journal article·2021-08

Fabrication of TiZrNbTaFeN high-entropy alloys coatings by HiPIMS: Effect of nitrogen flow rate on the microstructural development, mechanical and tribological performance, electrical properties and corrosion characteristics

Sameer Kamrudin Bachani, Chaur-Jeng Wang, Bih-Show Lou, Li-Chun Chang, Jyh-Wei Lee

Publisher page

Abstract

Abstract One TiZrNbTaFe and five (TiZrNbTaFe)N high entropy alloy coatings were deposited onto three different substrates using a high power impulse magnetron sputtering (HiPIMS) at different nitrogen gas flow ratios (RN2). The peak current and peak power density values of HiPIMS increased with increasing RN2. The crystalline nitride (TiZrNbTaFe)N coatings were obtained as grown using equal and higher than 10.0% RN2. The higher RN2 can promote a phase transformation from an amorphous state to face-centered cubic (fcc) structure. The fcc structured coatings exhibited a fine columnar microstructure and enhanced crystallinity. The highest hardness and reduced elastic modulus reached 36.2 GPa and 265 GPa, respectively, were found for the 32.0 at.% nitrogen contained (TiZrNbTaFe)N coating primarily due to its high residual stress and secondarily because of the formation of metal-nitride phase and the solid solution strengthening of various elements. The electrochemical properties of coatings in 3.5 wt.% NaCl aqueous solution at room temperature was studied using the potentiodynamic polarization and electrochemical impedance spectroscopy methods. We discovered that the highest corrosion polarization resistance of 3.08 × 106 Ω·cm2 was also obtained for 32.0 at.% nitrogen contained (TiZrNbTaFe)N coatings grown at RN2 of 10.0%. Based on these excellent properties, (TiZrNbTaFe)N high-entropy alloy nitride coating with 32.0 at.% nitrogen content can be used as a promising protective hard coating.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · High Entropy Alloys Studies · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (78)

