Microstructure, mechanical property and Hall-Petch relationship of a light-weight refractory Al0.1CrNbVMo high entropy alloy fabricated by powder metallurgical process
Source abstract
Abstract
Abstract A light-weight refractory Al0.1CrNbVMo high entropy alloy (HEA) was fabricated by high energy ball milling and spark plasma sintering (SPS). The alloy had a density of 7.96 g/cm3, which is lower than that of conventional Ni-base superalloys. Optimum milling time was decided by the microstructure analysis of the HEA powders. The microstructure of the bulk alloy consisted of a body-centered cubic (BCC) matrix with a minor amount of alumina inclusions. The Al0.1CrNbVMo HEA exhibited outstanding compressive mechanical properties of 2863 MPa at room temperature, and 1405 MPa at 1000 °C, respectively. The specific yield strength of 176 MPa cm3/g at 1000 °C, is much higher than that of the other refractory HEAs. The Hall-Petch coefficient of the Al0.1CrNbVMo alloy was derived to 811 MPa μ m 0.5.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. Recent progress in high-entropy alloys10.3166/acsm.31.633-648 ↗
2. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
3. Gludovatz · 2014 · vol. 345 · 1153
4. Effects of Mn, Ti and V on the microstructure and properties of AlCrFeCoNiCu high entropy alloy10.1016/j.msea.2008.08.025 ↗
5. Effect of aluminum on the microstructure and properties of two refractory high-entropy alloys10.1016/j.actamat.2014.01.029 ↗
6. Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys10.1016/j.intermet.2011.01.004 ↗
7. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
8. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
9. Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases10.1016/j.actamat.2016.06.063 ↗
10. Adhesive wear behavior of AlxCoCrCuFeNi high-entropy alloys as a function of aluminum content10.1016/j.wear.2005.12.008 ↗
11. The effect of boron on the corrosion resistance of the high entropy alloys Al[sub 0.5]CoCrCuFeNiB[sub x]10.1149/1.2744133 ↗
12. Microstructure and electrochemical properties of high entropy alloys-a comparison with type-304 stainless steel10.1016/j.corsci.2004.11.008 ↗
13. Development of a refractory high entropy superalloy10.3390/e18030102 ↗
14. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
15. Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system10.1016/j.actamat.2013.09.037 ↗
16. Effect of synthesis route on structure and properties of AlCoCrFeNi high-entropy alloy10.1016/j.intermet.2016.12.003 ↗
17. Tensile ductility of an AlCoCrFeNi multi-phase high-entropy alloy through hot isostatic pressing (HIP) and homogenization10.1016/j.msea.2015.08.078 ↗
18. Solidification behaviour in laser cladding of AlCoCrCuFeNi high-entropy alloy on magnesium substrates10.1016/j.jallcom.2013.10.254 ↗
19. Refractory high-entropy alloys10.1016/j.intermet.2010.05.014 ↗
20. Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy10.1016/j.jallcom.2011.02.171 ↗
21. Senary refractory high-entropy alloy HfNbTaTiVZr10.1007/s11661-015-3105-z ↗
22. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
23. Alloying behavior and deformation twinning in a CoNiFeCrAl0.6Ti0.4 high entropy alloy processed by spark plasma sintering10.1016/j.jallcom.2012.11.146 ↗
24. Microstructure and mechanical properties of Ni1,5Co1,5CrFeTi0,5 high entropy alloy fabricated by mechanical alloying and spark plasma sintering10.1016/j.matdes.2017.01.036 ↗
25. Powder metallurgy processing of a WxTaTiVCr high-entropy alloy and its derivative alloys for fusion material applications10.1038/s41598-017-02168-3 ↗
26. Ultra-high strength WNbMoTaV high-entropy alloys with fine grain structure fabricated by powder metallurgical process10.1016/j.msea.2017.12.021 ↗
27. Enhanced strength of a mechanical alloyed NbMoTaWVTi refractory high entropy alloy10.3390/ma11050669 ↗
28. Ultra-high strength TiC/refractory high-entropy-alloy composite prepared by powder metallurgy10.1007/s11837-017-2267-0 ↗
29. Transition in microstructural and mechanical behavior by reduction of sigma-forming element content in a novel high entropy alloy10.1016/j.matdes.2018.02.036 ↗
30. Processing, microstructure and properties of Ni1.5CoCuFeCr0.5???xVx high entropy alloys with carbon introduced from process control agent10.1016/j.jallcom.2016.10.288 ↗
31. Microstructure and strengthening mechanisms in an FCC structured single-phase nanocrystalline Co25Ni25Fe25Al7.5Cu17.5 high-entropy alloy10.1016/j.actamat.2016.01.050 ↗
