Effects of Si additions on microstructures and mechanical properties of VNbTiTaSi refractory high-entropy alloys
Source abstract
Abstract
(VNbTiTa) 100-xSi x ( x = 0, 2.5, 5, 10) refractory high-entropy alloys (RHEAs) are investigated in this paper. The equal molar VNbTiTa RHEA exhibits a room-temperature yield strength of 704 MPa and good compressive ductility (fracture strain> 50%). Si additions can introduce BCC+M 5Si 3 eutectic formed at inter-dendrite areas, and when the Si content reaches 10% in mole, extra bulk M 3 Si phase was observed. The precipitated silicides greatly improve the yield strength up to 1671 MPa. As the temperature increases, the strengthening effect of silicide becomes weaker, and almost disappeared at 1200 ℃. Nanoscale silicides can precipitate during high-temperature deformations. (VNbTiTa) 97.5Si 2.5 RHEA possesses an excellent combination of room-temperature ductility 34% and yield strength 505 MPa at 1000 ℃.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Alloy design for aircraft engines10.1038/nmat4709 ↗
2. Reed · 2008
3. The hotter the engine, the better10.1126/science.1179327 ↗
4. Alloys by design: modelling next generation superalloys10.1179/174328408X372056 ↗
5. Co-Re-based alloys: a new class of high temperature materials?10.1002/adem.200700132 ↗
6. Ultrahigh-temperature Nb-silicide-based composites10.1557/mrs2003.192 ↗
7. Ultrahigh-temperature materials for jet engines10.1557/mrs2003.189 ↗
8. Mo-Si-B alloys: developing a revolutionary turbine-engine material10.1557/mrs2003.191 ↗
9. New class of high-temperature alloys: eutectic high-entropy alloys10.1038/srep06200 ↗
10. A novel bulk eutectic high-entropy alloy with outstanding as-cast specific yield strengths at elevated temperatures10.1016/j.scriptamat.2021.114132 ↗
11. Promising properties and future trend of eutectic high entropy alloys10.1016/j.scriptamat.2020.06.022 ↗
12. Refractory high-entropy alloys10.1016/j.intermet.2010.05.014 ↗
13. Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys10.1016/j.intermet.2011.01.004 ↗
14. Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy10.1007/s10853-012-6260-2 ↗
15. Lattice-distortion-enhanced yield strength in a refractory high-entropy alloy10.1002/adma.202004029 ↗
16. Microstructures and mechanical properties of ductile NbTaTiV refractory high entropy alloy prepared by powder metallurgy10.1016/j.jallcom.2018.10.230 ↗
17. On the brittle-to-ductile transition of the as-cast TiVNbTa refractory high-entropy alloy10.1016/j.mtla.2020.100940 ↗
18. Designing TiVNbTaSi refractory high-entropy alloys with ambient tensile ductility10.1016/j.scriptamat.2021.114230 ↗
19. High temperature oxidation behaviors of equimolar NbTiZrV and NbTiZrCr refractory complex concentrated alloys (RCCAs)10.1016/j.jallcom.2017.09.164 ↗
20. Effect of aluminum on the microstructure and properties of two refractory high-entropy alloys10.1016/j.actamat.2014.01.029 ↗
21. Microstructure and properties of aluminum-containing refractory high-entropy alloys10.1007/s11837-014-1066-0 ↗
22. Development of a refractory high entropy superalloy10.3390/e18030102 ↗
23. Microstructure and properties of a refractory NbCrMo0.5Ta0.5TiZr alloy10.1016/j.msea.2011.09.033 ↗
24. Low-density, refractory multi-principal element alloys of the Cr-Nb-Ti-V-Zr system: microstructure and phase analysis10.1016/j.actamat.2012.11.032 ↗
25. Mechanical properties of low-density, refractory multi-principal element alloys of the Cr-Nb-Ti-V-Zr system10.1016/j.msea.2012.12.018 ↗
26. Microstructure and mechanical properties of refractory high entropy (Mo0.5NbHf0.5ZrTi)(BCC)/M5Si3 in-situ compound10.1016/j.jallcom.2015.11.091 ↗
27. Microstructure and mechanical properties of a refractory HfNbTiVSi0.5 high-entropy alloy composite10.1016/j.matlet.2016.03.092 ↗
28. Microstructure and mechanical properties of refractory HfMo0.5NbTiV0.5Six high-entropy composites10.1016/j.jallcom.2016.10.014 ↗
29. NbMoTiVSix refractory high entropy alloys strengthened by forming BCC phase and silicide eutectic structure10.1016/j.jmst.2020.04.050 ↗