Show source-provided references
1. 1 – A brief history of alloys and the birth of high-entropy alloys
2. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
3. Microstructural developments in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
4. Design of non-equiatomic medium-entropy alloys10.1038/s41598-018-19449-0 ↗
5. Solid-solution phase formation rules for multi-component alloys10.1002/adem.200700240 ↗
6. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
7. Formation of simple crystal structures in Cu-Co-Ni-Cr-Al-Fe-Ti-V alloys with multiprincipal metallic elements10.1007/s11661-006-0234-4 ↗
8. Physical metallurgy
9. Recent progress in high-entropy alloys10.3166/acsm.31.633-648 ↗
10. Microstructure, mechanical properties and corrosion performance of Fe44Cr15Mo14Co7C10B5Si5 thin film metallic glass deposited by DC magnetron sputtering10.1016/j.jnoncrysol.2019.119718 ↗
11. Effects of nitrogen content on microstructures and mechanical properties of (AlCrTiZrHf)N high-entropy alloy nitride films
12. Comparisons of plasma-sprayed and sputtering Al0.5CoCrFeNi2 high-entropy alloy coatings10.1016/j.surfcoat.2020.126411 ↗
13. Microstructural characterization, mechanical property and corrosion behavior of VNbMoTaWAl refractory high entropy alloy coatings: effect of Al content10.1016/j.surfcoat.2020.126351 ↗
14. Lattice-distortion-enhanced yield strength in a refractory high-entropy alloy10.1002/adma.202004029 ↗
15. A novel ultrafine-grained high entropy alloy with excellent combination of mechanical and soft magnetic properties10.1016/j.jmmm.2020.166513 ↗
16. The effect of molybdenum on the corrosion behaviour of the high-entropy alloys Co1.5CrFeNi1.5Ti0.5Mox in aqueous environments10.1016/j.corsci.2010.04.004 ↗
17. A review of the serrated-flow phenomenon and its role in the deformation behavior of high-entropy alloys10.3390/met10081101 ↗
18. Pierson · 1996
19. Synthesis of (Ti, Zr)N hard coatings by unbalanced magnetron sputtering10.1016/S0257-8972(00)00675-7 ↗
20. Composition, structure and mechanical properties of (Ti-Hf)N coatings on titanium alloy10.1134/S1063784219050190 ↗
21. Physical and mechanical properties of (Ti-Zr-Nb)N coatings fabricated by vacuum-arc deposition10.1134/S2075113316030047 ↗
22. FeMnNiCoCr-based high entropy alloy coatings: effect of nitrogen additions on microstructural development, mechanical properties and tribological performance10.1016/j.apsusc.2019.145101 ↗
23. Synthesis and characterization of super-hard AlCrTiVZr high-entropy alloy nitride films deposited by HiPIMS10.1016/j.apsusc.2020.146529 ↗
24. Microstructure and mechanical properties of (AlCrTiZrV)Nx high-entropy alloy nitride films by reactive magnetron sputtering10.1016/j.vacuum.2020.109706 ↗
25. Improving the hardness of high entropy nitride (Cr0.35Al0.25Nb0.12Si0.08V0.20)N coatings via tuning substrate temperature and bias for anti-wear applications10.1016/j.surfcoat.2020.126417 ↗
26. Structure, mechanical properties and thermal stability of nitrogen-doped TaNbSiZrCr high entropy alloy coatings and their application to glass moulding and micro-drills
27. Thermodynamics of ternary nitride formation by ammonolysis: application to lithium molybdenum nitride (LiMoN2), sodium tungsten nitride (Na3WN3), and sodium tungsten oxide nitride (Na3WO3N)10.1021/cm00034a027 ↗
28. Microstructure and mechanical, electrical, and electrochemical properties of sputter-deposited multicomponent (TiNbZrTa)Nx coatings10.1016/j.surfcoat.2020.125651 ↗
29. Thermal stability of superhard nitride coatings from high-entropy multicomponent Ti-V-Zr-Nb-Hf alloy10.1007/s11106-014-9560-z ↗
30. Microstructure, physical and chemical properties of nanostructured (Ti-Hf-Zr-V-Nb)N coatings under different deposition conditions10.1016/j.matchemphys.2014.06.062 ↗
31. Multicomponent Hf-Nb-Ti-V-Zr nitride coatings by reactive magnetron sputter deposition10.1016/j.surfcoat.2018.06.030 ↗
32. A novel pulsed magnetron sputter technique utilizing very high target power densities10.1016/S0257-8972(99)00292-3 ↗
33. High power pulsed magnetron sputtering: a review on scientific and engineering state of the art10.1016/j.surfcoat.2009.11.013 ↗
34. Influence of high power impulse magnetron sputtering plasma ionization on the microstructure of TiN thin films10.1063/1.3579443 ↗
35. High power impulse magnetron sputtering and its applications10.1088/2058-6272/aa9e48 ↗
36. Influences of target poisoning on the mechanical properties of TiCrBN thin films grown by a superimposed high power impulse and medium-frequency magnetron sputtering10.1016/j.surfcoat.2017.06.081 ↗
37. Target poisoning during CrN deposition by mixed high power impulse magnetron sputtering and unbalanced magnetron sputtering technique10.1116/1.4950886 ↗
