Wear behaviour of a gradient surface produced by a punching process in a Cu-30 Ni alloy

The grain size variation in a gradient surface produced by a punching and recovery process on a Cu-30Ni alloy has been observed by atomic force microscopy. The friction characteristics of the gradient surface in a 3.5 wt% NaCl solution were investigated using a micro-indenter probe, a pin-on-disc type tribometer, a strain sensor and an optical microscope. The results showed that the hardness and grain size can be well represented by the Hall–Petch relationship when the gain size is more than 30 nm. The wear rate, friction coefficient and adhesive force all increase depth below the surface. These variations are attributed to a gradual increasing grain size with depth. The morphologies of the worn track were also studied to understand further the corrosive wear behaviour of gradient surfaces.