Designing Tb-doped Mn-Ni-Cu ferrite meta-absorbers for a broad frequency range: Magnetodielectric, physical, reflection loss, and absorptivity characteristics

Developing meta-absorbers with exceptional EM wave absorption, shielding capacity, and superior dissipation performance remains worthwhile in the gigahertz (GHz) range. Electromagnetic pollution has a detrimental impact on the health of living organisms due to the emergence of high-frequency waves from communication devices. The challenges were addressed by preparing, designing, and simulating ferrite-based meta-absorbers. The nanoferrites of Tb-doped Mn-Ni-Cu (Mn _0.2Ni _0.3Cu _0.5Tb _xFe _2-xO ₄) with different levels of Tb (x = 0.00, 0.025, 0.05, 0.075) were prepared utilizing the sol-gel auto combustion technique. The phase, structural, elastic, and magnetic features of the Tb-doped Mn-Ni-Cu ferrites were examined using XRD, FESEM, FTIR, and VSM techniques, respectively. The MAUD software was utilized to obtain refinement and precise structural characteristics. The force constant, phase, and elastic properties were also assessed. The magnetization and coercivity exhibited a reduction. An assessment was conducted on the performance of field switching and high-frequency response. At high frequencies, the dielectric characteristics, such as complex permeability and permittivity, exhibit greater values, while losses diminish. At a frequency of 4.6 GHz, a reflection loss (RL) of −54.21 dB was measured for x = 0.05, whereas a reflection loss of −54.03 dB was measured for x = 0.075. The meta-absorbers of Tb-doped Mn-Ni-Cu ferrites were designed and simulated. The absorptivity of the Tb-doped Mn-Ni-Cu ferrite substrate material is illustrated. The meta-absorber exhibited three distinct absorption peaks at frequencies of 1.5, 2.5, and 4.5–6 GHz, respectively. The absorptivity of the material likewise rises with an increase in the incidence angle; the material`s absorptivity also increases. The TM mode exhibited the highest values at an angle of 60 degrees, while the TE mode displayed the highest values at an angle of 0 degrees. Tb-doped Mn-Ni-Cu ferrites are effective for electromagnetic interference (EMI), multilayer ceramic integrated circuits (MLCIs), shielding, and absorbing high-frequency signals in 5 G applications.