38. Effects of duty cycle and pulse frequency on the fabrication of AlCrN thin films deposited by high power impulse magnetron sputtering10.1016/j.tsf.2013.08.059 ↗
39. Fully dense, non-faceted 111-textured high power impulse magnetron sputtering TiN films grown in the absence of substrate heating and bias10.1016/j.tsf.2010.05.064 ↗
40. The influence of deposition parameters on the structure and properties of aluminum nitride coatings deposited by high power impulse magnetron sputtering10.1016/j.tsf.2014.09.007 ↗
41. Goldstein · 2003 · 404
42. Texture evolution of vanadium nitride thin films10.1016/j.tsf.2019.137415 ↗
43. Antireflection coatings with SiOx-TiO2 multilayer structures10.7567/JJAP.53.11RA06 ↗
44. The tension of metallic films deposited by electrolysis10.1098/rspa.1909.0021 ↗
45. Calculated elastic constants for stress problems associated with semiconductor devices10.1063/1.1661935 ↗
46. ASTM C1624Standard test method for adhesion strength and mechanical failure modes of ceramic coatings by quantitative single point scratch testing ASTM International 2015.
47. Stansbury · 2000
48. Current-voltage-time characteristics of the reactive Ar/N2 high power impulse magnetron sputtering discharge10.1063/1.3653233 ↗
49. Ionized physical vapor deposition (IPVD): a review of technology and applications10.1016/j.tsf.2006.03.033 ↗
50. Effect of nitrogen-argon flow ratio on the microstructural and mechanical properties of AlSiN thin films prepared by high power impulse magnetron sputtering10.1016/j.surfcoat.2017.01.085 ↗
51. Thin-film evaporation processes10.1016/B978-012524975-1/50006-9 ↗
52. Influence of N content on structure and mechanical properties of multi-component Al-Cr-Nb-Y-Zr based thin films by reactive magnetron sputtering10.1016/j.surfcoat.2020.125614 ↗
53. Preparation and characterization of AlCrTaTiZr multi-element nitride coatings10.1016/j.surfcoat.2006.06.048 ↗
54. Mechanical properties and thermal stability of reactively sputtered multi-principal-metal Hf-Ta-Ti-V-Zr nitrides10.1016/j.surfcoat.2020.125674 ↗
55. Hard nanocomposite Zr-Y-N coatings, correlation between hardness and structure10.1016/S0257-8972(00)00560-0 ↗
56. Structure and mechanical properties of multi-element (AlCrMnMoNiZr)Nx coatings by reactive magnetron sputtering10.1016/j.jallcom.2013.01.148 ↗
57. Microstructure and mechanical properties of (AlCrTiZrV)Nx high-entropy alloy nitride films by reactive magnetron sputtering10.1016/j.vacuum.2020.109706 ↗
58. Cullity · 2001 · 169
59. Cullity · 2001 · 365
60. Influence of the nitrogen content on the structure and properties of MoNbTaVW high entropy alloy thin films10.1016/j.jallcom.2020.156740 ↗
61. Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy10.1016/j.jallcom.2011.02.171 ↗
62. A brief review of high-entropy films10.1016/j.matchemphys.2017.07.078 ↗
63. Mechanical properties of TiN thin film coatings on 304 stainless steel substrates10.1016/S0257-8972(01)01382-2 ↗
64. Nanohardness of nanocrystalline TiN thin films10.1016/j.surfcoat.2004.10.098 ↗
65. Influence of yttrium addition on microstructure and mechanical properties of ZrN coatings10.1016/j.surfcoat.2012.01.056 ↗
66. Evidence of inverse Hall-Petch behavior and low friction and wear in high entropy alloys10.1038/s41598-020-66701-7 ↗
67. Relationships between hardness, Young’s modulus and elastic recovery in hard nanocomposite coatings10.1016/S0257-8972(01)01714-5 ↗
68. On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimized tribological behaviour10.1016/S0043-1648(00)00488-9 ↗
69. A comprehensive model of stress generation and relief processes in thin films deposited with energetic ions10.1016/j.surfcoat.2005.02.161 ↗
70. Mechanical and tribological properties of multi-element (AlCrTaTiZr)N coatings10.1016/j.surfcoat.2008.01.014 ↗
71. Nanostructured multi-element (TiZrNbHfTa)N and (TiZrNbHfTa)C hard coatings10.1016/j.surfcoat.2011.09.033 ↗
72. Structural and mechanical properties of multi-element (AlCrMoTaTiZr)Nx coatings by reactive magnetron sputtering10.1016/j.tsf.2010.11.034 ↗
73. Contact and rubbing of flat surfaces10.1063/1.1721448 ↗
74. Influence of high power impulse magnetron sputtering pulse parameters on the properties of aluminum nitride coatings10.1016/j.surfcoat.2014.05.028 ↗
75. Epitaxial growth of TiN films on (100) silicon substrates by laser physical vapor deposition10.1063/1.107568 ↗
76. Corrosion behavior of Ti-Nb-Ta-Zr-Fe alloy for biomedical applications in Ringer’s solution10.1016/S1003-6326(15)63875-4 ↗
77. Thermal and corrosion properties of V-Nb-Mo-Ta-W and V-Nb-Mo-Ta-W-Cr-B high entropy alloy coatings10.1016/j.surfcoat.2019.07.079 ↗
78. Effect of nitrogen content on the corrosion resistance of Zr-Ni-Al-Si thin film metallic glass10.20964/2017.12.300 ↗