30. Effect of Si additions on microstructure and mechanical properties of refractory NbTaWMo high-entropy alloys (vol 54, pg 5844, 2019)
31. Oxidation behavior between 700 and 1300 ℃ of refractory TiZrNbHfTa high-entropy alloys containing aluminum10.1002/adem.201700948 ↗
32. High temperature oxidation behavior of an equimolar refractory metal-based alloy 20Nb-20Mo-20Cr-20Ti-20Al with and without Si addition10.1016/j.jallcom.2016.07.219 ↗
33. Alloys for application at ultra-high temperatures: Nb-silicide in situ composites: Challenges, breakthroughs and opportunities
34. High temperature strength of refractory complex concentrated alloys10.1016/j.actamat.2019.06.032 ↗
35. Precipitation of γNb 5 Si 3 in Nb-Si based ultrahigh temperature alloys10.1016/j.intermet.2018.04.007 ↗
36. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
37. Evolution of the microstructure and hardness of the Ti–Si alloys during high temperature heat-treatment10.1016/j.jallcom.2009.01.017 ↗
38. Microstructural and mechanical characterization of Nb-based in situ composites from Nb–Si–Ti ternary system10.1016/j.actamat.2007.08.012 ↗
39. Microstructure-property relations of eutectic V-Si and V-B alloys10.1088/1757-899X/882/1/012014 ↗
40. Thermodynamic assessment of the Si-Ta and Si-W systems10.1007/s11669-009-9579-x ↗
41. Silicide precipitation in the Ti-Zr-Al-Si system
42. Silicon distribution and silicide precipitation during annealing in an advanced multi-phase γ-TiAl based alloy10.1016/j.actamat.2016.03.050 ↗
43. Ab initio-based prediction and TEM study of silicide precipitation in titanium10.1016/j.commatsci.2014.08.010 ↗
44. Newly developed Ti–Nb–Zr–Ta–Si–Fe biomedical beta titanium alloys with increased strength and enhanced biocompatibility10.1016/j.msec.2015.11.043 ↗
45. Effect of silicide precipitation on tensile properties and fracture of alloy Ti-6Al-5Zr-0.5Mo-0.25Si10.1007/BF02815304 ↗
46. HRTEM observation of silicides and Laves phase precipitates in Nb-Ti-Si based alloys10.1016/j.ijrmhm.2018.09.005 ↗
47. Si-V (Silicon-Vanadium10.1007/s11669-010-9733-5 ↗
48. The Nb-Si (Niobium-Silicon) system10.1007/BF02671971 ↗
49. The Si-Ta (silicon-tantalum) system10.1007/BF02667688 ↗
50. Effect of Zr and Hf additions on microstructure and mechanical properties of Nb–Si based ultrahigh temperature alloys10.1016/j.jmrt.2020.11.013 ↗
51. Insight into the influence of alloying elements on mechanical and thermodynamic properties of Nb3Si: a first-principles calculations10.1557/jmr.2017.289 ↗
52. Flow softening behavior during hot compression of a Nb-Si based ultrahigh temperature alloy10.1016/j.jallcom.2017.10.122 ↗
53. Hot deformation behaviors of arc melted and heat treated NbSi based ultrahigh temperature alloys10.1016/j.ijrmhm.2019.105015 ↗
54. The nucleation of recrystallization at second phase particles in deformed aluminium10.1016/0001-6160(77)90109-2 ↗
55. Controlling grain structure and texture in Al-Mn from the competition between precipitation and recrystallization10.1016/j.actamat.2017.09.032 ↗
56. Phase relations and transformation kinetics in the high Nb region of the Nb-Si system10.1016/0956-716X(91)90387-G ↗
57. Effects of Zr on the eutectoid decomposition behavior of Nb3Si into (Nb)/Nb5Si310.1007/s11661-005-0162-8 ↗
58. Development and exploration of refractory high entropy alloys – a review10.1557/jmr.2018.153 ↗
59. https://inconel-718.com/.
60. Properties of cast Mar-M-247 for turbine blisk applications
61. Crystallographic ordering in a series of Al-containing refractory high entropy alloys Ta–Nb–Mo–Cr–Ti–Al10.1016/j.actamat.2019.07.001 ↗
62. Alloy design for intrinsically ductile refractory high-entropy alloys10.1063/1.4966659 ↗
63. Tuning ideal tensile strengths and intrinsic ductility of bcc refractory alloys10.1103/PhysRevLett.112.115503 ↗
64. Structure and high-temperature properties of Ti5Si3 with interstitial additions
65. Lattice distortion in a strong and ductile refractory high-entropy alloy10.1016/j.actamat.2018.08.053 ↗