32. Effect of Al on structure and mechanical properties of AlxNbTiVZr (x = 0, 0.5, 1, 1.5) high entropy alloys10.1179/1743284715Y.0000000032 ↗
33. Solid-solution phase formation rules for multi-component alloys10.1002/adem.200700240 ↗
34. Prediction of high-entropy stabilized solid-solution in multi-component alloys10.1016/j.matchemphys.2011.11.021 ↗
35. Phase stability in high entropy alloys: formation of solid-solution phase or amorphous phase10.1016/S1002-0071(12)60080-X ↗
36. A new thermodynamic parameter to predict formation of solid solution or intermetallic phases in high entropy alloys10.1016/j.jallcom.2015.10.279 ↗
37. Predicting the formation and stability of single phase high-entropy alloys10.1016/j.actamat.2015.11.040 ↗
38. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys10.1063/1.3587228 ↗
39. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
40. Densification of Al 2 O 3 powder using spark plasma sintering10.1557/JMR.2000.0140 ↗
41. Hot consolidation and mechanical properties of nanocrystalline equiatomic AlFeTiCrZnCu high entropy alloy after mechanical alloying10.1007/s10853-010-4246-5 ↗
42. Reducibility of oxides and sulfides in metallurgical processes
43. Alloying behavior and novel properties of CoCrFeNiMn high-entropy alloy fabricated by mechanical alloying and spark plasma sintering10.1016/j.intermet.2014.08.008 ↗
44. Microstructure and mechanical properties of twinned Al0.5CrFeNiCo0.3C0.2 high entropy alloy processed by mechanical alloying and spark plasma sintering10.1016/j.matdes.2013.08.099 ↗
45. High-entropy alloys – a new era of exploitation10.4028/www.scientific.net/MSF.560.1 ↗
46. The deformation and ageing of mild steel III Discussion of results∖t10.1088/0370-1301/64/9/303 ↗
47. Enhanced strength and ductility of bulk CoCrFeMnNi high entropy alloy having fully recrystallized ultrafine-grained structure10.1016/j.matdes.2017.07.054 ↗
48. Argon · 2007
49. High temperature deformation mechanism in hierarchical and single precipitate strengthened ferritic alloys by in situ neutron diffraction studies10.1038/srep45965 ↗
50. Strengthening mechanisms in a high-strength bulk nanostructured Cu-Zn-Al alloy processed via cryomilling and spark plasma sintering10.1016/j.actamat.2012.09.036 ↗
51. The effect of hydrogen on the Young's modulus of tantalum, niobium and vanadium10.1016/0036-9748(74)90239-7 ↗
52. Grain-boundary strengthening in nanocrystalline chromium and the Hall-Petch coefficient of body-centered cubic metals10.1016/j.scriptamat.2012.09.025 ↗
53. Alloying, thermal stability and strengthening in spark plasma sintered AlxCoCrCuFeNi high entropy alloys10.1016/j.jallcom.2013.08.176 ↗
54. Hansen · 2004 · vol. 51 · 801
55. Juan · 2015 · vol. 81 · 300
56. Preparation and properties of medium entropy CoCrNi/boride metal matrix composite10.1016/j.jallcom.2018.03.204 ↗
57. Microstructure and properties of a refractory NbCrMo0.5Ta0.5TiZr alloy10.1016/j.msea.2011.09.033 ↗
58. Low-density, refractory multi-principal element alloys of the Cr-Nb-Ti-V-Zr system: microstructure and phase analysis10.1016/j.actamat.2012.11.032 ↗
59. Simultaneously increasing the strength and ductility of a refractory high-entropy alloy via grain refining10.1016/j.matlet.2016.08.060 ↗
60. Enhanced mechanical properties of HfMoTaTiZr and HfMoNbTaTiZr refractory high-entropy alloys10.1016/j.intermet.2015.03.013 ↗
61. Oxide dispersion strengthened CoCrFeNiMn high-entropy alloy10.1016/j.msea.2017.02.068 ↗
62. Grain boundary sliding at high temperature deformation in cold-rolled ODS ferritic steels10.1016/j.jnucmat.2014.05.040 ↗
63. Effect of composing element on microstructure and mechanical properties in Mo–Nb–Hf–Zr–Ti multi-principle component alloys10.1016/j.intermet.2015.10.011 ↗
64. Structure and mechanical properties of a light-weight AlNbTiV high entropy alloy10.1016/j.matlet.2014.11.162 ↗
65. Grain growth and the Hall-Petch relationship in a high-entropy FeCrNiCoMn alloy10.1016/j.scriptamat.2012.12.002 ↗
66. Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys10.1016/j.actamat.2013.01.042 ↗
67. Friction stir processing of a high entropy alloy Al0.1CoCrFeNi10.1007/s11837-015-1385-9 ↗
68. Strengthening mechanisms in equiatomic ultrafine grained AlCoCrCuFeNi high-entropy alloy studied by micro- and nanoindentation methods10.1016/j.actamat.2016.11.046 ↗
69. Superior high tensile elongation of a single-crystal CoCrFeNiAl0.3 high-entropy alloy by Bridgman solidification10.1016/j.intermet.2014.05.018 ↗