int. J. Plasticity, 2003, vol. 19, pp. 647–674.10.1016/S0749-6419(01)00079-1 ↗
54. Van Houtte, P. and van Bael, A., Convex Plastic Potentials of Fourth and Sixth Rank for Anisotropic Materials, Int. J. Plasticity, 2004, vol. 20, pp. 1505–1524.10.1016/j.ijplas.2003.11.005 ↗
55. Unger, J.F. and Konke, C., Coupling of Scales in a Multiscale Simulation Using Neural Networks, Comput. Struct, 2008, vol. 86, pp. 1994–2003.10.1016/j.compstruc.2008.05.004 ↗