journal article·2021-12

Grain boundary engineering and its implications on corrosion behavior of equiatomic CoCrFeMnNi high entropy alloy

Hemanth Thota, R. Jeyaraam, Lipika Rani Bairi, Aditya Srinivasan Tirunilai, Alexander Kauffmann, Jens Freudenberger, Martin Heilmaier, Sumantra Mandal, Subramanya Sarma Vadlamani

Publisher page

Abstract

Abstract In the present study, strain-annealing based thermo-mechanical processing was employed to achieve a grain boundary engineered (GBE) microstructure in an equiatomic CoCrFeMnNi high entropy alloy (Cantor alloy) with a single phase, fcc structure. Cast, homogenized and recrystallized strips were cold rolled to 5%, 10% and 15% thickness reductions and annealed at temperatures from 1173 K to 1373 K for 1–6 h duration. Deformation twins were observed following cold rolling to 15%. From the deformed and annealed specimens, GBE microstructure was identified based on coincident site lattice (CSL) (Σ ≤ 29) boundary length fraction, number of twins per grain, triple junctions (TJs) character distribution and grain boundary plane orientations. Specimens rolled to 5% and annealed at 1223 K for 1 h exhibited GBE microstructure. The Σ3 fraction was enhanced from ~44% to ~62% in the GBE specimen with concurrent increments in TJs containing at least two CSL boundaries from ~20% to ~40% compared to as-recrystallized (AR) specimen. Potentiodynamic polarization studies revealed that the GBE specimen exhibited lower corrosion rate in both 0.1 M and 0.6 M NaCl solutions as compared to AR counterpart. The GBE specimen also displayed better passive film resistance due to higher polarization and charge transfer resistance, as evaluated from electrochemical impedance spectroscopy studies.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Murty · 2019
2. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
3. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
4. High-entropy alloys: a critical review10.1080/21663831.2014.912690 ↗
5. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
6. Ni tracer diffusion in CoCrFeNi and CoCrFeMnNi high entropy alloys10.1016/j.jallcom.2016.07.239 ↗
7. The deformation behavior and strain rate sensitivity of ultra-fine grained CoNiFeCrMn high-entropy alloys at temperatures ranging from 77 K to 573 K10.1016/j.jallcom.2019.03.373 ↗
8. Temperature and load-ratio dependent fatigue-crack growth in the CrMnFeCoNi high-entropy alloy10.1016/j.jallcom.2019.04.234 ↗
9. Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy10.1016/j.actamat.2016.07.038 ↗
10. An approach to grain boundary design for strong and ductile polycrystals
11. Twinning-related grain boundary engineering10.1016/j.actamat.2004.05.031 ↗
12. Mechanisms of grain boundary engineering10.1016/j.actamat.2005.11.046 ↗
13. Implication of grain boundary engineering on high temperature hot corrosion of alloy 61710.1016/j.corsci.2016.01.019 ↗
14. Role of grain boundary engineered microstructure on high temperature steam oxidation behaviour of Ni based superalloy alloy 61710.1016/j.jallcom.2018.11.137 ↗
15. Effect of grain boundary character distribution on weld heat-affected zone liquation cracking behavior of AISI 316Ti austenitic stainless steel10.1016/j.matchar.2018.05.020 ↗
16. A critical evaluation on efficacy of recrystallization vs. strain induced boundary migration in achieving grain boundary engineered microstructure in a Ni-base superalloy10.1016/j.actamat.2017.12.045 ↗
17. Evolution of microstructure and properties in alpha-brass after iterative processing10.1007/s11661-002-0193-3 ↗
18. Microstructure evolution during low-strain thermo-mechanical processing and its repercussion on intergranular corrosion in alloy 600H10.1016/j.matchar.2018.09.019 ↗
19. Analysis of the creep strength of a low-carbon AISI 304 steel with low-Σ grain boundaries10.1016/S0921-5093(02)00903-6 ↗
20. High-cycle fatigue of nickel-based superalloy ME3 at ambient and elevated temperatures: role of grain-boundary engineering10.1007/s11661-005-0007-5 ↗
21. Role of carbide precipitates and process parameters on achieving grain boundary engineered microstructure in a Ni-based superalloy10.1007/s11661-015-3064-4 ↗
22. Size effect, critical resolved shear stress, stacking fault energy, and solid solution strengthening in the CrMnFeCoNi high-entropy alloy10.1038/srep35863 ↗
23. Microstructural evolution after thermomechanical processing in an equiatomic, single-phase CoCrFeMnNi high-entropy alloy with special focus on twin boundaries10.1016/j.intermet.2014.05.014 ↗
24. Effect of one-step recrystallization on the grain boundary evolution of CoCrFeMnNi high entropy alloy and its subsystems
25. Control of brittleness and development of desirable mechanical properties in polycrystalline systems by grain boundary engineering10.1016/S1359-6454(99)00275-X ↗
26. Evolution of the annealing twin density during δ-Supersolvus grain growth in the nickel-based superalloy InconelTM 71810.3390/met6010005 ↗
27. Quantification of multiple twinning in face centred cubic materials10.1016/j.actamat.2010.09.029 ↗
28. Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution10.1016/j.corsci.2018.02.031 ↗
