A clean disposal method of carbide slag with carbon emission reduction: Used as a flux for iron ore sintering
Source abstract
Abstract
Limestone or quicklime is a necessary flux in the iron ore sintering process. Its production and application process will cause CO 2 emissions and various environmental pollution, but this has not attracted enough attention. Carbide slag (CS) is a calcium-rich solid waste produced in acetylene production, the harmless disposal of which is still incomplete, resulting in soil and groundwater pollution. This study investigated the granulation characteristics and sintering performance of the sintering mixture with different proportions of CS. The results show that replacing limestone with an appropriate proportion of CS is promising and beneficial to the formation of high-quality bonding phase. When CS accounts for 75% of the total mass of CS and limestone, the tumbler index increases by 8.10% and the comprehensive index decreases only from 100 to 96.16, which is within the acceptable range. The application of CS in iron ore sintering can achieve a clean disposal of it and a considerable carbon emission reduction, as the main component of which is Ca(OH) 2.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Iron and Steelmaking Processes · Advanced materials and composites · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Thermodynamic and mineralogical aspects of injecting LPG, coke oven gas, and oxygen into goethitic iron ore sintering process10.1007/s40831-020-00327-x ↗
2. Rate-limiting mechanism in iron ore sintering process with waste gas recycling10.1007/s12666-020-02162-w ↗
3. Carbide lime and industrial hydrated lime characterization10.1016/j.powtec.2009.05.017 ↗
4. Comparison of the catalytic effects of eight industrial wastes rich in Na, Fe, Ca and Al on anthracite coal combustion10.1016/j.fuel.2016.09.083 ↗
5. Ding · 2019
6. Effect of ore properties on sinter bed permeability and strength10.1179/174328107X165726 ↗
7. Evaluation of porous calcium silicate hydrate derived from carbide slag for removing phosphate from wastewater10.1016/j.cej.2018.08.001 ↗
8. Sintering characteristics of fluxes and their structure optimization10.1007/s12613-011-0433-x ↗
9. High temperature mineralization behavior of mixtures during iron ore sintering and optimizing methods10.2355/isijinternational.55.742 ↗
10. Recycling and utilization of calcium carbide slag - current status and new opportunities10.1016/j.rser.2022.112133 ↗
11. Effect of the existing state of coke breeze in quasi-particles of raw mix on coke combustion in the sintering process10.2355/tetsutohagane1955.68.3_400 ↗
12. Variation in iron ore sinter mineralogy with changes in basicity10.3390/min12101249 ↗
13. Case study of a novel low rank coal to calcium carbide process based on techno-economic assessment10.1016/j.energy.2021.120566 ↗
14. An environment-friendly process for limestone calcination with CO2 looping and recovery10.1016/j.jclepro.2019.118147 ↗
15. Environmental impact assessment of limestone quarry using multispectral satellite imagery10.1007/s12145-022-00845-0 ↗
16. Effect of coating structure of granulated quasi-fuel particles in iron ore sintering10.1002/apj.2629 ↗
17. Life cycle assessment of comprehensive utilization of calcium carbide slag in cement kiln10.4028/www.scientific.net/MSF.993.1487 ↗
18. Sintering characteristics of iron ore blends containing high proportions of goethitic ores10.1007/s11837-020-04477-x ↗
19. Forming behavior of fine particulate matters during iron ore sintering process10.2355/isijinternational.ISIJINT-2019-637 ↗
20. Management of lime in steel10.3390/met8090686 ↗
21. Effect of moisture on the granulation and sintering characteristics of sinter materials with carbide slag as a flux10.1016/j.powtec.2023.118865 ↗
22. Utilization of sludge templated carbide slag pellets for simultaneous desulfurization and denitrification: Low and moderate temperatures and synergetic mechanism
23. Iron ore granulation for sinter production: Developments, progress, and challenges10.2355/isijinternational.ISIJINT-2022-460 ↗
24. Permanent deformation behaviour of black cotton soil treated with calcium carbide residue10.1016/j.conbuildmat.2019.07.010 ↗
25. Effect of high-phosphorous iron ore distribution in quasi-particle on melt fluidity and sinter bed permeability during sintering10.2355/isijinternational.49.650 ↗
26. Desulphurization mechanism and engineering practice of carbide slag10.1007/s11356-022-21894-4 ↗
27. Reaction sequences in the formation of silico-ferrites of calcium and aluminum in iron ore sinter10.1007/s11663-004-0087-4 ↗
28. Production of acetylene and acetylene-based chemicals from coal10.1021/cr400276u ↗
29. CO2 emissions from China's lime industry10.1016/j.apenergy.2015.04.091 ↗
30. Influence of limestone particle size on iron ore sinter properties and productivity10.1002/srin.201000020 ↗
31. Influence of limestone particle size on iron ore sinter properties and productivity10.1002/srin.201000020 ↗
32. A novel environmental restoration method for an abandoned limestone quarry with a deep open pit and steep palisades: A case study10.1098/rsos.180365 ↗
33. Compound use of chemical waste as flux in iron ore sintering10.1007/s11663-022-02514-5 ↗
34. Effect of thermodynamic melt formation characteristics on liquid phase fluidity of iron ore in the sintering process10.3390/met9040404 ↗
35. Sintering behavior of return fines and their effective utilization method10.2355/isijinternational.53.1561 ↗
36. Thermodynamics and kinetics analysis of Ca-looping for CO2 capture: Application of carbide slag10.1016/j.fuel.2019.01.018 ↗
37. Thermal decomposition kinetics of carbide slag in air atmosphere
38. Synergic effects of electrolytic manganese residue-red mud-carbide slag on the road base strength and durability properties10.1016/j.conbuildmat.2019.06.009 ↗
39. The production of large blast furnaces of China in 201710.1080/03019233.2018.1518688 ↗
40. Evaluating the permeability properties of green bed in iron ore sintering using high resolution X-ray computed tomography and orthogonal array tests10.1016/j.powtec.2020.08.007 ↗
41. Influence of MgO in form of magnesite on properties and mineralogy of high chromium, vanadium, titanium magnetite sinters10.1179/1743281214Y.0000000223 ↗
42. Flame front propagation and sinter strength properties of permeable sintering bed prepared via enhanced granulation with hydrated lime10.1002/apj.2592 ↗
43. Evaluation of granule structure and strength properties of green packed beds in iron ore sintering using high-resolution X-ray tomography and uniaxial compression testing10.1016/j.partic.2020.12.005 ↗
44. Evaluation of compressive strength and shear strength of the adhering layer of granules in iron ore sintering10.1016/j.powtec.2018.07.051 ↗
45. Factors controlling high-temperature zone resistance to airflow during iron ore sintering10.2355/isijinternational.ISIJINT-2015-311 ↗
46. Effect of coke rate and basicity on computed tomography-measured pore parameters and effective thermal conductivity of iron ore sinter10.1016/j.jmrt.2019.10.013 ↗
47. Influence of binder dosage on granule structure and packed bed properties in iron ore sintering process10.2355/isijinternational.ISIJINT-2016-298 ↗
48. Characterization of granule structure and packed bed properties of iron ore sinter feeds that contain concentrate10.2355/isijinternational.ISIJINT-2016-734 ↗
49. High efficiency desulfurization behavior by the sustainable low carbon utilization of carbide slag10.1016/j.psep.2022.01.041 ↗