High-aluminum fly ash recycling for fabrication of cost-effective ceramic membrane supports
Source abstract
Abstract
Abstract In order to effectively utilize the industrial solid waste and produce high value-added products, a series of porous ceramic membrane supports made of waste fly ash and calcium carbonate mixtures were fabricated by in-situ reaction sintering method. The ceramic membrane supports with 15, 20, 25 wt % CaCO3 sintered at the range of 1200–1350 °C show the high open porosity over 30% and are further investigated. The investigated ceramic membrane supports give the main phase of anorthite, some of which contain a minor mullite phase. The pore sizes of ceramic membrane supports increase with increasing of the amount of CaCO3 and sintering temperature. The flexural strengths of ceramic membrane supports increase with sintering temperature. They are higher than 30 MPa and meet the requirement of application. This work provides a potential route to develop cost-effective ceramic membrane supports with controllable pore size, high porosity and good strength.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Recycling and utilization of industrial and municipal waste in materials production · Bauxite Residue and Utilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Leaching characteristics of fly ash10.1007/s00254-004-1100-6 ↗
2. Power station fly ash—a review of value-added utilization outside of the construction industry10.1016/S0921-3449(00)00084-7 ↗
3. Utilization and disposal of fly ash and other coal residues in terrestrial ecosystems: a review10.2134/jeq1980.00472425000900030001x ↗
4. Membrane processes for a sustainable industrial growth10.1039/c2ra22580h ↗
5. Recent developments in membrane treatment of spent cutting-oils: a review10.1021/ie4003552 ↗
6. Ceramic membranes for environmental related applications
7. Investigation of reinforcement of porous alumina by nickel aluminate spinel for its use as ceramic membrane10.1016/j.memsci.2013.05.025 ↗
8. Formatation of pore structure in tape-cast alumina membranes-effects of binder content and firing temperature10.1016/S0376-7388(97)00282-2 ↗
9. Direct preparation of macroporous mullite supports for membranes by in situ reaction sintering10.1016/j.memsci.2008.01.034 ↗
10. Cost-effective utilization of mineral-based raw materials for preparation of porous mullite ceramic membranes via in-situ reaction method10.1016/j.clay.2015.11.020 ↗
11. The effect of an alumina coating on the pore characteristics of a diatomite–kaolin composite support layer10.1016/j.ceramint.2014.04.157 ↗
12. Environment-oriented low-cost porous mullite ceramic membrane supports fabricated from coal gangue and bauxite10.1016/j.jhazmat.2014.03.026 ↗
13. Preparation of porous mullite–corundum ceramics with controlled pore size using bioactive yeast as pore-forming agent10.1016/j.matlet.2013.11.067 ↗
14. Elaboration of new ceramic microfiltration membranes from mineral coal fly ash applied to waste water treatment10.1016/j.jhazmat.2009.06.151 ↗
15. Preparation of a new ceramic microfiltration membrane from mineral coal fly ash: application to the treatment of the textile dying effluents10.1016/j.powtec.2010.08.039 ↗
16. Oily wastewater treatment using mullite ceramic membrane10.1080/19443994.2012.661249 ↗
17. Preparation of high performance mullite ceramics from high-aluminum fly ash by an effective method10.1016/j.jallcom.2014.11.023 ↗
18. Design of ceramic membrane supports: permeability, tensile strength and stress10.1016/S0376-7388(98)00335-4 ↗
19. Effect of the addition of polyvinylpyrrolidone as a pore-former on microstructure and mechanical strength of porous alumina ceramics10.1016/j.ceramint.2013.03.007 ↗
20. Preparation and characterization of low cost tubular ceramic support membranes using sawdust as a pore-former10.1016/j.matlet.2013.08.019 ↗
21. Effect of starch addition on microstructure and properties of highly porous alumina ceramics10.1016/j.ceramint.2013.04.072 ↗
22. Porous ceramic supports for membranes prepared from kaolin and doloma mixtures10.1016/j.jeurceramsoc.2005.03.244 ↗
23. Elaboration and characterization of tubular macroporous ceramic support for membranes from kaolin and dolomite10.1007/s10934-008-9258-z ↗
24. Preparation and characterization of mullite tubular membranes10.5004/dwt.2011.2431 ↗
25. Preparation and characterizations of ceramic microfiltration membrane: effect of inorganic precursors on membrane morphology10.1080/01496395.2010.503669 ↗
26. Permeability of diatomite layers processed by different colloidal techniques10.1016/S0955-2219(99)00139-9 ↗
27. Fabrication on porous alumina tube by centrifugal molding10.1016/j.jeurceramsoc.2004.08.019 ↗