29. Oxide MnCr2O4 induced pitting corrosion in high entropy alloy CrMnFeCoNi10.1016/j.mtla.2019.100275 ↗
30. The corrosion behavior of ultra-fine grained CoNiFeCrMn high-entropy alloys10.1016/j.jallcom.2019.152583 ↗
31. Effect of the grain size on the corrosion behavior of CoCrFeMnNi HEAs in a 0.5 M H2SO4 solution10.1016/j.jallcom.2020.157712 ↗
32. Peculiarities of deformation of CoCrFeMnNi at cryogenic temperatures10.1557/jmr.2018.252 ↗
33. Theory and application of electron channelling contrast imaging under controlled diffraction conditions10.1016/j.actamat.2014.04.018 ↗
34. Discrimination of dynamically and post-dynamically recrystallized grains based on EBSD data: application to Inconel 71810.1111/jmi.12769 ↗
35. The structure of high-angle grain boundaries10.1016/0001-6160(66)90168-4 ↗
36. ARPGE: A computer program to automatically reconstruct the parent grains from electron backscatter diffraction data10.1107/S0021889807048777 ↗
37. Thermo-mechanical factors influencing annealing twin development in nickel during recrystallization10.1007/s10853-015-9067-0 ↗
38. Phase field modelling of annealing twin formation, evolution and interactions during grain growth10.1016/j.commatsci.2020.109787 ↗
39. Formation of annealing twins during recrystallization and grain growth in 304L austenitic stainless steel10.4028/www.scientific.net/MSF.753.113 ↗
40. Annealing twin development during recrystallization and grain growth in pure nickel10.1016/j.msea.2014.01.018 ↗
41. On the significance of misorientation axes of CSL boundaries in triple junctions in cubic materials10.1016/j.matchar.2019.03.011 ↗
42. Studies on twinning and grain boundary character distribution during anomalous grain growth in a Ti-modified austenitic stainless steel10.1016/j.msea.2009.02.042 ↗
43. Unraveling the origin of twin related domains and grain boundary evolution during grain boundary engineering10.1016/j.actamat.2017.10.007 ↗
44. Five-parameter grain boundary distribution of commercially grain boundary engineered nickel and copper10.1016/j.actamat.2008.01.039 ↗
45. Study of grain boundary character along intergranular stress corrosion crack paths in austenitic alloys10.1016/S1359-6454(01)00064-7 ↗
46. A study of grain boundary statistics in 304 and 316L stainless steels10.1080/01418619108225351 ↗
47. Validation of corrosion rates measured by the Tafel extrapolation method10.1016/j.corsci.2005.05.046 ↗
48. Individual and synergistic influences of microstructural features on intergranular corrosion behavior in extra-low carbon type 304L austenitic stainless steel10.1016/j.corsci.2018.05.014 ↗
49. Effect of grain size on pitting corrosion of 304L austenitic stainless steel10.1016/j.corsci.2015.02.024 ↗
50. The influence of strain on the passive behavior of carbon steel in cement extract10.1016/j.corsci.2012.08.060 ↗
51. Metastable pitting corrosion of stainless steel and the transition to stability
52. Effect of grain size on corrosion: a review10.5006/1.3462912 ↗
53. Optimization of grain boundary character distribution for intergranular corrosion resistant 304 stainless steel by twin-induced grain boundary engineering10.1016/S1359-6454(02)00064-2 ↗
54. Triple-line corrosion in high purity nickel10.1016/0921-5093(89)90300-6 ↗
55. Dependence of corrosion resistance on grain boundary characteristics in a high nitrogen CrMn austenitic stainless steel10.1016/j.jmst.2017.09.016 ↗
56. Effect of microstructures on corrosion behavior of nickel coatings: (II) competitive effect of grain size and twins density on corrosion behavior10.1016/j.jmst.2015.11.013 ↗
57. Influence of the individual microstructural features on pitting corrosion in type 304 austenitic stainless steel10.1016/j.corsci.2019.108091 ↗
58. Kelly · 2002
59. An electrochemical impedance spectroscopic study of the passive state on Alloy-2210.1016/j.electacta.2005.02.103 ↗
60. Effect of spheroidized microstructure on the impact toughness and electrochemical performance of a high-carbon steel
61. A potential insight into the serration behaviour of Σ3n (n≤3) boundaries in Alloy 61710.1016/j.matchemphys.2020.122919 ↗
62. Passive film of 18-8 stainless steel structure and its function10.1016/0010-938X(73)90031-0 ↗
63. Barsoukov · 2018
64. Corrosion protection of AISI 1018 steel using Co-doped TiO2/polypyrrole nanocomposites in 3.5% NaCl solution10.1016/j.matchemphys.2017.01.085 ↗
65. Electrochemical study of the inhibition of corrosion of stainless steel by 1,2,3-benzotriazole in acidic media10.1016/j.matchemphys.2007.12.002 ↗
66. Effects of graphite on the corrosion behavior of aluminum-graphite composite in sodium chloride solutions10.1016/S1452-3981(23)15058-9 ↗
67. Passivation behavior and surface chemistry of 2507 super duplex stainless steel in artificial seawater: influence of dissolved oxygen and pH10.1016/j.corsci.2019.02.002 ↗
68. CPE analysis by local electrochemical impedance spectroscopy10.1016/j.electacta.2005.02.128 ↗
69. Concerning the conversion of the constant phase element parameter Y0 into a capacitance10.5006/1.3280607 ↗
70. Comprehending the role of individual microstructural features on electrochemical response and passive film behaviour in type 304 austenitic stainless steel10.1016/j.corsci.2020.109187 ↗